STMicroelectronics

STA381BWSTR - 2.1-Channel Digital Audio | STMicroelectronics

Teilenummer: STA381BWSTR ✓ Aktiv
4.5 V to 25.5 V Vdss Embedded Id 48-VQFN, 7 x 7 mm Package
MOQ: 1 |

STA381BWSTR Übersicht

STMicroelectronics STA381BWSTR is a 2.1-channel, fully integrated digital audio system with a 48-VQFN 7 x 7 mm surface-mount package. It combines a 4.5 V to 25.5 V operating supply range, selectable I2C control, 1 Vrms stereo analog input, and an I2S interface supporting a 32 kHz sampling rate. The device is designed to simplify compact active-speaker, soundbar, multimedia, and digital-active-loudspeaker designs where local amplification, volume control, and source selection are required.

A digital audio processor is an application-specific integrated circuit that accepts digital or analog audio, performs control and signal-path functions, and drives an audio output stage. Within the broader semiconductor hierarchy, the STA381BWSTR belongs to the amplifier IC and audio processor category. It is a system-oriented alternative to combining a digital audio decoder, preamplifier, volume-control circuit, and conventional power amplifier in a larger design.

The principal features include embedded short-circuit, thermal, overcurrent, and undervoltage protection. The operating supply range reaches 25.5 V, while the absolute maximum supply rating is 27 V. I2C control with a selectable device address supports configuration and register access by a host controller. The 1 Vrms stereo analog input gives an external source interface, while the I2S interface provides a digital audio path at up to the stated 32 kHz sampling rate.

The STA381BWSTR integrates processing and amplification functions into one device, reducing the number of external blocks required for a typical 2.1-channel output stage. Its 48-VQFN package also consolidates the footprint into a 7 x 7 mm land pattern, but its exposed thermal pad requires careful PCB heat spreading. Protection functions improve robustness by limiting damage from abnormal output conditions, although the final design must still provide suitable passive components, speaker loads, and thermal paths.

Typical uses include compact multimedia speakers, active soundbars, portable entertainment systems, smart displays, and other consumer audio products. A host processor can use I2C to set operating parameters, while an I2S source supplies digital audio. Alternatively, the stereo analog input can accept a line-level signal from another audio source. These configurations make the device useful when designers need local channel amplification without implementing a discrete power-amplifier board.

The primary design consideration is power management. Because the device combines amplification and processing, its exposed-pad layout, output-filter components, supply decoupling, and grounding directly affect stability, thermal performance, and audio behavior. Use the manufacturer datasheet for the exact pin assignment, recommended application circuit, output configuration, and acoustic or electrical performance limits before releasing a PCB.

Drop-in-Alternativen für STA381BWSTR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

STA381BWSTR Grenzwerte & elektrische Eigenschaften

Product Type Fully integrated 2.1-channel digital audio processor
Channel Configuration 2.1 channels
Supply Voltage Operating Range 4.5 V to 25.5 V
Absolute Maximum Supply Voltage 27 V
Analog Audio Input 1 Vrms stereo
Digital Audio Interface I2S
I2S Sampling Rate 32 kHz
Control Interface I2C with selectable device address
Short-Circuit Protection Output-to-GND, output-to-VCC, and output-to-output
Thermal Protection Embedded
Überstromschutz Embedded
Undervoltage Protection Embedded
Gehäuse 48-VQFN, 7 x 7 mm
Package Type Exposed-pad VQFN
Montageart Surface mount
Packaging Tape and reel
Lead-Free Status Lead free

STA381BWSTR exposed-pad vqfn Pinbelegungsleitfaden

Pinbelegung für STA381BWSTR (exposed-pad vqfn-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für STA381BWSTR im exposed-pad vqfn-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für STA381BWSTR.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

STA381BWSTR ist geeignet für 6 Anwendungs: Compact Active Multimedia Speaker, 2.1-Channel Soundbar, Digital Active Loudspeaker, Smart Display Audio, Portable Entertainment Speaker, Digital Audio Source Monitor.

🔊

Compact Active Multimedia Speaker

The STA381BWSTR fits a compact active multimedia speaker that requires digital source support, local volume control, and two-channel amplification in a small board area. The 48-VQFN 7 x 7 mm package leaves more room for connectors and passive components than a discrete decoder-plus-amplifier design. Its 4.5 V to 25.5 V operating supply supports a broad range of powered speaker architectures, while I2C lets a host configure volume and operating parameters. The 1 Vrms stereo analog input also permits fallback from a line-level source. Final output-network values, speaker impedance, and thermal performance must be selected from the manufacturer application circuit and electrical limits.

