STMicroelectronics

STM32L053R8H6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

부품 번호: STM32L053R8H6 ✓ 활성
1.8 V to 3.6 V Vdss 64-TFBGA (5 x 5 mm) Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

STM32L053R8H6 개요

The STMicroelectronics STM32L053R8H6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M0+ processor, operating at up to 32 MHz with 64 KB of Flash memory and 8 KB of SRAM. It is available in a 64-TFBGA 5x5 mm package and includes USB 2.0 connectivity, LCD support, ADC and DAC peripherals, and 2 KB of EEPROM. The device operates from 1.8 V to 3.6 V, with operation down to 1.65 V in power-down mode when the brown-out detector is disabled.

An ultra-low-power microcontroller is an embedded semiconductor designed to perform control, measurement, communications, and data-processing tasks while minimizing energy consumption. The STM32L053 belongs to the STM32L0 low-power MCU family, combining a compact Cortex-M0+ core with energy-saving modes for battery-powered and always-connected products. Its USB, LCD, and mixed-signal peripherals reduce the need for external components in compact embedded systems.

Key features include a 32 MHz Cortex-M0+ CPU, 64 KB of Flash, 8 KB of SRAM, 2 KB of EEPROM, USB 2.0 crystal-less connectivity, and an LCD controller. The MCU also integrates two ultra-low-power comparators sharing an internal or external reference voltage, plus ADC and DAC functions. These resources support low-power sensor nodes, USB-connected accessories, small human-machine interfaces, and portable measurement instruments.

The STM32L053R8H6 provides a balanced architecture for embedded control applications where USB connectivity and low-power operation are more important than high processing throughput. Its 1.8 V to 3.6 V operating range accommodates single-cell lithium battery systems after suitable regulation, as well as 3.3 V industrial and consumer equipment. The wide -40 °C to +125 °C temperature range supports applications across industrial, automotive-adjacent, and extended-temperature environments.

Typical applications include USB-connected industrial sensors, compact data loggers, low-cost USB power and monitoring accessories, LCD-equipped control panels, and battery-operated diagnostic instruments. The LCD controller is particularly useful for small local displays, while USB enables configuration, firmware updates, and data transfer over a standard serial interface. The ADC, DAC, and comparators support direct sensing and signal-conditioning functions.

Designers should use the manufacturer pin-description table when assigning PCB tracks and should confirm the exposed-pad, power, decoupling, and programming requirements for the 64-TFBGA package. USB layout requires careful attention to signal integrity, impedance control, and the placement of its supporting components. Low-power designs should also account for the selected sleep, stop, and standby modes when defining the product's average-current budget.

This product page combines the manufacturer device description and datasheet with practical packaging, application, replacement, and design guidance for engineers evaluating the STM32L053R8H6 in compact USB-enabled embedded products.

드롭인 대체품: STM32L053R8H6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: STM32L053R8H6 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Operating Temperature Range.

STMicroelectronics
Flash Memory: 64 KB (64K x 8)
Operating Temperature Range: -40 °C to +85 °C
비교 대상: STM32L053R8H6 →

STM32L053R8H6D

✅ 드롭인
📦 64-TFBGA (5 x 5 mm)
Core frequency 32 MHz and Flash memory 64 KB match exactly; ordering suffix differs

📋 참조 대체품 (카탈로그에 없음)

STM32L051R8H6

✅ 드롭인
STMicroelectronics
📦 64-TFBGA (5 x 5 mm)
Ultra-low-power 32-bit microcontroller · Arm Cortex-M0+ · 32-bit RISC · 32 MHz · 64 KB (64K x 8) · 12 bit · -40 °C to +85 °C · 64-TFBGA (5 x 5 mm)

가격 문의

데이터시트 보기 →

STM32L053R6H6

✅ 드롭인 ⚠️ 사양 미검증
📦 64-TFBGA (5 x 5 mm)
Flash memory is 32 KB versus 64 KB, a 50% reduction; CPU frequency remains 32 MHz

📋 참조 대체품 (카탈로그에 없음)

