STM32H755IIT6 - 480MHz Dual-Core MCU | STMicroelectronics
料号: STM32H755IIT6 ✓ 量产中STM32H755IIT6 概述
An STM32H7-series microcontroller is an embedded 32-bit Arm Cortex-M processor designed for industrial control, communications equipment, audio and digital signal processing, graphics, and high-complexity embedded systems. The STM32H755 architecture places a high-speed Cortex-M7 core and a Cortex-M4 core in one device, allowing firmware-intensive tasks to run concurrently with real-time control, communications, or signal-processing workloads.
The STM32H755IIT6 provides 2 MB of flash for program storage and 1 MB of RAM for working memory. Its 46 communication and analog interfaces support a broad range of embedded connections, while its integrated SMPS and cryptographic capabilities reduce the need for additional support circuitry in suitable designs. The device supports 1.8 V, 2.5 V, and 3.3 V operating configurations according to the product listing.
Dual-core operation is the principal architectural advantage. The 480 MHz Cortex-M7 core can handle demanding control loops, display processing, communications, or DSP workloads, while the 240 MHz Cortex-M4 core can execute independent real-time tasks. Software can use inter-core mechanisms supported by the STM32H7 platform to divide processing loads and reduce synchronization overhead compared with a single-core implementation.
Typical applications include industrial automation and factory control, high-performance networking equipment, medical monitoring systems, motor and power-control platforms, professional audio equipment, and connected embedded products. The 176-LQFP package exposes substantially more I/O than small-package MCUs while remaining compatible with conventional leaded-board assembly processes.
Board design should account for the STM32H7 family's demanding power, clocking, decoupling, and signal-integrity requirements. Follow the manufacturer datasheet's pin, voltage, decoupling, and external-component recommendations, and use ST's device configuration and pin-compatibility tools before changing an MCU on an existing PCB.
This product summary consolidates the verified core, memory, package, interface, and sourcing information with practical application guidance and same-package STM32H7 replacement candidates. It also identifies which replacement claims require final pin, peripheral, firmware, and qualification review before production use.
直接替换替代料: STM32H755IIT6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM32H755IIT6 (相同外形与封装尺寸) ——差异在于 Package, Communication Interfaces, Core Architecture, Flash Memory, ADC.
STM32H753IIT6
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →STM32H743IIT6
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →STM32H750IIT6
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM32H745IIT6
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →STM32H730IIT6
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM32H755IIT6 最大额定值与电气特性
| Product Type | Dual-core 32-bit Arm Cortex-M7/M4 microcontroller |
| Cortex-M7 Maximum Frequency | 480 MHz |
| Cortex-M4 Maximum Frequency | 240 MHz |
| Flash Memory | 2 MB |
| RAM Memory | 1 MB |
| 封装 | 176-pin LQFP, 24 x 24 mm |
| 安装类型 | Surface mount |
| Core Architecture | Arm Cortex-M7 and Arm Cortex-M4 |
| Communication and Analog Interfaces | 46 interfaces |
| Internal Switching Power Supply | Integrated SMPS |
| Cryptographic Hardware | Integrated cryptographic capability |
| Supported Supply Configurations | 1.8 V, 2.5 V, and 3.3 V |
| Architecture | 32-bit RISC |
| Programming Memory Organization | 2M x 8 bits |
STM32H755IIT6 176-pin lqfp, 24 x 24 mm 引脚配置指南
STM32H755IIT6(176-pin lqfp, 24 x 24 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM32H755IIT6.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32H755IIT6 适用于 6 应用s: Industrial Automation and Factory Control, High-Performance Networking Equipment, Medical Monitoring and Diagnostic Equipment, Professional Audio and DSP Equipment, Motor Drive and Power-Control Platforms, Connected Embedded and IoT Products.
Industrial Automation and Factory Control
The STM32H755IIT6 fits industrial controllers that must combine fast motion control with supervisory communications. Its 480 MHz Cortex-M7 core can process complex control algorithms, while the 240 MHz Cortex-M4 core can handle real-time tasks such as encoder servicing, communication servicing, or safety monitoring. The 1 MB RAM provides space for control buffers and diagnostics, while 46 communication and analog interfaces simplify peripheral integration. For an industrial design, verify the exact temperature grade, isolation requirements, analog accuracy, and functional-safety obligations before production release.
推荐
High-Performance Networking Equipment
The STM32H755IIT6 is suitable for network appliances, gateways, and protocol-conversion equipment that need substantial real-time processing without a separate high-performance MCU. The 480 MHz Cortex-M7 core can handle packet processing or control-plane workloads, while the Cortex-M4 core can manage service tasks and time-sensitive interfaces. Its 2 MB flash supports a larger embedded application, and 1 MB RAM supports protocol buffers. The exact Ethernet or other high-speed interface configuration must be checked against the manufacturer datasheet, including supported clocks, PHY requirements, and package-level signal assignment.