📺

2.1-Channel Soundbar

The STA381BWSTR is suited to a 2.1-channel soundbar in which left and right channels and a subwoofer are managed from one compact audio IC. Its integrated digital audio system simplifies signal routing, while the I2S interface accepts digital program audio and I2C provides host control. The 4.5 V to 25.5 V supply range is useful in powered enclosures using higher-voltage rails. Embedded short-circuit, thermal, overcurrent, and undervoltage protection improves resilience, but the designer must still validate channel limits, crossover or filter arrangements, speaker loading, and the thermal path from the exposed VQFN pad. The 1 Vrms analog input supports legacy sources if required.

🔊

Digital Active Loudspeaker

A digital active loudspeaker can use the STA381BWSTR to combine an I2S audio stream, local processing, and a 2.1-channel output stage in a space-constrained driver enclosure. The interface supports a stated 32 kHz sampling rate, making it relevant for designs centered on speech, compact entertainment audio, or synchronized playback. Selectable-address I2C control permits configuration from the speaker's main controller and can assist multi-speaker systems. Before production, verify the supported I2S data format, required clocking, allowed source rates, output filters, and load impedance against the manufacturer datasheet. Exposed-pad copper and enclosure airflow remain important because the integrated output stage dissipates power locally.

🖥️

Smart Display Audio

The STA381BWSTR can support smart-display speakers where an embedded host receives digital audio and needs local amplification without a large analog board. Its 48-VQFN package is useful when display electronics leave limited PCB area, and the 2.1-channel architecture can serve stereo speakers plus a low-frequency driver. I2C configuration allows the display controller to adjust device behavior alongside other system functions. The analog input provides a path for analog media sources, while embedded protection helps manage abnormal conditions. Layout must keep the digital audio and I2C return paths separated from output-current loops, and the exposed pad needs a carefully constructed thermal path. Use the manufacturer reference layout for all high-current connections.

📱

Portable Entertainment Speaker

A portable entertainment speaker can use the STA381BWSTR when its input source is digital and board area is constrained. The device's integrated 2.1-channel processing and amplification reduce the component count around the audio path, while I2C enables configuration from a Bluetooth or application processor. The 4.5 V lower operating limit must be checked against battery-derived rail behavior, including transients and undervoltage conditions. Embedded undervoltage, overcurrent, thermal, and short-circuit protection provides useful baseline safeguards. A soundbar-style or portable design should also account for output-filter selection, stable supply decoupling, exposed-pad heat spreading, and the acoustic constraints imposed by a small enclosure. The 1 Vrms analog input can cover wired fallback sources.

🎧

Digital Audio Source Monitor

The STA381BWSTR can be evaluated for a digital audio monitor that needs controlled local playback from an I2S source. The I2S interface supports a stated 32 kHz sampling rate, and the 1 Vrms stereo analog input offers a second source path for comparison or fallback. I2C configuration with selectable addressing allows the monitor controller to manage the audio IC without tying it to a fixed address. Because this is an integrated output device rather than a conventional codec, the monitor's amplifier, load, filtering, and grounding arrangement must follow the manufacturer reference design. Embedded protection is valuable in unattended equipment, while the exposed VQFN pad requires adequate copper for reliable thermal behavior.

