STMicroelectronics

STM8L151G2U3TR - 16MHz 4KB Ultra-Low-Power MCU | STMicroelectronics

料号: STM8L151G2U3TR ✓ 量产中
1.65 V to 3.6 V Vdss 28-UFQFPN, 4 x 4 mm Package 16 MHz Speed 4 KB (4K x 8 bits) Memory
最小起订量: 1 |

STM8L151G2U3TR 概述

STMicroelectronics STM8L151G2U3TR is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with a 16 MHz CPU, 4 KB of Flash program memory, and a 28-UFQFPN 4 x 4 mm package. It operates from 1.65 V to 3.6 V and combines an STM8 CPU core capable of reaching 16 MIPS with integrated EEPROM and a compact 28-pin surface-mount footprint.

An ultra-low-power microcontroller is an embedded semiconductor designed to execute control tasks while minimizing energy consumption, especially during standby, sleep, and low-activity operating states. The STM8L family belongs to the broader hierarchy of embedded MCU, microprocessor, embedded controller, and energy-efficient semiconductor products. This positioning makes the STM8L151G2U3TR appropriate for compact battery-operated equipment where low supply voltage, limited board area, and deterministic embedded control are more important than high computational throughput.

The device combines a 16 MHz STM8 core with 4 KB of Flash memory and integrated EEPROM. Its operating voltage range of 1.65 V to 3.6 V supports low-energy embedded systems, while the 28-UFQFPN package limits PCB footprint to 4 x 4 mm. The active product status identifies it as a currently supported member of STMicroelectronics' STM8L low-density product range.

The STM8 architecture provides up to 16 MIPS at a 16 MHz clock, making the device suitable for compact control logic, peripheral management, and low-rate communications handling. Integrated EEPROM allows application-specific parameters, calibration values, or operating state to be retained in nonvolatile memory rather than being stored only in Flash. The exact RAM capacity, interface inventory, and detailed current-consumption figures should be confirmed from the manufacturer datasheet before final design release.

Typical applications include battery-powered sensor nodes, compact industrial control modules, low-energy monitoring equipment, small appliance controllers, and connected embedded accessories. The 1.65 V minimum operating voltage is particularly useful when the design must operate directly from a single-cell energy source or a regulated low-voltage rail. The small package also supports space-constrained boards without requiring a large leaded package.

Designers should confirm startup, reset, clock, decoupling, and programming requirements against the pin-description and application-information sections of the manufacturer datasheet. Keep the 4 x 4 mm UFQFPN layout, exposed-pad requirements, and assembly profile within the manufacturer's recommendations, and verify the complete peripheral configuration for the intended voltage and temperature range before committing the PCB.

This product page combines the manufacturer family information with distributor package, memory, voltage, lifecycle, and ordering details. It also organizes same-family replacement considerations, a parameter comparison, and practical guidance for firmware and PCB decisions that are not evident from a bare ordering code.

直接替换替代料: STM8L151G2U3TR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

STM8L151G2U6TR

✅ 直接替换 ⚠️ 规格未核验
📦 28-UFQFPN, 4 x 4 mm
Same STM8L151G2 family, 4 KB Flash, 16 MHz core, and 28-UFQFPN footprint; ordering-suffix qualification and temperature limits must be verified

📋 参考替代料(不在目录中)

STM8L151G2U3TR 最大额定值与电气特性

Product Type Ultra-low-power 8-bit microcontroller
Product Series STM8L EnergyLite
CPU Core STM8 8-bit core
Maximum CPU Frequency 16 MHz
Maximum CPU Performance Up to 16 MIPS at 16 MHz
Flash Program Memory 4 KB (4K x 8 bits)
工作电源电压 1.65 V to 3.6 V
封装 28-UFQFPN, 4 x 4 mm
Total Terminal Count 28 terminals
Package Body Dimensions 4 x 4 mm
安装类型 No-lead surface mount
Product Status Active
Temperature Grade Automotive grade
RoHS 状态 Compliant

STM8L151G2U3TR 4 x 4 mm 引脚配置指南

STM8L151G2U3TR(4 x 4 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

STM8L151G2U3TR 的 4 x 4 mm 封装引脚图

暂无详细引脚数据: STM8L151G2U3TR.

请参阅 数据手册 以查看完整引脚配置。

典型应用

STM8L151G2U3TR 适用于 6 应用s: Battery-Powered Sensor Nodes, Industrial Environmental Monitoring, Low-Energy IoT Accessories, Compact Appliance Controls, Portable Medical Accessories, Security and Access Control Modules.