推荐
Medical Monitoring and Diagnostic Equipment
The STM32H755IIT6 can support connected medical monitoring equipment where signal processing, display management, communications, and real-time sampling must coexist. The Cortex-M7 core provides processing headroom for digital filtering and control, while the Cortex-M4 core can isolate sampling or communication work. The device's 1 MB RAM is useful for buffering, and its broad interface count can reduce external glue. Medical designs still require validated analog front ends, isolation as appropriate, risk-management controls, and verification of the exact electrical and qualification requirements for the intended medical equipment.
推荐
Professional Audio and DSP Equipment
The STM32H755IIT6 is appropriate for professional audio controllers, digital mixers, and DSP-based signal-processing equipment where deterministic computation and responsive control are valuable. The 480 MHz Cortex-M7 core can execute filters and effects processing, while the 240 MHz Cortex-M4 core can handle device control, parameter updates, or peripheral tasks. With 1 MB RAM, the MCU can maintain larger sample and control buffers, while 2 MB flash accommodates firmware and assets. Audio designs should account for the STM32H7 cache behavior, memory latency, audio-clock architecture, and analog or digital codec interface requirements.
推荐
Motor Drive and Power-Control Platforms
The STM32H755IIT6 fits sophisticated motor-drive and power-control platforms that need real-time sampling alongside higher-level control. The Cortex-M4 core can service deterministic timing tasks, while the Cortex-M7 core handles complex algorithms, diagnostics, and supervisory logic. The 46 communication and analog interfaces provide a broad basis for encoders, current sensing, communications, and protection signaling. The integrated SMPS can assist suitable power architectures, but designers must still validate its operating region, external component requirements, thermal conditions, and isolation strategy for the target power stage.
推荐
Connected Embedded and IoT Products
The STM32H755IIT6 can serve as the central controller in a connected embedded product that combines a user interface, communications, local processing, and real-time I/O. The Cortex-M7 core can run higher-level application logic and graphical workloads, while the Cortex-M4 core manages responsive peripheral tasks. Its 2 MB flash and 1 MB RAM support a larger firmware footprint than many compact MCUs, and the broad interface selection simplifies connection to sensors and transceivers. Choose a suitable network transceiver, validate protocol stack timing, and confirm the complete pin and power configuration for the final product enclosure.
推荐
推荐产品汇总
工程参考数据: STM32H755IIT6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32H753IIT6 | STM32H743IIT6 | STM32H750IIT6 | STM32H745IIT6 | STM32H730IIT6 |
|---|---|---|---|---|---|---|
| Package | LQFP-176 (24 x 24 mm) | LQFP-176 (24 x 24 mm) | LQFP-176 (24 x 24 mm) | LQFP-176 (24 x 24 mm) | LQFP-176 (24 x 24 mm) | LQFP-176 (24 x 24 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
关键差异点
- Adds a dedicated second real-time core (对比 STM32H743IIT6)
- Preserves a 480 MHz primary processing path (对比 STM32H730IIT6)
- Provides dedicated Cortex-M4 real-time capacity (对比 STM32H750IIT6)
- Combines high-performance and real-time cores (对比 STM32H745IIT6)
设计说明
Implement the power tree exactly as shown in the STM32H755xI manufacturer datasheet, including the required internal-regulator or SMPS configuration, supply sequencing, and decoupling. The H7 family's 480 MHz Cortex-M7 core can create significant transient current demand, so place high-frequency ceramic decoupling and bulk energy storage close to the device. Confirm the minimum operating voltage at each power state and avoid assuming that every H7 variant supports the same SMPS and core-supply configuration.
Preserve the package's complete 176-pin assignment and follow the manufacturer footprint and land-pattern guidance. Keep clock inputs, decoupling connections, reset circuitry, debug signals, and high-speed interfaces away from noisy switching nodes. Because a leaded LQFP also exposes many pins, assign a unique net label to every used and unused signal in the schematic and run ERC and pin-conflict checks before releasing the layout.
Do not treat another STM32H7 MPN as an automatic drop-in replacement merely because it uses LQFP-176. Compare the pin table, alternate-function multiplexing, power pins, clock tree, boot configuration, debug interface, security features, and peripheral inventory. Also confirm whether application firmware depends on the STM32H755's separate Cortex-M4 core. ST's STM32CubeMX pin-compatible MCU list and the manufacturer migration documentation are the appropriate tools for this review.
Design the clock and high-speed interface paths for deterministic behavior rather than nominal connectivity. Match trace lengths where the MCU and companion devices require it, provide continuous reference planes, avoid stubs, and place termination components at the correct device ends. For external memory, serial links, or Ethernet interfaces, follow the manufacturer layout guidance and validate signal margins with the intended development hardware before volume production.
合规信息
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact MPN in the supplied product information. Confirm the current declarations on the STMicroelectronics product page before release to regulated markets.