What is the STA381BWSTR?
The STA381BWSTR is a fully integrated 2.1-channel digital audio system from STMicroelectronics. It combines digital audio processing, amplification, I2C configuration, an I2S interface, and 1 Vrms stereo analog input in a 48-VQFN 7 x 7 mm package. According to the manufacturer datasheet, its operating supply range is 4.5 V to 25.5 V, making it appropriate for compact active-speaker and multimedia audio products.
What are the key specifications of STA381BWSTR that engineers should know?
The STA381BWSTR supports a 4.5 V to 25.5 V operating supply, a 27 V absolute maximum supply rating, 1 Vrms stereo analog input, and an I2S digital interface operating at a stated 32 kHz sampling rate. It also provides selectable-address I2C control and embedded short-circuit, thermal, overcurrent, and undervoltage protection. The manufacturer datasheet identifies the package as a 48-VQFN with an exposed pad and a 7 x 7 mm body.
Where can I download the STA381BWSTR datasheet PDF?
The STA381BWSTR datasheet PDF is available through the product documentation links on this page. The linked document describes the 2.1-channel Sound Terminal architecture, electrical specifications, pin functions, protection behavior, and application information. For released designs, use the manufacturer datasheet and its pin-description table to assign every PCB net and confirm component values against the latest document revision.
Where can I find the STA381BWSTR pinout?
The STA381BWSTR uses a 48-VQFN package, but a verified numbered pin list is not published on this product page. Use the pin-description table and package drawing in the manufacturer datasheet to map VQFN pin numbers, exposed-pad connections, ground returns, and output nodes. The exposed pad must be handled according to the recommended PCB land pattern and thermal design rather than inferred from a generic 48-pin diagram.
What supply voltage does the STA381BWSTR require?
The STA381BWSTR operates from 4.5 V to 25.5 V, and its absolute maximum supply rating is 27 V. According to the manufacturer datasheet, this range allows the device to be used in higher-voltage consumer audio systems while retaining protection against undervoltage and overcurrent conditions. The system designer must also maintain adequate voltage headroom for the configured audio output and comply with the recommended decoupling arrangement.
Which audio inputs does the STA381BWSTR support?
The STA381BWSTR supports both a 1 Vrms stereo analog input and an I2S digital audio interface. The manufacturer datasheet states that the I2S interface supports a 32 kHz sampling rate. An I2S source suits digital product architectures, while the analog input permits connection to a line-level source when digital source integration is unnecessary. Signal amplitude and interface details should follow the datasheet application circuit.
How is the STA381BWSTR configured?
The STA381BWSTR is configured through an I2C control interface with a selectable device address. The host controller can use this interface to access the device registers and select operating behavior. The manufacturer datasheet provides the register map, electrical requirements, and addressing information. Firmware should include explicit address detection, timeout handling, and validation of write results to avoid programming an unintended device on a multi-board bus.
What protection features are built into the STA381BWSTR?
The STA381BWSTR includes manufacturing short-circuit protection for output-to-GND, output-to-VCC, and output-to-output conditions, plus thermal, overcurrent, and undervoltage protection. These protections improve fault tolerance in a compact audio product, but they do not remove the need for correct speaker wiring, filtering, supply stability, and thermal management. Apply the protection and output-limit guidance from the manufacturer datasheet to the final amplifier network.
Can the STA381BWSTR be used in a compact active speaker?
Yes, the STA381BWSTR is well suited to a compact active speaker because it integrates a 2.1-channel audio system, I2S input, analog input, control, and output-stage functions. Its 48-VQFN 7 x 7 mm package helps limit board area, while embedded protection improves robustness. The final design still needs the recommended output network, supply bypassing, speaker loads, and an exposed-pad thermal path.
Is STA381BWSTR suitable for a soundbar design?
The STA381BWSTR is suitable for a compact soundbar or multimedia speaker when its 2.1-channel architecture matches the required left, right, and subwoofer outputs. Its operating supply reaches 25.5 V, I2S supports digital source integration, and I2C permits host-controlled configuration. Designers must verify output power, filter requirements, channel mapping, thermal performance, and subwoofer load limits against the manufacturer specifications.
When should I choose the STA381BWSTR over a discrete amplifier design?
Choose the STA381BWSTR when a compact product benefits from combining digital audio input, control, signal processing, and a 2.1-channel output system in one IC. It can reduce board area and assembly complexity compared with separate decoder, preamplifier, volume-control, and amplifier blocks. Retain a discrete design when the product requires channel counts, power levels, thermal performance, or protection behavior outside the STA381BWSTR specification.
What is the best drop-in replacement for the STA381BWSTR?
No verified, pin-compatible drop-in replacement for the STA381BWSTR was identified. The cross-reference search found STA381BWTR, but it is a reel-ordering variant of the same device rather than an electrically distinct substitute and is not counted as an engineering alternative. A valid replacement must use the same 48-VQFN footprint, preserve pin functions, and match supply, interface, protection, and audio-output requirements; confirm all of these against the manufacturer datasheet.
Can STA381BWTR replace the STA381BWSTR?
STA381BWTR and STA381BWSTR are listed as 2.1-channel, 48-VQFN audio-system devices, suggesting the same device family and electrical function. Their ordering suffix indicates a different reel presentation rather than a confirmed functional or lifecycle change. Nevertheless, STMicroelectronics is not identified as guaranteeing a drop-in replacement across suffix codes, so verify the ordering information, pinout, grade, and marking requirements before substitution.
Is there an STMicroelectronics equivalent for the STA381BWSTR?
No separate STMicroelectronics drop-in equivalent was verified for the STA381BWSTR beyond its same-family ordering variants. The available cross-reference material does not establish a distinct pin-compatible MPN with different electrical ratings or features. For an equivalent design, compare the complete signal path, supply limits, I2C register behavior, I2S format, protection features, exposed-pad layout, and output-stage requirements rather than relying only on package similarity.
Where can I buy the STA381BWSTR and what is its price?
Use the Request a Quote form on this page to ask about STA381BWSTR availability, current pricing, minimum order quantity, and lead time. The product listing identifies the exact 48-VQFN ordering code as a surface-mount, tape-and-reel part, but a verifiable quantity-break table for this exact MPN is not available. The quote team can confirm factory packaging, current allocation, and shipment timing.
Is the STA381BWSTR in stock, and what is its lead time?
Current factory stock and lead time should be confirmed through the Request a Quote form on this page. The device is offered in tape-and-reel packaging for surface-mount assembly, and distributor search results indicate product availability, but they do not establish a transferable stock commitment for the requested quantity. Include your forecast quantity and target date so the supplier can confirm supply and production scheduling.