🧩

Battery-Powered Sensor Nodes

The STM8L151G2U3TR fits compact battery-powered sensor nodes because its 1.65 V to 3.6 V operating range accommodates low-energy supply rails and its 4 x 4 mm 28-UFQFPN package limits board area. The 16 MHz STM8 core can handle sensor polling, threshold logic, state-machine control, and low-rate data preparation while the 4 KB Flash stores application firmware. Integrated EEPROM provides nonvolatile storage for calibration coefficients, counters, or configuration parameters. A sensor-front-end design should use the MCU to manage measurement sequencing and sleep between events, thereby reducing the energy burden associated with keeping the processor continuously active.

🏭

Industrial Environmental Monitoring

The STM8L151G2U3TR is suitable for industrial environmental-monitoring modules that combine sensing, local filtering, and configurable digital outputs. Its 16 MHz core provides up to 16 MIPS for measurement sequencing, data validation, and control logic, while 4 KB of Flash supports focused firmware rather than a large application stack. The 1.65 V minimum operating voltage supports integration with regulated low-voltage sensor rails, and the 28-UFQFPN package preserves space for dense instrumentation. Use the integrated EEPROM for calibration offsets and device history, and verify the exact operating-temperature grade and industrial qualification requirements for each deployment environment.

🌐

Low-Energy IoT Accessories

The STM8L151G2U3TR can serve as the local controller in a small IoT accessory that wakes periodically, checks inputs, and updates a compact communications interface. Its 1.65 V to 3.6 V supply range is useful for battery-derived systems, and the 16 MHz STM8 processor provides enough control throughput without requiring a higher-power application processor. The 4 KB Flash capacity favors tightly focused firmware, while integrated EEPROM can retain pairing data or configuration values. Because the MCU has limited program memory, communication buffering and feature complexity should be designed conservatively; confirm the required peripherals and memory balance before final firmware allocation.

🔧

Compact Appliance Controls

The STM8L151G2U3TR is appropriate for compact appliance controls where a small controller must coordinate buttons, indicators, actuators, and protection logic. The 16 MHz STM8 core can execute a deterministic control loop and peripheral service routine, while the 4 KB Flash footprint is sufficient for focused embedded firmware. Its 28-UFQFPN package, measuring 4 x 4 mm, supports dense control boards without dominating the enclosure. The 1.65 V to 3.6 V operating range allows operation from a suitable regulated rail, although motor, heater, or mains-connected sections must retain their required isolation and power-conversion circuitry.

💊

Portable Medical Accessories

The STM8L151G2U3TR can support portable medical accessories when the product requires local control, low-voltage operation, and a compact controller rather than a high-performance processor. The device's 1.65 V to 3.6 V range supports energy-conscious designs, and the 16 MHz core can manage button input, status indication, timing, and accessory-specific control sequences. Integrated EEPROM is useful for retaining device settings or calibration-related values. The MCU is not itself a medical-safety certification, so medical applications require appropriate system-level validation, risk assessment, electrical isolation where applicable, and confirmation that the selected ordering grade satisfies the intended environmental requirements.

🔐

Security and Access Control Modules

The STM8L151G2U3TR fits compact access-control and security modules that manage local inputs, lock or relay control, status feedback, and event logic. Its 16 MHz processing rate supports responsive control code, while the small 28-UFQFPN footprint allows the controller to fit within compact door hardware. The 4 KB Flash limit favors a tightly scoped firmware image, and integrated EEPROM can retain configuration data. For powered installations, the 1.65 V to 3.6 V supply range can simplify integration with a regulated low-voltage rail. Security-critical implementations should add the appropriate authentication, tamper-response, and communications protections at the system level rather than relying on MCU selection alone.

What is the STM8L151G2U3TR?
The STM8L151G2U3TR is an ultra-low-power 8-bit STM8L EnergyLite microcontroller from STMicroelectronics. It combines a 16 MHz STM8 core, 4 KB of Flash program memory, integrated EEPROM, and a 28-UFQFPN 4 x 4 mm package. According to the STM8L151/152 family information on the STMicroelectronics product page, this device is intended for compact, low-voltage embedded-control designs.
What are the key specifications of STM8L151G2U3TR that engineers should know?
The STM8L151G2U3TR operates at up to 16 MHz, provides 4 KB of Flash memory, includes nonvolatile EEPROM, and accepts a 1.65 V to 3.6 V supply. It is packaged in a 28-UFQFPN measuring 4 x 4 mm. The manufacturer family information states that the enhanced STM8 core can deliver up to 16 MIPS at 16 MHz, combining compact packaging with useful control-processing performance.
What is the operating voltage of STM8L151G2U3TR?
The STM8L151G2U3TR operates from 1.65 V to 3.6 V. This range is listed for the exact 4 KB STM8L151G2U3TR device and makes it appropriate for low-voltage embedded systems, including regulated single-cell power designs. Confirm the exact operating mode, reset requirements, and peripheral limits against the manufacturer datasheet before finalizing the power architecture.
How much Flash memory and processing speed does STM8L151G2U3TR have?
The STM8L151G2U3TR contains 4 KB, organized as 4K x 8 bits, of Flash program memory and runs from a 16 MHz STM8 core. STMicroelectronics states that the enhanced core can provide up to 16 MIPS at 16 MHz. These figures position the MCU for compact control, monitoring, and peripheral-management tasks rather than graphics-intensive or high-memory workloads.
Where can I download the STM8L151G2U3TR datasheet PDF?
The manufacturer STM8L151/152 product page provides the authoritative documentation for the STM8L151 low-density family that includes STM8L151G2U3TR. Open the technical-document section associated with that page to obtain the current datasheet in PDF format. Use the exact ordering-code documentation when checking package dimensions, pin names, and grade-specific limitations.
Where can I find the STM8L151G2U3TR pinout?
The STM8L151G2U3TR pinout is published in the pin-description and package-information sections of the manufacturer datasheet. The device uses a 28-UFQFPN package with 28 terminals, so the complete 28-pin assignment must be taken from that source rather than inferred from another STM8L variant. Use the pin-description table when assigning tracks, programming, reset, clock, and supply connections.
What package does STM8L151G2U3TR use?
The STM8L151G2U3TR uses a 28-UFQFPN no-lead surface-mount package measuring 4 x 4 mm. Distributor product records for the exact ordering code identify the 28-UFQFPN configuration, while the ordering suffix TR corresponds to tape-and-reel presentation. Confirm exposed-pad, land-pattern, and reflow requirements using the manufacturer package drawing.
Is STM8L151G2U3TR suitable for battery-powered applications?
The STM8L151G2U3TR is suitable for battery-powered applications when the design operates within its 1.65 V to 3.6 V supply range and uses the low-power operating modes supported by the STM8L family. Its 4 x 4 mm package also helps reduce board area. Actual battery life depends on the selected mode, wake-up events, peripherals, and quiescent-current design targets.
Where can I buy STM8L151G2U3TR and check its current availability?
Use the Request a Quote form on this page to request current availability, lead time, and order handling for STM8L151G2U3TR. The TR suffix identifies the tape-and-reel configuration. Quote requests allow the exact MPN, quantity, and shipment destination to be checked without relying on a static listing that may not reflect current inventory.
What is the price of STM8L151G2U3TR?
Current commercial terms for STM8L151G2U3TR are obtained through the Request a Quote form on this page. The request should include the required quantity, target reel format, and delivery country. This approach reflects current channel and project terms more accurately than a static unit figure that can change without notice.
What is the lead time and minimum order quantity for STM8L151G2U3TR?
Current lead time and minimum order quantity for STM8L151G2U3TR should be requested through the Request a Quote form on this page. Include the annual usage, forecast horizon, and required package presentation in the request. The exact ordering code ends in TR for tape-and-reel handling, but quantity availability must be confirmed for the requested production schedule.
Is STM8L151G2U3TR in stock?
Stock for STM8L151G2U3TR can be checked by submitting the Request a Quote form on this page. Include the required quantity and shipment location so the response reflects the requested transaction rather than a generic listing. Because inventory changes by quantity, timing, and region, use the quote response as the operational source for your BOM commitment.
STM8L151G2U3TR vs STM8L151G2U6TR — which one is better?
The STM8L151G2U3TR and STM8L151G2U6TR belong to the same STM8L151G2 low-density family, but ordering-code suffixes can identify different qualification or temperature designations. The STM8L151G2U3TR is identified as automotive grade in its product record. Select the variant only after comparing the exact suffix ratings in the manufacturer datasheet and confirming that the required package and pin arrangement remain unchanged.
When should I choose STM8L151G2U3TR instead of another STM8L MCU?
Choose STM8L151G2U3TR when the design needs a compact 8-bit controller with 4 KB of Flash, integrated EEPROM, a 1.65 V to 3.6 V supply range, and a 28-UFQFPN footprint. It is well suited to low-power monitoring and compact control products. Select a larger STM8L variant when more Flash, RAM, peripheral resources, or a different pin count is required.
What is the best drop-in replacement for STM8L151G2U3TR?
The closest drop-in candidate is an ordering-code variant of the STM8L151G2 family that retains the same 28-UFQFPN footprint, pin assignment, memory configuration, voltage range, and electrical limits. Review the suffix-specific temperature and qualification markings before substitution. The Request a Quote form can confirm a suitable exact MPN, while the manufacturer datasheet remains authoritative for compatibility.
Can STM8L151G2U3TR be replaced without changing the PCB?
A PCB-compatible replacement for STM8L151G2U3TR must use the same 28-UFQFPN footprint and preserve every power, ground, reset, clock, programming, and peripheral connection. It must also meet the 1.65 V to 3.6 V supply requirement and provide at least the 4 KB Flash and integrated EEPROM resources used by the design. Verify the exact suffix and software behavior before approving the substitution.