STM32L053R8H6TR

✅ 드롭인 ⚠️ 사양 미검증
📦 64-TFBGA (5 x 5 mm)
Core frequency 32 MHz, Flash memory 64 KB, and package match; orderable suffix differs

📋 참조 대체품 (카탈로그에 없음)

STM32L053R8H6T

✅ 드롭인 ⚠️ 사양 미검증
📦 64-TFBGA (5 x 5 mm)
Core frequency 32 MHz, Flash memory 64 KB, and package match; orderable suffix differs

📋 참조 대체품 (카탈로그에 없음)

STM32L053R8H6 최대 정격 & 전기적 특성

Product Type Ultra-low-power 32-bit microcontroller
CPU Core Arm Cortex-M0+
Maximum CPU Frequency 32 MHz
Flash Memory 64 KB
SRAM 8 KB
EEPROM 2 KB
USB Interface USB 2.0 crystal-less
동작 공급 전압 1.8 V to 3.6 V
Power-Down Supply Voltage 1.65 V to 3.6 V without BOR option
동작 온도 범위 -40 °C to +125 °C
패키지 64-TFBGA (5 x 5 mm)
실장 유형 Surface mount
LCD Support Yes
ADC Yes
DAC Yes
Comparators 2 ultra-low-power comparators
Comparator Reference Internal or external reference voltage

STM32L053R8H6 64-tfbga (5 x 5 mm) 핀 구성 가이드

STM32L053R8H6(64-tfbga (5 x 5 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

STM32L053R8H6의 64-tfbga (5 x 5 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: STM32L053R8H6.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

STM32L053R8H6 적합 용도: 6 애플리케이션s: USB-connected industrial sensor, Portable USB data logger, LCD-equipped control panel, Battery-powered diagnostic instrument, USB peripheral accessory, Smart sensor and IoT node.

🏭

USB-connected industrial sensor

The STM32L053R8H6 fits a compact USB sensor node because it combines a 32 MHz Arm Cortex-M0+ core with crystal-less USB 2.0 connectivity and low-power operating modes. The device can acquire sensor data through its ADC, monitor thresholds with two comparators, and communicate through USB without requiring a separate USB controller. Its 64 KB of Flash and 8 KB of SRAM support a focused acquisition and control application. The 1.8 V to 3.6 V operating range also simplifies integration with regulated 3.3 V industrial rails, while the -40 °C to +125 °C range supports extended-temperature deployments.

📱

Portable USB data logger

The STM32L053R8H6 is appropriate for a portable USB data logger that must remain energy efficient while recording sensor information. Its Cortex-M0+ processor runs at up to 32 MHz, while 64 KB of Flash stores firmware and 8 KB of SRAM handles active acquisition and buffering. Crystal-less USB 2.0 provides a direct interface to a host computer for configuration, downloads, and stored data transfer. Low-power modes can be used between measurement intervals, making the MCU suitable for battery-operated field equipment operating from a regulated low-voltage source.

📺

LCD-equipped control panel

The STM32L053R8H6 supports compact LCD control panels because the manufacturer identifies LCD support alongside a 32 MHz Cortex-M0+ core and 64 KB of Flash. The MCU can manage local user-interface input, indicator logic, and low-speed configuration storage while retaining USB connectivity for service access. Its ADC, DAC, and dual comparators allow the same controller to supervise analog conditions rather than acting only as a display interface. The 64-TFBGA 5 x 5 mm package helps reduce board area in space-constrained control products.

💊

Battery-powered diagnostic instrument

The STM32L053R8H6 is well suited to battery-powered diagnostic instruments that combine measurement, local interaction, and USB service connectivity. Its 1.8 V to 3.6 V operating range permits integration with low-voltage regulated power systems, while stop and standby capabilities support duty-cycled operation. The 2 KB of EEPROM preserves small configuration records, the ADC supports analog measurement, and the DAC can generate reference or test signals. USB 2.0 enables data transfer and configuration without requiring a separate wired interface controller.

