SN65LVDS100DGKR - 2Gbps LVDS/LVPECL/CML Repeater | TI
料号： SN65LVDS100DGKR ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $3.9 | $3.90 |
| 10 | $3.62 | $36.20 |
| 100 | $3.34 | $334.00 |
| 500 | $3.05 | $1,525.00 |
| 1,000 | $2.85 | $2,850.00 |
SN65LVDS100DGKR 概述
A differential repeater is an interface IC that receives a high-speed differential signal, regenerates it through an internal receiver-driver chain, and retransmits a clean copy on the output side. In the signal-chain hierarchy, repeaters sit between the physical differential line (per EIA/TIA-644 LVDS and related PECL/CML standards) and the end receiver, restoring degraded amplitude and edge quality on long backplanes, cables, and clock-distribution networks.
Key features include signaling rates up to 2 Gbps, low part-to-part skew (100 ps max class), and a built-in VBB bias output of typically 1.35 V below VCC, which lets the receiver accept single-ended 3.3 V PECL inputs directly. The device is also positioned by TI as a low-power alternative to the MC100EP16 ECL buffer, and is qualified for automotive applications.
Inside, a high-speed differential receiver with input hysteresis accepts LVDS, LVPECL, or CML levels and drives an LVDS-compliant differential output, effectively decoupling the transmit side from input-level variations. This level translation removes the need for external bias networks or level-shifting discretes, reducing BOM count and jitter contribution compared with cascaded discrete buffers.
Typical applications include clock and data signal regeneration in telecom and networking line cards, PCIe/serial-link signal integrity recovery on long PCB traces, and test-and-measurement signal distribution where 2-Gbps edges must be preserved. The automotive qualification also supports infotainment and camera-link repeater use.
For design, decouple VCC with at least 0.1 uF ceramic capacitors close to the supply pins, route the differential pair with controlled impedance (100 ohm LVDS), and keep the VBB bypass path quiet for single-ended PECL use.
This page synthesizes distributor pricing (LCSC, DigiKey, Mouser), drop-in same-package alternatives, and design notes that go beyond the raw datasheet parameters.
直接替换替代料： SN65LVDS100DGKR ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： SN65LVDS100DGKR （相同外形与封装尺寸） ——差异在于 Function, Input Signal Types, Package, Part-to-Part Skew, Supply Voltage.
快速对比工具——选择替代料号进行并排对比：
SN65LVDS101DGKR
✅ 直接替换📋 参考替代料（不在目录中）
SN65LVDT100DGKR
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$1.72 / 个
查看数据手册 →SN65LVDT101DGKR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
SN65CML100DGK
✅ 直接替换📋 参考替代料（不在目录中）
SN65LVDS179DGKR
✅ 直接替换📋 参考替代料（不在目录中）
SN65LVDS100DGKR 规格参数
| 功能 | Differential buffer / repeater / translator |
| Input Signal Types | LVDS, LVPECL, CML, single-ended PECL (via VBB) |
| Output Signal Type | LVDS |
| Data / Signaling Rate | 2 Gbps |
| Part-to-Part Skew | 100 ps (max) |
| VBB Reference Output | Typically 1.35 V below VCC |
| 电源电压 | 3.3 V |
| ESD Protection (HBM) | Exceeds 2000 V (MIL-STD-883, Method 3015) |
| ESD Protection (MM) | Exceeds 200 V (200 pF machine model) |
| Interface Standard | EIA-644 / TIA-644 (LVDS) |
| 工作温度范围 | -40C to +85C |
| 封装 | VSSOP (DGK), 8 pins |
| 安装类型 | Surface Mount |
| Automotive Qualification | Qualified for automotive applications |
| Number of Channels | 1 (receiver + driver as repeater) |
SN65LVDS100DGKR vssop (dgk), 8 pins 引脚配置指南
SN65LVDS100DGKR（vssop (dgk), 8 pins 封装）的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据： SN65LVDS100DGKR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SN65LVDS100DGKR 适用于 6 应用s: High-Speed Clock Distribution, Telecom and Networking Line Cards, Automotive Camera and Display Links, Test and Measurement Signal Distribution, Backplane and Cable Signal Integrity Recovery, PECL to LVDS Level Translation.
High-Speed Clock Distribution
The SN65LVDS100DGKR regenerates clock signals up to 2 Gbps across large PCBs and backplanes, where trace loss and reflections degrade LVDS/LVPECL edge quality. Its 100 ps maximum part-to-part skew preserves timing margins in multi-branch clock trees, and the LVDS output re-drives the tree with clean edges regardless of input level degradation. Place the repeater roughly halfway along long clock spines; each regeneration stage resets amplitude and slew, letting the network scale beyond the reach of a single driver. Keep input and output differential pairs 100-ohm controlled impedance with matched lengths, and decouple VCC locally so supply ripple does not add deterministic jitter to the regenerated clock.
推荐
Telecom and Networking Line Cards
In telecom shelf and line-card designs, serial data and reference clocks travel between cards across connectors and long traces, accumulating intersymbol interference. The SN65LVDS100DGKR accepts the degraded LVDS, LVPECL, or CML waveform and retransmits a standardized LVDS signal at up to 2 Gbps, restoring eye opening before the destination receiver. Its single-ended PECL reception mode via the VBB reference (typically 1.35 V below VCC) allows direct interfacing with legacy 3.3 V PECL links without external bias networks. The -40C to +85C rating and automotive qualification support carrier-grade and harsh-environment equipment, while the VSSOP-8 footprint fits dense front-panel circuitry.