Technische Referenzdaten für STA381BWSTR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the STA381BWSTR when a compact audio product needs a combined 2.1-channel digital audio system with I2S input, selectable-address I2C control, analog-input flexibility, and embedded protection. The 48-VQFN 7 x 7 mm package can simplify a design that otherwise needs separate audio processing and amplifier blocks, while the 4.5 V to 25.5 V operating range supports higher-voltage powered products. It is less suitable when the design requires more than 2.1 channels, unsupported sample rates or I2S formats, loads outside the datasheet limits, or a different package footprint. No distinct drop-in alternative was verified. STA381BWTR appears in cross-reference material as the same 48-VQFN family, but it is a reel-ordering variant rather than a meaningful engineering substitute. Before selecting any alternative, compare the complete pin map, exposed-pad connection, supply range, register behavior, protection features, output network, and thermal limits.

Designhinweise

Treat the exposed VQFN pad as the primary thermal path for the integrated output stage. Follow the manufacturer land-pattern dimensions and place a continuous ground-connected copper area beneath the package where the datasheet permits. Keep surrounding copper and components from obstructing heat flow, and use the package thermal information for enclosure and ambient calculations. Do not infer permissible output power from the 25.5 V operating supply alone.

Place input and output network components close to their associated pins, and keep the I2S, I2C, and analog input routing away from output-current return paths. Provide local supply bypassing at the device pins using the capacitance and placement specified by the manufacturer application circuit. The exposed pad and thermal vias must follow the documented pattern; changing via placement or pad segmentation can affect electrical and thermal performance.

Do not treat the 27 V absolute maximum supply rating as the operating target. The specified operating range is 4.5 V to 25.5 V, so transient suppression, supply sequencing, and rail tolerance must be designed into the parent system. Also verify the supported I2S format, sampling configuration, output-filter values, speaker impedance, and channel mapping against the manufacturer datasheet before releasing a PCB.

Separate the sensitive analog input and digital control interfaces from power-stage currents and switching nodes. Use a continuous ground reference, minimize loop area around the analog input, and route I2C and I2S clock and data lines away from the audio output network. Keep the I2C pull-up arrangement within the electrical limits of the datasheet and use the selectable address feature to avoid conflicts in multi-device systems.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Yes
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The product listing identifies the device as lead free. RoHS, REACH, halogen-free, and conflict-minerals status were not explicitly stated.

Daten verifiziert am: 2026-11-05 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

STA381BWSTR datasheet STA381BWSTR specifications STA381BWSTR pinout STA381BWSTR datasheet pdf STA381BWSTR application circuit STA381BWSTR equivalent STA381BWSTR replacement STA381BWSTR cross reference STA381BWSTR 48 VQFN STA381BWSTR 2.1 channel STA381BWSTR I2S STMicroelectronics STA381BWSTR STA381BWSTR price STA381BWSTR stock STA381BWSTR soundbar

Verwandte Bauteile & Begriffe

STMicroelectronics STA381BWSTR STA381BWTR STA321MPLTR 2.1-channel audio system fully integrated digital audio processor digital audio processor audio amplifier IC application-specific integrated circuit semiconductor I2S interface I2C control interface selectable device address 1 Vrms stereo analog input 32 kHz sampling rate 4.5 V to 25.5 V operating supply 27 V absolute maximum rating 48-VQFN VQFN family exposed pad surface-mount package short-circuit protection thermal protection overcurrent protection undervoltage protection lead-free active speaker soundbar digital active loudspeaker
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen