STMicroelectronics

STM32L051K6U6 - 32MHz Cortex-M0+ MCU | STMicroelectronics

料号: STM32L051K6U6 ✓ 量产中
32-UFQFPN, 5 x 5 mm Package 32 MHz Speed 32 KB (32K x 8) Memory
最小起订量: 1 |

STM32L051K6U6 概述

The STMicroelectronics STM32L051K6U6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M0+ processor operating at 32 MHz, 32 KB of Flash memory, and a 32-pin UFQFPN package measuring 5 x 5 mm. It is positioned for compact embedded systems requiring efficient control, communications, analog measurement, and low standby power.

An ultra-low-power microcontroller is a semiconductor designed to complete control tasks while minimizing active and idle energy consumption. The STM32L0 family belongs to the 32-bit Arm Cortex-M microcontroller hierarchy and combines general-purpose processing, embedded memory, serial interfaces, timing peripherals, and analog conversion in one device. This integration reduces board area in battery-powered instruments, compact sensors, industrial controls, and accessory nodes.

The STM32L051K6U6 provides 32 KB of Flash for firmware, 8 KB of SRAM for working memory, and 2 KB of EEPROM for nonvolatile data retention. Its feature set includes ADC capability, I2C, SPI, UART, and PWM functions. The Arm Cortex-M0+ core executes 32-bit instructions at up to 32 MHz, supporting responsive digital control while retaining the efficiency expected from an ultra-low-power embedded platform.

The part is identified as a 32-UFQFPN surface-mount device in a 5 x 5 mm outline. Its compact land pattern is useful for space-constrained products, although the exposed-area thermal and assembly requirements must be followed in the PCB footprint and production process. The operating-temperature range listed for this ordering code extends from -40 C to 85 C, supporting industrial and commercial equipment where that range is adequate.

Typical applications include low-power sensor nodes, compact industrial controllers, battery-operated instruments, communication modules, and small motor or actuator-control products. The UART and SPI interfaces support external radios and storage, I2C supports low-speed sensors and peripherals, and the ADC supports analog monitoring. Firmware can use these interfaces together with PWM outputs and low-power modes to balance responsiveness against average energy use.

Designers should begin with the manufacturer pin-description table and package drawing before assigning tracks or defining the exposed-pad connection. Confirm the operating-voltage limits, decoupling requirements, clock configuration, programming interface, and unused-pin treatment in the manufacturer datasheet. Firmware migration to another STM32L0 member should be checked for peripheral differences even when the package and core are shared.

This product page combines the exact ordering information, interface features, pin-package characteristics, practical application guidance, and same-family drop-in alternatives for STM32L051K6U6 evaluation. It is designed to shorten component selection while preserving the electrical, mechanical, and firmware checks required for a reliable embedded design.

直接替换替代料: STM32L051K6U6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: STM32L051K6U6 (相同外形与封装尺寸) ——差异在于 Flash Memory, Package, Product Type.

STMicroelectronics
Flash Memory: 32 KB
Package: 32-UFQFPN
Product Type: 32-bit ultra-low-power microcontroller
对比 STM32L051K6U6 →

STM32L051K8U6

✅ 直接替换 ⚠️ 规格未核验
📦 32-UFQFPN (5x5)
Flash increases from 32 KB to 64 KB (+100%); CPU frequency remains 32 MHz and the 32-pin package remains compatible.

📋 参考替代料(不在目录中)

STM32L031K6U6

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 32-UFQFPN (5x5)
32-bit ultra-low-power microcontroller · Arm Cortex-M0+ · 32-bit RISC · 32 MHz · 32 KB · 32K x 8 bits · 32-UFQFPN · 5 x 5 mm

联系询价

查看数据手册 →

STM32L021K6U6

✅ 直接替换 ⚠️ 规格未核验
📦 32-UFQFPN (5x5)
Flash remains 32 KB and CPU frequency remains 32 MHz; EEPROM and timer coverage are reduced relative to STM32L051K6U6.

📋 参考替代料(不在目录中)

STM32L041K6U6

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 32-UFQFPN (5x5)
32-bit ARM Cortex-M0+ microcontroller · Arm Cortex-M0+ 32-bit RISC · 32 MHz · 32 KB (32K x 8 bits) · 27 I/O · 32-pin UFQFPN · 5 mm x 5 mm

联系询价

查看数据手册 →

STM32L071K6U6

✅ 直接替换 ⚠️ 规格未核验
📦 32-UFQFPN (5x5)
CPU frequency remains 32 MHz while Flash increases from 32 KB to 128 KB (+300%); additional memory is the principal parametric change.

📋 参考替代料(不在目录中)

STM32L051K6U6 最大额定值与电气特性

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M0+ RISC core
CPU Word Size 32 bit
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB (32K x 8)
SRAM 8 KB
EEPROM 2 KB
ADC 12-bit ADC
Serial Interfaces I2C, SPI, and UART
Timer Output PWM
工作温度范围 -40 C to +85 C
封装 32-UFQFPN, 5 x 5 mm
引脚数量 32 pins
安装类型 Surface mount

STM32L051K6U6 32-ufqfpn, 5 x 5 mm 引脚配置指南

STM32L051K6U6(32-ufqfpn, 5 x 5 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

STM32L051K6U6 的 32-ufqfpn, 5 x 5 mm 封装引脚图

暂无详细引脚数据: STM32L051K6U6.

请参阅 数据手册 以查看完整引脚配置。

典型应用

STM32L051K6U6 适用于 6 应用s: Battery-Powered Sensor Node, Compact Industrial Controller, Low-Power Communication Module, Battery-Powered Measurement Instrument, Small Motor and Actuator Control, Embedded Accessory and Wearable Control.

🧩

Battery-Powered Sensor Node

The STM32L051K6U6 fits battery-powered sensor nodes because its ultra-low-power STM32L0 architecture combines a 32 MHz Arm Cortex-M0+ core with 32 KB of Flash, 8 KB of SRAM, and 2 KB of EEPROM. The ADC can acquire analog sensor data while I2C supports compatible low-speed sensing devices. A firmware schedule can keep the processor inactive between measurements and use UART or SPI for short data bursts, helping reduce average energy use. The 32-pin UFQFPN package also limits board area in a compact sensor enclosure. Power-source impedance, regulator dropout, and the selected sleep mode should be evaluated together because average battery life depends on the complete duty cycle rather than CPU frequency alone.

🏭

Compact Industrial Controller

The STM32L051K6U6 is appropriate for a compact industrial controller where deterministic embedded control must coexist with limited board area. Its Cortex-M0+ core operates at 32 MHz, while PWM outputs can control actuators and the 12-bit ADC can monitor analog process inputs. I2C can connect configuration or sensor devices, SPI can support higher-speed peripherals, and UART provides a service or fieldbus link. The listed -40 C to 85 C temperature range supports many commercial and industrial environments. Firmware should define safe states for every actuator, provide watchdog recovery, and validate the 12-bit ADC accuracy against the actual signal chain and analog ground layout.

🌐

Low-Power Communication Module

The STM32L051K6U6 can serve as the host controller in a compact wireless or serial communication module. Its 32-bit Cortex-M0+ processor provides sufficient control performance for packet handling, while UART offers a straightforward host interface and SPI supports common radio transceivers and flash-storage devices. The 32 KB of embedded Flash supports a focused protocol stack, and 8 KB of SRAM can accommodate working buffers without requiring an external memory device for modest workloads. Because radio modules are often duty-cycle sensitive, firmware should disable unused peripherals and use the low-power modes documented for the STM32L051K6 family. RF certification and electromagnetic compatibility remain system-level requirements.

🖥️

Battery-Powered Measurement Instrument

The STM32L051K6U6 is well suited to compact measurement instruments that combine low standby demand with a responsive user interface. The 12-bit ADC handles analog measurement channels, UART or SPI can connect to a display or external memory, and PWM can drive indicator LEDs or excitation circuits. Its 32 KB of Flash provides enough space for focused acquisition and calibration routines, while 2 KB of EEPROM can retain configuration parameters. The 5 x 5 mm UFQFPN package helps reduce instrument size, but the exposed-area connection and thermal design must follow the package drawing. For accurate measurements, use separate analog and digital grounding strategies and calibrate gain and offset in production.

⚡

Small Motor and Actuator Control

The STM32L051K6U6 can control small motors, solenoids, valves, or other actuator loads when its PWM outputs and ADC inputs are assigned through the manufacturer alternate-function tables. The 32 MHz Cortex-M0+ core provides responsive timing for commutation, position sensing, and fault handling, while the 8 KB of SRAM supports compact control-state machines. I2C and SPI allow expansion to sensors or gate drivers, and UART simplifies commissioning with a host computer. The principal trade-off is limited output drive, so transistor or MOSFET stages should provide load current and voltage protection. Production designs should include overcurrent, open-load, and watchdog recovery behavior rather than relying on firmware alone.

📱

Embedded Accessory and Wearable Control

The STM32L051K6U6 is suitable for compact accessory controllers that need low standby consumption and a limited set of communications. A 32 MHz Cortex-M0+ core can manage button input, status LEDs, sensor polling, and configuration updates, while UART and I2C cover common external-device connections. The 32-pin UFQFPN footprint supports dense layouts, and 32 KB of Flash accommodates a small user application without an external microcontroller. For wearable or battery-operated products, firmware should keep unused GPIO and peripherals disabled between events and use a low-power wake source. Mechanical button debouncing, ESD protection, and safe behavior during battery depletion should be included in the hardware and firmware design.

What is STM32L051K6U6?
The STM32L051K6U6 is an ultra-low-power 32-bit STMicroelectronics microcontroller built around an Arm Cortex-M0+ core operating at up to 32 MHz. According to the STMicroelectronics STM32L051K6 product page, it belongs to the STM32L0 access-line family and includes 32 KB of Flash, 8 KB of SRAM, and 2 KB of EEPROM in the STM32L051K6 configuration. The device also provides ADC, I2C, SPI, UART, and PWM capabilities for compact embedded control systems.
What are the key specifications of STM32L051K6U6?
The STM32L051K6U6 combines a 32 MHz Arm Cortex-M0+ core with 32 KB of Flash, 8 KB of SRAM, 2 KB of EEPROM, and a 12-bit ADC. According to the manufacturer product page and ordering information, the device is supplied in a 32-pin UFQFPN package with a 5 x 5 mm outline. Serial connectivity includes I2C, SPI, and UART, while PWM supports motor, lighting, and proportional-control outputs. Its listed operating range is -40 C to 85 C.
Where can I download the STM32L051K6U6 datasheet PDF?
The official STM32L051K6U6 technical information is available from the STMicroelectronics STM32L051K6 product page linked on this page. That manufacturer page contains the product overview and access to the supporting technical documentation. The STM32L051K6U6 is the 32 KB Flash member of the STM32L051K6 family and uses a 32-UFQFPN package. Engineers should use the pin description and package drawing within the manufacturer documentation when finalizing the PCB footprint.
Where can I find the STM32L051K6U6 pinout?
The STM32L051K6U6 pinout is defined by the manufacturer pin-description table and package drawing for the 32-UFQFPN device. The ordering information identifies the target as a 32-pin, 5 x 5 mm UFQFPN package, but it does not assign individual signal names to all 32 positions. Use the manufacturer documentation when routing SWD programming signals, power pins, ground connections, oscillator inputs, and exposed-area treatment rather than inferring assignments from another package.
Is STM32L051K6U6 suitable for low-power battery devices?
Yes, the STM32L051K6U6 is suitable for low-power battery devices because STMicroelectronics classifies the STM32L051K6 family as an ultra-low-power MCU. Its Cortex-M0+ core runs at up to 32 MHz, while the device includes 8 KB of SRAM and 2 KB of EEPROM for compact firmware and data storage. Actual battery life depends on the selected sleep mode, peripheral activity, operating voltage, clock configuration, and application duty cycle, which must be evaluated with the manufacturer power-consumption data.
Which peripherals are integrated into STM32L051K6U6?
The STM32L051K6U6 integrates a 12-bit ADC, I2C, SPI, UART, and PWM functions in addition to its Arm Cortex-M0+ processor. The STM32L051K6 family also provides 8 KB of SRAM and 2 KB of EEPROM. These resources support analog sensing, low-speed peripheral expansion, higher-speed serial communication, and timing or motor-control functions. Exact peripheral instances, alternate-function mappings, channel counts, and electrical limits should be selected from the manufacturer pin and peripheral tables.
What is the difference between STM32L051K6U6 and STM32L051K8U6?
The primary difference is embedded Flash capacity: the STM32L051K6U6 has 32 KB of Flash, while the STM32L051K8U6 provides 64 KB, an increase of 32 KB or 100%. Both are STM32L051-series devices associated with the same 32-pin UFQFPN package family, so the STM32L051K8U6 is a same-package alternative when its larger memory size is acceptable. Final qualification still requires checking pin assignments, firmware requirements, and all electrical conditions.
When should I choose STM32L051K6U6 over STM32L031K6U6?
Choose STM32L051K6U6 when the design benefits from the fuller STM32L051 feature set, while STM32L031K6U6 is appropriate when its reduced feature set satisfies the application. Both are 32 KB Flash members of the STM32L0 line and use the same 32-pin UFQFPN footprint. Compare ADC channels, timers, serial-interface instances, low-power modes, and firmware driver requirements before replacing one with the other. The manufacturer peripheral tables are the controlling reference for feature differences.
Is STM32L051K6U6 the same as STM32F051K4U6?
No, the STM32L051K6U6 and STM32F051K4U6 are related Arm Cortex-M0+ microcontrollers but are not identical devices. The STM32L051K6U6 belongs to STMicroelectronics' ultra-low-power STM32L0 access line and provides 32 KB of Flash, while the STM32F051K4U6 belongs to a different STM32 series with different memory and peripheral characteristics. Treat the STM32F051K4U6 as a migration candidate rather than an automatic drop-in replacement and review the manufacturer documentation.
What can replace STM32L051K6U6?
The closest same-package replacement candidates are STM32L051K8U6, STM32L031K6U6, STM32L021K6U6, STM32L041K6U6, and STM32L071K6U6 because they share the STM32L0 product family and 32-pin UFQFPN footprint. The STM32L051K8U6 retains 32 MHz operation while doubling Flash from 32 KB to 64 KB. Other candidates trade memory capacity or peripheral resources, so replacement approval should include pin review, clock timing, peripheral availability, memory usage, and firmware validation.
What is the best STMicroelectronics equivalent for STM32L051K6U6?
The STM32L051K8U6 is the most direct same-brand option when additional Flash is acceptable, retaining the STM32L051 family and 32-pin UFQFPN package while increasing Flash from 32 KB to 64 KB. The STM32L031K6U6, STM32L021K6U6, STM32L041K6U6, and STM32L071K6U6 offer further same-family choices with different memory and peripheral tradeoffs. Because none is automatically interchangeable at the firmware level, select according to pin compatibility, resources, and application requirements.
Where to buy STM32L051K6U6 online?
The STM32L051K6U6 can be requested through the Request a Quote form on this page. The form lets an engineer specify quantity, target packaging, and delivery requirements without relying on a static commercial listing. The part is identified by STMicroelectronics as a 32 MHz Cortex-M0+ MCU with 32 KB of Flash in a 32-pin UFQFPN package. Current commercial confirmation, stock status, and lead time should be obtained through that form before production scheduling.
What is the price of STM32L051K6U6?
Use the Request a Quote form on this page for the current commercial price of STM32L051K6U6. The quote workflow accounts for the requested quantity and current sourcing conditions rather than presenting a static unit figure. For engineering planning, the device is a 32 MHz Cortex-M0+ MCU with 32 KB of Flash in a 32-pin UFQFPN package. The form also provides a practical route for confirming stock, packaging, and lead time before committing a BOM.
What is the lead time for STM32L051K6U6?
Request the current lead time through the Request a Quote form on this page. Lead time can depend on order quantity, package or reel configuration, inventory position, and manufacturing schedules, so it should be confirmed for the specific production plan. The STM32L051K6U6 ordering code corresponds to a 32 MHz Cortex-M0+ MCU with 32 KB of Flash and a 32-pin UFQFPN package. Include planned demand dates and quantities in the quote request.
Is STM32L051K6U6 in stock?
Current stock status for STM32L051K6U6 should be confirmed through the Request a Quote form on this page. The component is offered as a 32 MHz Arm Cortex-M0+ ultra-low-power MCU with 32 KB of Flash in a 32-pin UFQFPN package. Because availability can vary with quantity and reel configuration, request the exact quantity and packaging needed for your build. The same request can establish allocation and lead time before an order is placed.

工程参考数据: STM32L051K6U6 ——对比、设计指导和合规信息。

选型指南

Choose the STM32L051K6U6 when a compact 32-pin UFQFPN design needs the STM32L051 feature set, a 32 MHz Cortex-M0+ core, 32 KB of Flash, 8 KB of SRAM, and the 12-bit ADC without carrying excess Flash capacity. Choose STM32L051K8U6 when firmware growth makes the additional 32 KB of Flash worthwhile. Choose STM32L031K6U6 when its reduced peripheral set fully satisfies the design, and choose STM32L041K6U6 when its clock implementation is preferred. The STM32L021K6U6 is appropriate where reduced EEPROM and timer resources are acceptable, while STM32L071K6U6 is better for firmware-heavy applications. For every alternative, confirm pin assignments, peripheral instances, clock settings, bootloader behavior, memory usage, and firmware compatibility before treating the substitution as production-ready.

与替代料对比

参数 本产品 STM32L051K8U6 STM32L031K6U6 STM32L021K6U6 STM32L041K6U6 STM32L071K6U6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 32-UFQFPN (5x5) 32-UFQFPN (5x5) 32-UFQFPN (5x5) 32-UFQFPN (5x5) 32-UFQFPN (5x5) 32-UFQFPN (5x5)
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 64 KB 32 KB 32 KB 32 KB 128 KB
SRAM 8 KB 8 KB 8 KB 8 KB 8 KB 8 KB
ADC 12-bit ADC 12-bit ADC 12-bit ADC 12-bit ADC 12-bit ADC 12-bit ADC
Serial Interfaces I2C, SPI, and UART I2C, SPI, and UART I2C, SPI, and UART I2C, SPI, and UART I2C, SPI, and UART I2C, SPI, and UART
Operating Temperature Range -40 C to +85 C -40 C to +85 C -40 C to +85 C -40 C to +85 C -40 C to +85 C -40 C to +85 C
Pin Count 32 pins 32 pins 32 pins 32 pins 32 pins 32 pins

关键差异点

  • Provides a balanced 32 KB Flash configuration without reducing CPU frequency (对比 STM32L071K6U6)
  • Uses the full STM32L051 feature set rather than the reduced STM32L031 configuration (对比 STM32L031K6U6)
  • Retains 32 KB of Flash while offering a larger-program-memory alternative (对比 STM32L051K8U6)
  • Maintains the STM32L0 Cortex-M0+ architecture and compact package family (对比 STM32F051K4U6)

设计说明

Route the exposed area of the 32-UFQFPN package using the manufacturer land-pattern and thermal-pad guidance. Place the MCU close to the intended power entry point, preserve short return paths for ground pins, and avoid separating the exposed area from the primary ground plane with unnecessary slots. Confirm drill, solder-mask, paste, and assembly dimensions against the current package drawing rather than adapting a generic QFN footprint.

Plan the power tree so the MCU supply remains within the manufacturer operating range during startup, sleep transitions, and maximum peripheral activity. Place local decoupling directly at the supply and ground pins, with the capacitor placement and values selected from the manufacturer application guidance. For battery-powered systems, calculate average current from active current, sleep current, wake duration, and measurement interval rather than using CPU frequency alone.

Separate analog inputs from fast-switching digital nets, keep the ADC return path within the quiet analog-ground region, and avoid routing high-current outputs beneath the MCU or ADC inputs. Provide short, symmetrical connections where timing or communication interfaces require controlled impedance. Since the individual pin assignments are defined in the manufacturer pin table, verify every alternate-function route and programming signal before releasing the layout.

Do not assume that another STM32L0 device with the same UFQFPN outline is firmware-compatible without checking peripheral instances, clock topology, interrupts, bootloader behavior, and memory organization. The STM32L031K6U6, STM32L021K6U6, STM32L041K6U6, and STM32L071K6U6 differ from the STM32L051K6U6 in resource availability even when the physical footprint is shared. Run peripheral characterization and full firmware regression after any substitution.

For SPI, UART, or other externally exposed interfaces, control edge rates through the source configuration and use appropriate termination when the board trace, cable, or connector creates a reflective path. Keep clock lines short and isolate them from sensitive ADC inputs. Validate the final design with the intended baud rate, cable length, supply range, and worst-case loading because nominal interface capability alone does not guarantee system-level signal integrity.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The STM32L051K6U6 is an industrial and commercial microcontroller rather than an AEC-Q100 automotive-qualified ordering code. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.

数据核验日期: 2026-11-19 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

STM32L051K6U6 datasheet STM32L051K6U6 pinout STM32L051K6U6 datasheet pdf STM32L051K6U6 specifications STM32L051K6U6 equivalent STM32L051K6U6 replacement STM32L051K6U6 cross reference STM32L051K6U6 vs STM32L051K8U6 STM32L051K6U6 footprint STM32L051K6U6 application circuit STM32L051K6U6 price STM32L051K6U6 stock STMicroelectronics STM32L051K6U6 STM32L051K6U6 32MHz Cortex-M0+ STM32L051K6U6 32KB Flash UFQFPN

相关元器件 & 术语

STMicroelectronics STM32L051K6U6 STM32L051K6 STM32L051K8U6 STM32L031K6U6 STM32L021K6U6 STM32L041K6U6 STM32L071K6U6 Arm Cortex-M0+ STM32L0 ultra-low-power microcontroller 32-bit RISC core microcontroller embedded microcontroller semiconductor 32-UFQFPN QFN family surface-mount device SMD packaging 12-bit ADC I2C SPI UART PWM EEPROM
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情