🖥️

USB peripheral accessory

The STM32L053R8H6 can implement a compact USB peripheral accessory when the product requires more logic than a simple protocol bridge. Its 32 MHz Cortex-M0+ core handles configuration, control, and data conditioning, while USB 2.0 crystal-less connectivity simplifies USB implementation. The available Flash, SRAM, EEPROM, ADC, DAC, and comparators allow a single MCU to supervise an analog front end and communicate with a host. The small 5 x 5 mm TFBGA package supports dense USB accessories and compact adapter designs.

🧩

Smart sensor and IoT node

The STM32L053R8H6 fits a smart sensor node that combines low-power sensing with occasional USB communication. The Cortex-M0+ core provides adequate control performance at up to 32 MHz, and the 64 KB of Flash supports embedded firmware and protocol handling. Two low-power comparators can implement threshold detection, while the ADC provides direct analog acquisition and the DAC supports stimulus generation where required. Crystal-less USB allows configuration and diagnostics from a host computer, while the device's low-power modes help reduce average consumption in duty-cycled IoT deployments.

추천 제품 요약

NUCLEO-L053R8 Prototype board for STM32L053R8 development 사용처: USB-connected industrial sensor, Portable USB data logger, LCD-equipped control panel, Battery-powered diagnostic instrument, USB peripheral accessory, Smart sensor and IoT node
What is the operating voltage of the STM32L053R8H6?
The STM32L053R8H6 operates from 1.8 V to 3.6 V for normal operation. According to the STMicroelectronics STM32L053R8 datasheet, the supply range extends down to 1.65 V in power-down mode when the brown-out detector option is disabled. This makes the device suitable for low-voltage battery-powered systems, provided the power source includes appropriate regulation and protection.
What are the key specifications of STM32L053R8H6 that engineers should know?
The STM32L053R8H6 is a 32 MHz Arm Cortex-M0+ microcontroller with 64 KB of Flash, 8 KB of SRAM, 2 KB of EEPROM, USB 2.0 crystal-less connectivity, and LCD support. According to the STMicroelectronics manufacturer datasheet, it also includes ADC, DAC, two ultra-low-power comparators, and operation from 1.8 V to 3.6 V. Its 64-TFBGA package measures 5 x 5 mm.
What is the STM32L053R8H6 used for?
The STM32L053R8H6 is used for compact embedded systems that require low-power operation, USB connectivity, and local display support. Typical uses include USB sensor nodes, portable data loggers, monitoring accessories, LCD control panels, and diagnostic instruments. Its 32 MHz Cortex-M0+ core, mixed-signal peripherals, and 64 KB of Flash provide enough capability for control and communication without a higher-power processor.
Where can I download the STM32L053R8H6 datasheet PDF?
The STM32L053R8H6 datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32l053r8.pdf. The manufacturer document covers the STM32L053x6 and STM32L053x8 family, including the STM32L053R8 device. Use its pin-description table, electrical characteristics, memory map, and application guidance when designing the 64-TFBGA layout.
Where can I find the STM32L053R8H6 pinout?
The STM32L053R8H6 pinout is documented in the STM32L053R8 manufacturer datasheet under the package and pin-description sections. The device uses a 64-TFBGA 5 x 5 mm package, so all 64 balls must be assigned, including supply, ground, reset, programming, and peripheral functions. Use the datasheet ordering-information table to confirm the exact pin configuration before routing the PCB.
Can STM32L051R8H6 replace STM32L053R8H6?
The STM32L051R8H6 is the closest same-package candidate identified for replacement review, but engineers should verify feature compatibility in the manufacturer documentation. The STM32L053R8H6 has a 32 MHz Cortex-M0+ core, 64 KB of Flash, USB 2.0, LCD support, and a 64-TFBGA 5 x 5 mm package. The STM32L051 family is a related STM32L0 variant with a different peripheral mix.
What can replace the STM32L053R8H6?
