STA381BWSTR - 2.1-Channel Digital Audio | STMicroelectronics
料号: STA381BWSTR ✓ 量产中STA381BWSTR 概述
A digital audio processor is an application-specific integrated circuit that accepts digital or analog audio, performs control and signal-path functions, and drives an audio output stage. Within the broader semiconductor hierarchy, the STA381BWSTR belongs to the amplifier IC and audio processor category. It is a system-oriented alternative to combining a digital audio decoder, preamplifier, volume-control circuit, and conventional power amplifier in a larger design.
The principal features include embedded short-circuit, thermal, overcurrent, and undervoltage protection. The operating supply range reaches 25.5 V, while the absolute maximum supply rating is 27 V. I2C control with a selectable device address supports configuration and register access by a host controller. The 1 Vrms stereo analog input gives an external source interface, while the I2S interface provides a digital audio path at up to the stated 32 kHz sampling rate.
The STA381BWSTR integrates processing and amplification functions into one device, reducing the number of external blocks required for a typical 2.1-channel output stage. Its 48-VQFN package also consolidates the footprint into a 7 x 7 mm land pattern, but its exposed thermal pad requires careful PCB heat spreading. Protection functions improve robustness by limiting damage from abnormal output conditions, although the final design must still provide suitable passive components, speaker loads, and thermal paths.
Typical uses include compact multimedia speakers, active soundbars, portable entertainment systems, smart displays, and other consumer audio products. A host processor can use I2C to set operating parameters, while an I2S source supplies digital audio. Alternatively, the stereo analog input can accept a line-level signal from another audio source. These configurations make the device useful when designers need local channel amplification without implementing a discrete power-amplifier board.
The primary design consideration is power management. Because the device combines amplification and processing, its exposed-pad layout, output-filter components, supply decoupling, and grounding directly affect stability, thermal performance, and audio behavior. Use the manufacturer datasheet for the exact pin assignment, recommended application circuit, output configuration, and acoustic or electrical performance limits before releasing a PCB.
直接替换替代料: STA381BWSTR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料STA381BWSTR 最大额定值与电气特性
| Product Type | Fully integrated 2.1-channel digital audio processor |
| Channel Configuration | 2.1 channels |
| Supply Voltage Operating Range | 4.5 V to 25.5 V |
| Absolute Maximum Supply Voltage | 27 V |
| Analog Audio Input | 1 Vrms stereo |
| Digital Audio Interface | I2S |
| I2S Sampling Rate | 32 kHz |
| Control Interface | I2C with selectable device address |
| Short-Circuit Protection | Output-to-GND, output-to-VCC, and output-to-output |
| Thermal Protection | Embedded |
| 过流保护 | Embedded |
| Undervoltage Protection | Embedded |
| 封装 | 48-VQFN, 7 x 7 mm |
| Package Type | Exposed-pad VQFN |
| 安装类型 | Surface mount |
| Packaging | Tape and reel |
| Lead-Free Status | Lead free |
STA381BWSTR exposed-pad vqfn 引脚配置指南
STA381BWSTR(exposed-pad vqfn 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: STA381BWSTR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STA381BWSTR 适用于 6 应用s: Compact Active Multimedia Speaker, 2.1-Channel Soundbar, Digital Active Loudspeaker, Smart Display Audio, Portable Entertainment Speaker, Digital Audio Source Monitor.
Compact Active Multimedia Speaker
The STA381BWSTR fits a compact active multimedia speaker that requires digital source support, local volume control, and two-channel amplification in a small board area. The 48-VQFN 7 x 7 mm package leaves more room for connectors and passive components than a discrete decoder-plus-amplifier design. Its 4.5 V to 25.5 V operating supply supports a broad range of powered speaker architectures, while I2C lets a host configure volume and operating parameters. The 1 Vrms stereo analog input also permits fallback from a line-level source. Final output-network values, speaker impedance, and thermal performance must be selected from the manufacturer application circuit and electrical limits.
推荐
2.1-Channel Soundbar
The STA381BWSTR is suited to a 2.1-channel soundbar in which left and right channels and a subwoofer are managed from one compact audio IC. Its integrated digital audio system simplifies signal routing, while the I2S interface accepts digital program audio and I2C provides host control. The 4.5 V to 25.5 V supply range is useful in powered enclosures using higher-voltage rails. Embedded short-circuit, thermal, overcurrent, and undervoltage protection improves resilience, but the designer must still validate channel limits, crossover or filter arrangements, speaker loading, and the thermal path from the exposed VQFN pad. The 1 Vrms analog input supports legacy sources if required.
