STM32L053R8H6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
料号: STM32L053R8H6 ✓ 量产中STM32L053R8H6 概述
An ultra-low-power microcontroller is an embedded semiconductor designed to perform control, measurement, communications, and data-processing tasks while minimizing energy consumption. The STM32L053 belongs to the STM32L0 low-power MCU family, combining a compact Cortex-M0+ core with energy-saving modes for battery-powered and always-connected products. Its USB, LCD, and mixed-signal peripherals reduce the need for external components in compact embedded systems.
Key features include a 32 MHz Cortex-M0+ CPU, 64 KB of Flash, 8 KB of SRAM, 2 KB of EEPROM, USB 2.0 crystal-less connectivity, and an LCD controller. The MCU also integrates two ultra-low-power comparators sharing an internal or external reference voltage, plus ADC and DAC functions. These resources support low-power sensor nodes, USB-connected accessories, small human-machine interfaces, and portable measurement instruments.
The STM32L053R8H6 provides a balanced architecture for embedded control applications where USB connectivity and low-power operation are more important than high processing throughput. Its 1.8 V to 3.6 V operating range accommodates single-cell lithium battery systems after suitable regulation, as well as 3.3 V industrial and consumer equipment. The wide -40 °C to +125 °C temperature range supports applications across industrial, automotive-adjacent, and extended-temperature environments.
Typical applications include USB-connected industrial sensors, compact data loggers, low-cost USB power and monitoring accessories, LCD-equipped control panels, and battery-operated diagnostic instruments. The LCD controller is particularly useful for small local displays, while USB enables configuration, firmware updates, and data transfer over a standard serial interface. The ADC, DAC, and comparators support direct sensing and signal-conditioning functions.
Designers should use the manufacturer pin-description table when assigning PCB tracks and should confirm the exposed-pad, power, decoupling, and programming requirements for the 64-TFBGA package. USB layout requires careful attention to signal integrity, impedance control, and the placement of its supporting components. Low-power designs should also account for the selected sleep, stop, and standby modes when defining the product's average-current budget.
This product page combines the manufacturer device description and datasheet with practical packaging, application, replacement, and design guidance for engineers evaluating the STM32L053R8H6 in compact USB-enabled embedded products.
直接替换替代料: STM32L053R8H6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM32L053R8H6 (相同外形与封装尺寸) ——差异在于 Flash Memory, Operating Temperature Range.
STM32L053R8H6D
✅ 直接替换📋 参考替代料(不在目录中)
STM32L051R8H6
✅ 直接替换联系询价
查看数据手册 →STM32L053R6H6
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM32L053R8H6TR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM32L053R8H6T
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM32L053R8H6 最大额定值与电气特性
| Product Type | Ultra-low-power 32-bit microcontroller |
| CPU Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| USB Interface | USB 2.0 crystal-less |
| 工作电源电压 | 1.8 V to 3.6 V |
| Power-Down Supply Voltage | 1.65 V to 3.6 V without BOR option |
| 工作温度范围 | -40 °C to +125 °C |
| 封装 | 64-TFBGA (5 x 5 mm) |
| 安装类型 | Surface mount |
| LCD Support | Yes |
| ADC | Yes |
| DAC | Yes |
| Comparators | 2 ultra-low-power comparators |
| Comparator Reference | Internal or external reference voltage |
STM32L053R8H6 64-tfbga (5 x 5 mm) 引脚配置指南
STM32L053R8H6(64-tfbga (5 x 5 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM32L053R8H6.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32L053R8H6 适用于 6 应用s: USB-connected industrial sensor, Portable USB data logger, LCD-equipped control panel, Battery-powered diagnostic instrument, USB peripheral accessory, Smart sensor and IoT node.
USB-connected industrial sensor
The STM32L053R8H6 fits a compact USB sensor node because it combines a 32 MHz Arm Cortex-M0+ core with crystal-less USB 2.0 connectivity and low-power operating modes. The device can acquire sensor data through its ADC, monitor thresholds with two comparators, and communicate through USB without requiring a separate USB controller. Its 64 KB of Flash and 8 KB of SRAM support a focused acquisition and control application. The 1.8 V to 3.6 V operating range also simplifies integration with regulated 3.3 V industrial rails, while the -40 °C to +125 °C range supports extended-temperature deployments.
推荐
Portable USB data logger
The STM32L053R8H6 is appropriate for a portable USB data logger that must remain energy efficient while recording sensor information. Its Cortex-M0+ processor runs at up to 32 MHz, while 64 KB of Flash stores firmware and 8 KB of SRAM handles active acquisition and buffering. Crystal-less USB 2.0 provides a direct interface to a host computer for configuration, downloads, and stored data transfer. Low-power modes can be used between measurement intervals, making the MCU suitable for battery-operated field equipment operating from a regulated low-voltage source.
推荐
LCD-equipped control panel
The STM32L053R8H6 supports compact LCD control panels because the manufacturer identifies LCD support alongside a 32 MHz Cortex-M0+ core and 64 KB of Flash. The MCU can manage local user-interface input, indicator logic, and low-speed configuration storage while retaining USB connectivity for service access. Its ADC, DAC, and dual comparators allow the same controller to supervise analog conditions rather than acting only as a display interface. The 64-TFBGA 5 x 5 mm package helps reduce board area in space-constrained control products.
推荐
Battery-powered diagnostic instrument
The STM32L053R8H6 is well suited to battery-powered diagnostic instruments that combine measurement, local interaction, and USB service connectivity. Its 1.8 V to 3.6 V operating range permits integration with low-voltage regulated power systems, while stop and standby capabilities support duty-cycled operation. The 2 KB of EEPROM preserves small configuration records, the ADC supports analog measurement, and the DAC can generate reference or test signals. USB 2.0 enables data transfer and configuration without requiring a separate wired interface controller.
推荐
USB peripheral accessory
The STM32L053R8H6 can implement a compact USB peripheral accessory when the product requires more logic than a simple protocol bridge. Its 32 MHz Cortex-M0+ core handles configuration, control, and data conditioning, while USB 2.0 crystal-less connectivity simplifies USB implementation. The available Flash, SRAM, EEPROM, ADC, DAC, and comparators allow a single MCU to supervise an analog front end and communicate with a host. The small 5 x 5 mm TFBGA package supports dense USB accessories and compact adapter designs.
推荐
Smart sensor and IoT node
The STM32L053R8H6 fits a smart sensor node that combines low-power sensing with occasional USB communication. The Cortex-M0+ core provides adequate control performance at up to 32 MHz, and the 64 KB of Flash supports embedded firmware and protocol handling. Two low-power comparators can implement threshold detection, while the ADC provides direct analog acquisition and the DAC supports stimulus generation where required. Crystal-less USB allows configuration and diagnostics from a host computer, while the device's low-power modes help reduce average consumption in duty-cycled IoT deployments.
推荐
推荐产品汇总
工程参考数据: STM32L053R8H6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32L053R8H6D | STM32L051R8H6 | STM32L053R6H6 | STM32L053R8H6TR | STM32L053R8H6T |
|---|---|---|---|---|---|---|
| Package | 64-TFBGA (5 x 5 mm) | 64-TFBGA (5 x 5 mm) | 64-TFBGA (5 x 5 mm) | 64-TFBGA (5 x 5 mm) | 64-TFBGA (5 x 5 mm) | 64-TFBGA (5 x 5 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 32 KB | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Operating Supply Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
关键差异点
- USB, LCD, and mixed-signal integration in one low-power MCU (对比 STM32L051R8H6)
- 64 KB Flash for firmware and data handling (对比 STM32L053R6H6)
- Directly related ordering variant with matching principal parameters (对比 STM32L053R8H6D)
设计说明
Follow the manufacturer land pattern and ball-map instructions for the 64-TFBGA 5 x 5 mm package. Place the required input and bulk bypass capacitors close to their associated supply balls, provide a clean ground reference under the device where the land pattern permits, and route high-speed USB signals over a continuous reference plane. Because the package is small, verify solder mask, paste, and assembly requirements during PCB and process development.
Treat the USB D+ and D- pair as a controlled-impedance differential route and avoid splits, voids, and unnecessary right-angle transitions in the reference plane. Keep the USB transceiver support network placement consistent with the manufacturer reference layout and minimize stub lengths from the MCU. Validate the completed layout with the intended cable, connector, enclosure, and PCB stack-up before production release.
Build the power budget from the actual operating mode, frequency, active peripherals, and I/O load rather than using a single nominal current value. Confirm that the supply remains within 1.8 V to 3.6 V during normal operation and respects the 1.65 V power-down condition only with the stated BOR configuration. Include enough local decoupling to control supply impedance during USB transmit and analog-conversion activity.
Do not treat a related STM32L0 order code as automatically interchangeable. Confirm the exact suffix, 64-TFBGA 5 x 5 mm ball map, USB behavior, LCD resources, ADC and DAC functions, firmware startup configuration, and temperature grade against the product requirements. For PCB revisions, compare the manufacturer pin-description table directly rather than relying on the family name or a distributor cross-reference result.
合规信息
The device is listed by the manufacturer as an ultra-low-power STM32L0 microcontroller, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified. Confirm compliance and qualification status for the exact ordering code before production release.