工程参考数据: STM8L151G2U3TR ——对比、设计指导和合规信息。

选型指南

Choose STM8L151G2U3TR when the design requires an 8-bit ultra-low-power MCU with 4 KB of Flash, integrated EEPROM, operation from 1.65 V to 3.6 V, and a compact 28-UFQFPN 4 x 4 mm footprint. It is a strong fit for battery-powered sensing, compact monitoring modules, appliance controls, and other space-constrained products. STM8L151G2U6TR is the closest same-family ordering-code alternative when its suffix-specific temperature and qualification ratings better match the deployment; the package and principal operating parameters remain aligned. Do not select a larger STM8L151 density unless the design needs more Flash, RAM, pins, or peripherals. Before approving any replacement, verify the complete pin assignment, exposed-pad requirements, clock and reset configuration, peripheral mapping, and firmware compatibility rather than relying only on package dimensions.

与替代料对比

参数 本产品 STM8L151G2U6TR
Package 28-UFQFPN, 4 x 4 mm 28-UFQFPN, 4 x 4 mm
Brand STMicroelectronics STMicroelectronics
CPU Architecture 8-bit STM8 core 8-bit STM8 core
Maximum CPU Frequency 16 MHz 16 MHz
Maximum CPU Performance Up to 16 MIPS at 16 MHz Up to 16 MIPS at 16 MHz
Flash Program Memory 4 KB (4K x 8 bits) 4 KB
Data EEPROM Integrated Integrated
Operating Supply Voltage 1.65 V to 3.6 V 1.65 V to 3.6 V
Product Series STM8L EnergyLite STM8L EnergyLite
Ordering Presentation Tape and reel Tape and reel

关键差异点

  • Compact low-voltage package (对比 STM8L151G2U6TR)
  • Processing capability within a small footprint (对比 STM8L151G2U6TR)
  • Integrated nonvolatile data storage (对比 STM8L151G2U6TR)

设计说明

Treat the 28-UFQFPN as a fine-pitch no-lead assembly and follow the manufacturer's land-pattern and exposed-pad guidance exactly. Place decoupling capacitors close to the applicable supply pins, route the exposed pad to the required thermal and copper area, and inspect the assembly drawing for solderability and reflow constraints. Because the package is only 4 x 4 mm, courtyard, paste, and stencil design deserve review before prototype assembly.

Design the supply path for the documented 1.65 V to 3.6 V operating range and include local high-frequency bypassing near the MCU. Confirm regulator startup, reset release, and brownout behavior against the manufacturer requirements. For battery-powered designs, calculate average current from active and low-activity mode budgets rather than relying only on the 16 MHz operating frequency.

Do not substitute another STM8L151 density or package based on the family name alone. Verify pin compatibility, Flash capacity, RAM, EEPROM, peripheral mapping, supply limits, temperature grade, and qualification markings for the complete ordering code. A footprint match alone does not guarantee that firmware, startup code, peripherals, or memory requirements remain unchanged.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS compliance is listed for the exact device. The distributor record identifies an automotive temperature grade, but AEC-Q100 qualification and other environmental or material compliance claims require confirmation from the manufacturer.

数据核验日期: 2026-11-15 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

STM8L151G2U3TR datasheet STM8L151G2U3TR specifications STM8L151G2U3TR pinout STM8L151G2U3TR datasheet pdf STM8L151G2U3TR equivalent STM8L151G2U3TR replacement STM8L151G2U3TR cross reference STM8L151G2U3TR 28 UFQFPN STM8L151G2U3TR 16MHz 4KB STM8L151G2U3TR low power STM8L151G2U3TR price STM8L151G2U3TR stock STMicroelectronics STM8L151G2U3TR STM8L151G2U3TR vs STM8L151G2U6TR

相关元器件 & 术语

STMicroelectronics STM8L151G2U3TR STM8L151G2U6TR STM8L EnergyLite STM8L151/152 STM8 8-bit core ultra-low-power microcontroller embedded microcontroller microprocessor embedded controller semiconductor 16 MHz 16 MIPS 4 KB Flash integrated EEPROM 1.65 V to 3.6 V 28-UFQFPN QFN package family surface-mount package RoHS AEC-Q100 battery-powered sensor node industrial environmental monitoring compact appliance control IoT accessory
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情