A replacement should retain the 64-TFBGA 5 x 5 mm footprint, 32 MHz Cortex-M0+ performance, 64 KB of Flash, USB 2.0, and the required peripheral functions. Same-family STM32L053 variants are the most practical candidates, while STM32L051R8H6 requires a feature-by-feature review. The STM32L053R8H6D is also listed as a directly related 64-TFBGA 5 x 5 mm ordering variant.
Is STM32L053R8H6 suitable for USB sensor devices?
The STM32L053R8H6 is suitable for USB-connected sensor devices when the design needs a low-power Cortex-M0+ controller rather than high processing throughput. According to the STMicroelectronics manufacturer datasheet, the MCU supports crystal-less USB 2.0 and includes ADC, DAC, and two comparators. The 64 KB of Flash and 8 KB of SRAM are appropriate for compact acquisition, control, and communication firmware.
STM32L053R8H6 vs STM32L051R8H6 - which is better for a display device?
The STM32L053R8H6 is generally the stronger choice for an LCD-equipped product because its manufacturer listing explicitly identifies LCD support, along with USB 2.0, ADC, and DAC. The STM32L051R8H6 belongs to the related STM32L051 family, but its feature set differs. Both use the 64-TFBGA 5 x 5 mm format, so final selection should follow the required display, USB, analog, and firmware requirements.
When should I choose STM32L053R8H6 over STM32L051R8H6?
Choose the STM32L053R8H6 when the design benefits from the STM32L053 family's LCD, USB 2.0, ADC, DAC, and comparator feature set. According to STMicroelectronics device information, the part provides 64 KB of Flash, 8 KB of SRAM, and a 32 MHz Cortex-M0+ core. Select STM32L051R8H6 only after confirming that its different peripheral configuration still satisfies the product requirements.
How much current does STM32L053R8H6 use in low-power modes?
The STM32L053R8H6 is designed around multiple low-power operating modes, but a single current value does not describe the complete product. Current depends on the selected sleep, stop, or standby mode, peripheral activity, operating frequency, and regulator state. Consult the STM32L053R8 manufacturer datasheet's power-consumption tables and measure the final board configuration against the application's battery-life target.
Where to buy STM32L053R8H6 online?
Use the Request a Quote form on this page to request STM32L053R8H6 availability, quantity pricing, and delivery terms. The manufacturer product page and manufacturer datasheet provide the authoritative device information, while the listing information identifies the exact 64-TFBGA 5 x 5 mm ordering code. Confirm the suffix, package, quantity, and target date when placing a production order.
What is the price of STM32L053R8H6?
Use the Request a Quote form on this page for current STM32L053R8H6 pricing and stock confirmation. The structured pricing panel reflects changing channel, quantity, and availability conditions, so the request form is the appropriate route for a current purchasing quotation. Specify the required quantity, target delivery date, and whether you need the exact 64-TFBGA 5 x 5 mm suffix.
What is the lead time for STM32L053R8H6?
Request the current lead time for STM32L053R8H6 through the Request a Quote form on this page. Lead time can vary with order quantity, component availability, packaging requirements, and production scheduling. The manufacturer product page is the appropriate technical reference for the device, while the quotation request allows procurement to confirm allocation and a committed delivery interval.
Is STM32L053R8H6 in stock?
Use the Request a Quote form on this page to confirm current STM32L053R8H6 stock and an orderable quantity. Inventory can change quickly and may differ by package suffix, order quantity, and delivery region. When requesting a quotation, identify STM32L053R8H6 as a 64-TFBGA 5 x 5 mm component and provide the required production quantity and target date.
What is the best STMicroelectronics equivalent for STM32L053R8H6?
The closest same-manufacturer candidates are the STM32L053R8H6D ordering variant and the related STM32L051R8H6 device. The STM32L053R8H6D retains the 32 MHz Cortex-M0+ core, 64 KB of Flash, and 64-TFBGA 5 x 5 mm package, while the STM32L051R8H6 requires closer peripheral review. Neither should be treated as automatically interchangeable without checking the manufacturer datasheet and firmware requirements.