推荐
Automotive Camera and Display Links
Automotive infotainment and ADAS camera links route high-speed serialized video over harnesses where LVDS amplitude attenuates. The SN65LVDS100DGKR, qualified for automotive applications and rated -40C to +85C, re-drives these differential streams at 2 Gbps, extending link budget without changing the serialization scheme. Because the output is standard LVDS (EIA/TIA-644), it feeds downstream deserializers directly. Use AC-coupled inputs where CML sources are involved and keep the differential pair impedance continuous across connectors to limit reflections. The low-power operation relative to ECL buffers such as the MC100EP16 also reduces module thermal load in sealed camera housings.
推荐
Test and Measurement Signal Distribution
Instrumentation requiring distribution of fast triggers, reference clocks, or data patterns benefits from the SN65LVDS100DGKR's low skew (100 ps max part-to-part) and level-agnostic input acceptance. Bench instruments often mix PECL, CML, and LVDS sources; the repeater normalizes all of them to clean LVDS output, simplifying trigger trees across modules. At 2-Gbps capability, it supports multi-gigabit pattern generators and scope trigger distribution. For best jitter performance, power the repeater from a low-noise linear rail and reserve switching converters for non-timing loads. The VSSOP-8 package allows dense fan-out cards where every square millimeter counts.
推荐
Backplane and Cable Signal Integrity Recovery
Long 100-ohm differential traces and cable assemblies attenuate and disperse LVDS signals; inserting the SN65LVDS100DGKR as an inline repeater splits the channel into shorter segments, each with a full-swing LVDS start. The input hysteresis suppresses low-level noise and slow edges from being falsely retransmitted, while the LVDS driver restores the standard 350 mV nominal swing. This technique is standard practice in PICMG-style backplanes and industrial serial links operating near the 2-Gbps ceiling. Budget the insertion as one regeneration point per 30-50 cm of FR4 at maximum rate, adjusted per stackup loss, and verify eye width at the far-end receiver.
推荐
PECL to LVDS Level Translation
Designs bridging legacy 3.3 V PECL logic to modern LVDS blocks can use the SN65LVDS100DGKR as an active translator: LVPECL inputs are accepted directly, and single-ended PECL signals are received using the on-chip VBB reference of typically 1.35 V below VCC, eliminating resistor-divider bias networks and AC-coupling discretes. The LVDS output then drives 100-ohm differential loads per TIA-644. Compared with discrete transistor translation, this yields lower skew, better waveform symmetry, and fewer BOM parts. Bypass VBB with a local capacitor, and AC-couple single-ended sources so DC offsets do not consume receiver headroom.
推荐
推荐产品汇总
工程参考数据： SN65LVDS100DGKR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SN65LVDS101DGKR | SN65LVDT100DGKR | SN65CML100DGK | SN65LVDS179DGKR |
|---|---|---|---|---|---|
| Package | VSSOP-8 (DGK) | VSSOP-8 (DGK) - same | VSSOP-8 (DGK) - same | VSSOP-8 (DGK) - same | VSSOP-8 (DGK) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Function | LVDS/LVPECL/CML to LVDS repeater/translator | Same repeater, no VBB | T-family repeater, different drive class | Unidirectional CML translator | Half-duplex LVDS transceiver |
| Input Types | LVDS, LVPECL, CML, single-ended PECL via VBB | LVDS, LVPECL, CML (differential only) | LVDS, LVPECL, CML | CML | LVDS (transceiver) |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
关键差异点
- Universal input acceptance with VBB single-ended mode （对比 SN65LVDS101DGKR)
- Lower-power alternative to ECL buffering （对比 MC100EP16)
- Dedicated repeater rather than transceiver （对比 SN65LVDS179DGKR)
设计说明
Route the input and output differential pairs as 100-ohm controlled-impedance LVDS with intra-pair length matching within 5 mil. At 2 Gbps, keep stubs under 50 mil and avoid mid-trace vias; if layer transitions are unavoidable, add ground return vias adjacent to each signal via. Place the SN65LVDS100DGKR so the longest attenuation segment is on the input side, where the repeater's hysteresis and regenerated output reset the channel budget.
Decouple VCC with 0.1 uF ceramic within 2 mm of the supply pin plus 1 uF bulk per device. Supply noise converts directly into deterministic jitter at 2-Gbps edges, so isolate the repeater rail from switching-regulator loads with an LC filter or a small LDO. When using the VBB output for single-ended PECL reception, bypass VBB with a dedicated capacitor to ground; never load VBB with DC current, as it is a reference, not a supply.
Do not substitute SN65LVDS101 for SN65LVDS100 if the design uses single-ended PECL inputs - the LVDS101 lacks the VBB reference required for that mode. Also confirm input DC levels when AC-coupling CML sources: the input common-mode range must accommodate the source bias, so use the coupling network values given in the TI datasheet application section rather than generic values.
合规信息
RoHS-compliant green packaging per TI production status and LCSC listing. Data states qualification for automotive applications; verify specific AEC-Q100 grade via TI quality documentation. REACH and halogen-free status to be confirmed from TI material declaration.
