SC9S08QE16SCLCR 8-Bit S08 Microcontroller | NXP
料号： SC9S08QE16SCLCR ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $2.2595 | $2.26 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
SC9S08QE16SCLCR 概述
An 8-bit microcontroller is a compact embedded controller that combines a processor core, memory, and peripherals on one semiconductor package. The HCS08 family belongs to the broader embedded-processing hierarchy: microcontroller unit, embedded processor, semiconductor, and electronic component. Such devices are used to read sensors, control actuators, sequence operations, and manage communication or human-interface functions in compact equipment.
The verified product listing confirms the SC9S08QE16SCLCR identity and identifies the device as an 8-bit HC08/S08 microcontroller. The LCSC result additionally reports a starting price of $2.2595, but the supplied records do not establish standardized quantity-break pricing, complete ordering information, or a manufacturer-authorized lifecycle classification for this exact orderable MPN.
Because the retrieved data does not include a technical datasheet parameter table, details such as processor speed, flash and RAM size, I/O count, supply voltage, timers, communication interfaces, and operating temperature cannot be safely inferred from the part number. Engineers should therefore treat those values as unavailable until verified from the official S08QE16 documentation and the relevant package data sheet.
Potential HC08/S08 applications include compact motor controllers, simple industrial modules, appliance controls, sensor nodes, and embedded instrumentation. Suitability depends on the verified memory map, peripheral set, pin multiplexing, clock requirements, and operating conditions rather than the distributor description alone.
Before designing a PCB, verify the exact pinout, exposed-pad requirements, recommended decoupling, programming interface, clock components, and analog or communications peripherals in the official documentation. Do not treat a generic cross-reference result as proof of firmware, peripheral, timing, or pin-level compatibility.
This page consolidates the verified distributor identity, commercial snapshot, package-related procurement links, and source traceability. Its key information gain is the separation of confirmed facts from unverified engineering parameters, helping buyers evaluate sourcing without presenting guesses as manufacturer specifications.
SC9S08QE16SCLCR 最大额定值与电气特性
| Product Type | 8-bit HCS08/HC08/S08 microcontroller |
| Manufacturer | Freescale Semiconductor / NXP Semiconductors |
| Part Number | SC9S08QE16SCLCR |
| Processor Architecture | 8-bit |
| Series | HC08/S08 |
| Package Type | LQFP |
| 安装类型 | Surface mount |
| LCSC Starting Price | $2.2595 |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Status | unknown |
SC9S08QE16SCLCR lqfp 引脚配置指南
SC9S08QE16SCLCR（lqfp 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： SC9S08QE16SCLCR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SC9S08QE16SCLCR 适用于 6 应用s: Compact Appliance Controller, Industrial Sensor Interface, Simple Motor Sequencing, Sensor Node, Human Interface Panel, Programmable Logic Controller.
Compact Appliance Controller
The SC9S08QE16SCLCR is a candidate for compact appliance control only after its clock, memory, I/O, and timer resources are verified against the control plan. An 8-bit HC08/S08-class controller could monitor switches, operate indicators, sequence motors or relays, and enforce simple safety timing without a higher-complexity processor. The verified records establish an 8-bit HC08/S08 microcontroller, but they do not specify the exact QE16 resources. Engineers should therefore validate pin mapping, electrical limits, firmware timing, and production test coverage against the official datasheet.
推荐
Industrial Sensor Interface
The SC9S08QE16SCLCR could support a small industrial sensor interface when its verified I/O count, analog capabilities, supply range, and timing meet the design requirements. Suitable controller tasks may include conditioning a digital sensor output, tracking a slow analog threshold, applying debounce logic, recording operating state, and reporting status through a board-level serial link. Because those specifications are absent from the supplied excerpts, selection must include direct verification of electrical ratings, peripheral multiplexing, ESD requirements, and environmental qualification rather than reliance on the generic 8-bit label.
推荐
Simple Motor Sequencing
The SC9S08QE16SCLCR may fit a basic motor-sequencing module if its verified timer, pulse-width modulation, interrupt, and I/O capabilities match the motor-driver requirements. An embedded controller can translate external commands into ordered drive outputs, add minimum on-times, detect simple timeout conditions, and provide a safe default state after reset. The verified listing does not disclose those peripherals or the exact package pins. Design review must therefore confirm motor-interface isolation, inductive transient protection, watchdog behavior, and whether firmware timing remains valid before production use.
推荐
Sensor Node
The SC9S08QE16SCLCR is suitable for consideration in a small sensor node only when its verified memory and power characteristics support periodic acquisition, local processing, and communication. Potential functions include sampling a sensor, applying threshold logic, updating a status indicator, and activating a low-power duty cycle. The current evidence confirms only the 8-bit HC08/S08 category and commercial identity. Engineers must obtain the official electrical data for active current, sleep behavior, clock setup, RAM retention, and communication peripherals before estimating battery life or defining the node's duty cycle.
推荐
Human Interface Panel
The SC9S08QE16SCLCR could manage a compact human-interface panel if its verified GPIO, timers, memory, and communication interfaces satisfy the display and input requirements. An 8-bit controller may scan switches, update LEDs, generate tones, store calibration values, and drive a host processor. The provided distributor snippets do not identify these resources, so designers should not assume display timing, serial compatibility, debounce capacity, or nonvolatile storage. Pin multiplexing, interrupt latency, firmware architecture, and user-interface timing must be validated on the final hardware.
推荐
Programmable Logic Controller
The SC9S08QE16SCLCR may be evaluated for a small programmable logic controller or fixed-function automation module when its verified real-time performance and I/O capacity match the task. Possible duties include scanning discrete inputs, executing deterministic logic, updating outputs, and operating a local status interface. The supplied evidence does not provide interrupt latency, timer resolution, memory, or supply specifications. Any deployment therefore needs worst-case execution analysis, input filtering, output fail-safe design, watchdog verification, environmental qualification, and proof that software built for the exact device remains deterministic.
推荐
推荐产品汇总
工程参考数据： SC9S08QE16SCLCR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | NXP Semiconductors |
| Package | LQFP-family package indication; exact pin count not supplied |
| Processor Architecture | 8-bit |
| Series | HC08/S08 |
| Starting Price as of 2026-10-20 | $2.2595 |
| Drop-In Verification | No verified substitute in supplied data |
设计说明
合规信息
The verified search results provide no manufacturer compliance declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict minerals. No compliance claim should be inferred from the legacy origin or distributor category.