엔지니어링 참조 데이터: STM32L053R8H6 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the STM32L053R8H6 when a compact design needs 64 KB of Flash, 8 KB of SRAM, crystal-less USB 2.0, LCD support, and integrated ADC and DAC functions in a 64-TFBGA 5 x 5 mm package. Select STM32L053R8H6D when its ordering suffix and commercial conditions better match the procurement plan while the core, memory, and package remain equivalent. Use STM32L053R6H6 only when 32 KB of Flash is sufficient; it halves the available Flash. Consider STM32L051R8H6 only after confirming that its different peripheral configuration meets the display, USB, analog, and firmware requirements. For any substitution, verify the exact ball map, temperature grade, supply limits, USB implementation, and peripheral assignment against the manufacturer datasheet rather than relying on family naming alone.

대체품과의 비교

파라미터 이 제품 STM32L053R8H6D STM32L051R8H6 STM32L053R6H6 STM32L053R8H6TR STM32L053R8H6T
Package 64-TFBGA (5 x 5 mm) 64-TFBGA (5 x 5 mm) 64-TFBGA (5 x 5 mm) 64-TFBGA (5 x 5 mm) 64-TFBGA (5 x 5 mm) 64-TFBGA (5 x 5 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 64 KB 64 KB 64 KB 32 KB 64 KB 64 KB
SRAM 8 KB 8 KB 8 KB 8 KB 8 KB 8 KB
Operating Supply Voltage 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C

주요 차별점

  • USB, LCD, and mixed-signal integration in one low-power MCU (vs STM32L051R8H6)
  • 64 KB Flash for firmware and data handling (vs STM32L053R6H6)
  • Directly related ordering variant with matching principal parameters (vs STM32L053R8H6D)

설계 노트

Follow the manufacturer land pattern and ball-map instructions for the 64-TFBGA 5 x 5 mm package. Place the required input and bulk bypass capacitors close to their associated supply balls, provide a clean ground reference under the device where the land pattern permits, and route high-speed USB signals over a continuous reference plane. Because the package is small, verify solder mask, paste, and assembly requirements during PCB and process development.

Treat the USB D+ and D- pair as a controlled-impedance differential route and avoid splits, voids, and unnecessary right-angle transitions in the reference plane. Keep the USB transceiver support network placement consistent with the manufacturer reference layout and minimize stub lengths from the MCU. Validate the completed layout with the intended cable, connector, enclosure, and PCB stack-up before production release.

Build the power budget from the actual operating mode, frequency, active peripherals, and I/O load rather than using a single nominal current value. Confirm that the supply remains within 1.8 V to 3.6 V during normal operation and respects the 1.65 V power-down condition only with the stated BOR configuration. Include enough local decoupling to control supply impedance during USB transmit and analog-conversion activity.

Do not treat a related STM32L0 order code as automatically interchangeable. Confirm the exact suffix, 64-TFBGA 5 x 5 mm ball map, USB behavior, LCD resources, ADC and DAC functions, firmware startup configuration, and temperature grade against the product requirements. For PCB revisions, compare the manufacturer pin-description table directly rather than relying on the family name or a distributor cross-reference result.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The device is listed by the manufacturer as an ultra-low-power STM32L0 microcontroller, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified. Confirm compliance and qualification status for the exact ordering code before production release.

데이터 검증일: 2026-11-14 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

STM32L053R8H6 STM32L053R8H6 datasheet STM32L053R8H6 datasheet pdf STM32L053R8H6 pinout STM32L053R8H6 equivalent STM32L053R8H6 replacement STM32L053R8H6 cross reference STM32L053R8H6 footprint STM32L053R8H6 price STM32L053R8H6 stock STMicroelectronics STM32L053R8H6 STM32L053R8H6 vs STM32L051R8H6 STM32L053R8 USB sensor STM32L053R8 32MHz 64KB

관련 부품 & 용어

STMicroelectronics STM32L053R8H6 STM32L053R8H6D STM32L051R8H6 STM32L053R6H6 Arm Cortex-M0+ STM32L0 ultra-low-power microcontroller embedded microcontroller semiconductor USB 2.0 crystal-less USB LCD controller 64-TFBGA TFBGA package family surface mount 64 KB Flash 8 KB SRAM 2 KB EEPROM ADC DAC ultra-low-power comparator 1.8 V to 3.6 V operating range -40 °C to +125 °C temperature range
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기