推荐
Digital Active Loudspeaker
A digital active loudspeaker can use the STA381BWSTR to combine an I2S audio stream, local processing, and a 2.1-channel output stage in a space-constrained driver enclosure. The interface supports a stated 32 kHz sampling rate, making it relevant for designs centered on speech, compact entertainment audio, or synchronized playback. Selectable-address I2C control permits configuration from the speaker's main controller and can assist multi-speaker systems. Before production, verify the supported I2S data format, required clocking, allowed source rates, output filters, and load impedance against the manufacturer datasheet. Exposed-pad copper and enclosure airflow remain important because the integrated output stage dissipates power locally.
推荐
Smart Display Audio
The STA381BWSTR can support smart-display speakers where an embedded host receives digital audio and needs local amplification without a large analog board. Its 48-VQFN package is useful when display electronics leave limited PCB area, and the 2.1-channel architecture can serve stereo speakers plus a low-frequency driver. I2C configuration allows the display controller to adjust device behavior alongside other system functions. The analog input provides a path for analog media sources, while embedded protection helps manage abnormal conditions. Layout must keep the digital audio and I2C return paths separated from output-current loops, and the exposed pad needs a carefully constructed thermal path. Use the manufacturer reference layout for all high-current connections.
推荐
Portable Entertainment Speaker
A portable entertainment speaker can use the STA381BWSTR when its input source is digital and board area is constrained. The device's integrated 2.1-channel processing and amplification reduce the component count around the audio path, while I2C enables configuration from a Bluetooth or application processor. The 4.5 V lower operating limit must be checked against battery-derived rail behavior, including transients and undervoltage conditions. Embedded undervoltage, overcurrent, thermal, and short-circuit protection provides useful baseline safeguards. A soundbar-style or portable design should also account for output-filter selection, stable supply decoupling, exposed-pad heat spreading, and the acoustic constraints imposed by a small enclosure. The 1 Vrms analog input can cover wired fallback sources.
推荐
Digital Audio Source Monitor
The STA381BWSTR can be evaluated for a digital audio monitor that needs controlled local playback from an I2S source. The I2S interface supports a stated 32 kHz sampling rate, and the 1 Vrms stereo analog input offers a second source path for comparison or fallback. I2C configuration with selectable addressing allows the monitor controller to manage the audio IC without tying it to a fixed address. Because this is an integrated output device rather than a conventional codec, the monitor's amplifier, load, filtering, and grounding arrangement must follow the manufacturer reference design. Embedded protection is valuable in unattended equipment, while the exposed VQFN pad requires adequate copper for reliable thermal behavior.
推荐
推荐产品汇总
工程参考数据: STA381BWSTR ——对比、设计指导和合规信息。
选型指南
设计说明
Treat the exposed VQFN pad as the primary thermal path for the integrated output stage. Follow the manufacturer land-pattern dimensions and place a continuous ground-connected copper area beneath the package where the datasheet permits. Keep surrounding copper and components from obstructing heat flow, and use the package thermal information for enclosure and ambient calculations. Do not infer permissible output power from the 25.5 V operating supply alone.
Place input and output network components close to their associated pins, and keep the I2S, I2C, and analog input routing away from output-current return paths. Provide local supply bypassing at the device pins using the capacitance and placement specified by the manufacturer application circuit. The exposed pad and thermal vias must follow the documented pattern; changing via placement or pad segmentation can affect electrical and thermal performance.
Do not treat the 27 V absolute maximum supply rating as the operating target. The specified operating range is 4.5 V to 25.5 V, so transient suppression, supply sequencing, and rail tolerance must be designed into the parent system. Also verify the supported I2S format, sampling configuration, output-filter values, speaker impedance, and channel mapping against the manufacturer datasheet before releasing a PCB.
Separate the sensitive analog input and digital control interfaces from power-stage currents and switching nodes. Use a continuous ground reference, minimize loop area around the analog input, and route I2C and I2S clock and data lines away from the audio output network. Keep the I2C pull-up arrangement within the electrical limits of the datasheet and use the selectable address feature to avoid conflicts in multi-device systems.
合规信息
The product listing identifies the device as lead free. RoHS, REACH, halogen-free, and conflict-minerals status were not explicitly stated.