STM32L053R8H6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
MPN: STM32L053R8H6 ✓ 啟用中STM32L053R8H6 概覽
An ultra-low-power microcontroller is an embedded semiconductor designed to perform control, measurement, communications, and data-processing tasks while minimizing energy consumption. The STM32L053 belongs to the STM32L0 low-power MCU family, combining a compact Cortex-M0+ core with energy-saving modes for battery-powered and always-connected products. Its USB, LCD, and mixed-signal peripherals reduce the need for external components in compact embedded systems.
Key features include a 32 MHz Cortex-M0+ CPU, 64 KB of Flash, 8 KB of SRAM, 2 KB of EEPROM, USB 2.0 crystal-less connectivity, and an LCD controller. The MCU also integrates two ultra-low-power comparators sharing an internal or external reference voltage, plus ADC and DAC functions. These resources support low-power sensor nodes, USB-connected accessories, small human-machine interfaces, and portable measurement instruments.
The STM32L053R8H6 provides a balanced architecture for embedded control applications where USB connectivity and low-power operation are more important than high processing throughput. Its 1.8 V to 3.6 V operating range accommodates single-cell lithium battery systems after suitable regulation, as well as 3.3 V industrial and consumer equipment. The wide -40 °C to +125 °C temperature range supports applications across industrial, automotive-adjacent, and extended-temperature environments.
Typical applications include USB-connected industrial sensors, compact data loggers, low-cost USB power and monitoring accessories, LCD-equipped control panels, and battery-operated diagnostic instruments. The LCD controller is particularly useful for small local displays, while USB enables configuration, firmware updates, and data transfer over a standard serial interface. The ADC, DAC, and comparators support direct sensing and signal-conditioning functions.
Designers should use the manufacturer pin-description table when assigning PCB tracks and should confirm the exposed-pad, power, decoupling, and programming requirements for the 64-TFBGA package. USB layout requires careful attention to signal integrity, impedance control, and the placement of its supporting components. Low-power designs should also account for the selected sleep, stop, and standby modes when defining the product's average-current budget.
This product page combines the manufacturer device description and datasheet with practical packaging, application, replacement, and design guidance for engineers evaluating the STM32L053R8H6 in compact USB-enabled embedded products.
直接替換替代品,適用於 STM32L053R8H6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32L053R8H6 (相同外形與佔位) — 差異在於 Flash Memory, Operating Temperature Range.
STM32L053R8H6D
✅ 直接替換📋 參考替代品(不在目錄中)
STM32L051R8H6
✅ 直接替換聯絡詢價
查看資料表 →STM32L053R6H6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L053R8H6TR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L053R8H6T
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L053R8H6 最大額定值與電氣特性
| Product Type | Ultra-low-power 32-bit microcontroller |
| CPU Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| USB Interface | USB 2.0 crystal-less |
| 工作電源電壓 | 1.8 V to 3.6 V |
| Power-Down Supply Voltage | 1.65 V to 3.6 V without BOR option |
| 工作溫度範圍 | -40 °C to +125 °C |
| 封裝 | 64-TFBGA (5 x 5 mm) |
| 安裝類型 | Surface mount |
| LCD Support | Yes |
| ADC | Yes |
| DAC | Yes |
| Comparators | 2 ultra-low-power comparators |
| Comparator Reference | Internal or external reference voltage |
STM32L053R8H6 64-tfbga (5 x 5 mm) 腳位配置指南
STM32L053R8H6(64-tfbga (5 x 5 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32L053R8H6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32L053R8H6 適用於 6 應用s: USB-connected industrial sensor, Portable USB data logger, LCD-equipped control panel, Battery-powered diagnostic instrument, USB peripheral accessory, Smart sensor and IoT node.
USB-connected industrial sensor
The STM32L053R8H6 fits a compact USB sensor node because it combines a 32 MHz Arm Cortex-M0+ core with crystal-less USB 2.0 connectivity and low-power operating modes. The device can acquire sensor data through its ADC, monitor thresholds with two comparators, and communicate through USB without requiring a separate USB controller. Its 64 KB of Flash and 8 KB of SRAM support a focused acquisition and control application. The 1.8 V to 3.6 V operating range also simplifies integration with regulated 3.3 V industrial rails, while the -40 °C to +125 °C range supports extended-temperature deployments.
推薦
Portable USB data logger
The STM32L053R8H6 is appropriate for a portable USB data logger that must remain energy efficient while recording sensor information. Its Cortex-M0+ processor runs at up to 32 MHz, while 64 KB of Flash stores firmware and 8 KB of SRAM handles active acquisition and buffering. Crystal-less USB 2.0 provides a direct interface to a host computer for configuration, downloads, and stored data transfer. Low-power modes can be used between measurement intervals, making the MCU suitable for battery-operated field equipment operating from a regulated low-voltage source.
推薦
LCD-equipped control panel
The STM32L053R8H6 supports compact LCD control panels because the manufacturer identifies LCD support alongside a 32 MHz Cortex-M0+ core and 64 KB of Flash. The MCU can manage local user-interface input, indicator logic, and low-speed configuration storage while retaining USB connectivity for service access. Its ADC, DAC, and dual comparators allow the same controller to supervise analog conditions rather than acting only as a display interface. The 64-TFBGA 5 x 5 mm package helps reduce board area in space-constrained control products.
推薦
Battery-powered diagnostic instrument
The STM32L053R8H6 is well suited to battery-powered diagnostic instruments that combine measurement, local interaction, and USB service connectivity. Its 1.8 V to 3.6 V operating range permits integration with low-voltage regulated power systems, while stop and standby capabilities support duty-cycled operation. The 2 KB of EEPROM preserves small configuration records, the ADC supports analog measurement, and the DAC can generate reference or test signals. USB 2.0 enables data transfer and configuration without requiring a separate wired interface controller.
推薦
USB peripheral accessory
The STM32L053R8H6 can implement a compact USB peripheral accessory when the product requires more logic than a simple protocol bridge. Its 32 MHz Cortex-M0+ core handles configuration, control, and data conditioning, while USB 2.0 crystal-less connectivity simplifies USB implementation. The available Flash, SRAM, EEPROM, ADC, DAC, and comparators allow a single MCU to supervise an analog front end and communicate with a host. The small 5 x 5 mm TFBGA package supports dense USB accessories and compact adapter designs.
推薦
Smart sensor and IoT node
The STM32L053R8H6 fits a smart sensor node that combines low-power sensing with occasional USB communication. The Cortex-M0+ core provides adequate control performance at up to 32 MHz, and the 64 KB of Flash supports embedded firmware and protocol handling. Two low-power comparators can implement threshold detection, while the ADC provides direct analog acquisition and the DAC supports stimulus generation where required. Crystal-less USB allows configuration and diagnostics from a host computer, while the device's low-power modes help reduce average consumption in duty-cycled IoT deployments.
推薦
推薦產品摘要
工程參考資料,適用於 STM32L053R8H6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32L053R8H6D | STM32L051R8H6 | STM32L053R6H6 | STM32L053R8H6TR | STM32L053R8H6T |
|---|---|---|---|---|---|---|
| Package | 64-TFBGA (5 x 5 mm) | 64-TFBGA (5 x 5 mm) | 64-TFBGA (5 x 5 mm) | 64-TFBGA (5 x 5 mm) | 64-TFBGA (5 x 5 mm) | 64-TFBGA (5 x 5 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 32 KB | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Operating Supply Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
主要差異化特點
- USB, LCD, and mixed-signal integration in one low-power MCU (對比STM32L051R8H6)
- 64 KB Flash for firmware and data handling (對比STM32L053R6H6)
- Directly related ordering variant with matching principal parameters (對比STM32L053R8H6D)
設計說明
Follow the manufacturer land pattern and ball-map instructions for the 64-TFBGA 5 x 5 mm package. Place the required input and bulk bypass capacitors close to their associated supply balls, provide a clean ground reference under the device where the land pattern permits, and route high-speed USB signals over a continuous reference plane. Because the package is small, verify solder mask, paste, and assembly requirements during PCB and process development.
Treat the USB D+ and D- pair as a controlled-impedance differential route and avoid splits, voids, and unnecessary right-angle transitions in the reference plane. Keep the USB transceiver support network placement consistent with the manufacturer reference layout and minimize stub lengths from the MCU. Validate the completed layout with the intended cable, connector, enclosure, and PCB stack-up before production release.
Build the power budget from the actual operating mode, frequency, active peripherals, and I/O load rather than using a single nominal current value. Confirm that the supply remains within 1.8 V to 3.6 V during normal operation and respects the 1.65 V power-down condition only with the stated BOR configuration. Include enough local decoupling to control supply impedance during USB transmit and analog-conversion activity.
Do not treat a related STM32L0 order code as automatically interchangeable. Confirm the exact suffix, 64-TFBGA 5 x 5 mm ball map, USB behavior, LCD resources, ADC and DAC functions, firmware startup configuration, and temperature grade against the product requirements. For PCB revisions, compare the manufacturer pin-description table directly rather than relying on the family name or a distributor cross-reference result.
合規資訊
The device is listed by the manufacturer as an ultra-low-power STM32L0 microcontroller, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified. Confirm compliance and qualification status for the exact ordering code before production release.