STM8S103K3B6 - 8-Bit 16MHz MCU with 8KB Flash | STMicroelectronics
料号: STM8S103K3B6 ✓ 量产中STM8S103K3B6 概述
An 8-bit microcontroller is a programmable semiconductor device that executes instructions from embedded Flash memory and operates embedded peripherals such as timers, serial interfaces, GPIO, and analog or communication blocks. The STM8S103K3B6 belongs to the STM8S Access Line, a cost-oriented MCU family positioned between simple logic controllers and more complex 32-bit microcontrollers for appliance controls, compact instruments, and industrial automation modules.
The principal device characteristics are an 8-bit architecture, 16 MHz operating frequency, and 8 KB Flash memory. The manufacturer identifies the family as offering 8 Kbyte Flash program memory plus integrated true data EEPROM, supporting designs that need persistent configuration or calibration data separate from executable firmware. Its 32-pin SDIP package provides through-hole assembly and a generous pin count for external interfaces.
Internally, the STM8S103K3B6 uses the STM8 8-bit core and integrates Flash and EEPROM memories with embedded peripherals. The 16 MHz clock provides a practical balance between processing throughput, power consumption, and EMI control for compact control systems. Because this device does not use an ARM Cortex-M core, software migration requires an STM8-specific toolchain and peripheral programming model rather than an STM32 or other Cortex-M environment.
Typical uses include small appliance controllers, temperature and instrument interfaces, compact motor-control modules, keypad panels, LED indicators, and industrial automation blocks. A designer can use the 8 KB Flash partition for a bootloader and application logic, while the integrated true data EEPROM retains settings without consuming Flash program space. The 32-pin SDIP format is especially useful where manual insertion, prototyping, repair, or through-hole assembly is preferred.
When laying out the PCB, preserve the manufacturer's recommended decoupling and oscillator connections and route sensitive inputs away from switching nodes. Verify every peripheral pin assignment against the STM8S103K3B6 pin-description table before assigning signals. Programming, erase and write limits, clock settings, reset behavior, and unused-pin treatment should be followed exactly as described in the manufacturer datasheet.
This product page combines the exact device identity, package information, source links, engineering application guidance, and design checks needed to evaluate the STM8S103K3B6. It also separates confirmed characteristics from specifications that require confirmation from the manufacturer datasheet, helping designers make sourcing and design decisions without relying on assumptions.
直接替换替代料: STM8S103K3B6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM8S103K3B6 (相同外形与封装尺寸) ——差异在于 Package, Product Type.
STM8S103K3B3
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM8S103K3B6 最大额定值与电气特性
| Product Type | 8-bit microcontroller |
| Product Series | STM8S Access Line |
| CPU Architecture | 8-bit STM8 CISC architecture |
| 最大时钟频率 | 16 MHz |
| Flash Program Memory | 8 KB |
| True Data EEPROM | Integrated true data EEPROM |
| 工作电源电压 | 2.95 V to 5.5 V |
| 封装 | 32-pin SDIP |
| 安装类型 | Through-hole |
| 引脚数量 | 32 pins |
| Product Line | STM8S103K3 |
STM8S103K3B6 32-pin sdip 引脚配置指南
STM8S103K3B6(32-pin sdip 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM8S103K3B6.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM8S103K3B6 适用于 6 应用s: Compact Appliance Control, Temperature Instrument Interface, LED Indicator and Keypad Panel, Small Motor Control Module, Industrial Automation Terminal, Battery-Powered Sensor Node.
Compact Appliance Control
The STM8S103K3B6 fits compact appliance controllers because its 8-bit STM8 core, 16 MHz clock, and 8 KB of Flash provide enough control bandwidth for button scanning, state machines, timing, and sensor handling. It can place operating setpoints in true data EEPROM so they survive power cycles without consuming the program area. The 32-pin SDIP package supports through-hole assembly and straightforward hand prototyping. During layout, place the required decoupling close to the supply pins and confirm each peripheral signal against the manufacturer pin-description table before assigning connectors.
Temperature Instrument Interface
A temperature instrument can use the STM8S103K3B6 to perform sensor acquisition, display updates, key input, and alarm logic while operating from either a 3.3 V or 5 V supply. The 16 MHz STM8 core supports responsive control without the complexity of a higher-performance processor, and the 8 KB Flash partition provides room for application firmware. Integrated true data EEPROM is useful for retaining calibration coefficients or configuration records. Use shielded sensor routing, stable analog reference planning, and grounded return paths to avoid introducing measurement noise.
LED Indicator and Keypad Panel
The STM8S103K3B6 is appropriate for keypad scanning and LED indication because the 32-pin SDIP exposes more I/O than the smaller 20-pin STM8S103 variants and retains a 16 MHz control clock. Firmware can debounce keys, maintain menu state, drive indicators, and implement timing functions within the 8 KB Flash budget. The true data EEPROM can store user settings or counters across power cycles. Keep display and switch lines away from noisy power-conversion nodes, and include suitable current-limiting and ESD protection according to the connected circuitry.
Small Motor Control Module
The STM8S103K3B6 can serve as the supervisory controller in a compact motor module, handling command decoding, speed or position-related state, fault flags, and communication with a dedicated power stage. Its 16 MHz, 8-bit architecture is suitable for deterministic supervisory tasks when precision closed-loop control is handled by dedicated hardware. The 8 KB Flash capacity allows a compact application image, while true data EEPROM can retain setup values. Keep the MCU, crystal or timing circuitry, and communication interfaces separated from high-current switching paths.
Industrial Automation Terminal
The STM8S103K3B6 fits small industrial automation terminals that collect discrete inputs, control outputs, and maintain operating counters without requiring a high-end processor. The 32-pin SDIP package offers through-hole assembly, while the 16 MHz clock and 8 KB Flash support an embedded state machine and serial communication routine. True data EEPROM can preserve event counters or configuration values through power interruptions. For industrial deployment, verify the complete operating-temperature grade, isolation strategy, surge protection, and enclosure-related thermal requirements before production release.
Battery-Powered Sensor Node
A battery-powered sensor node can use the STM8S103K3B6 when low component cost, nonvolatile data storage, and low-voltage operation are priorities. The 2.95 V to 5.5 V operating range supports both 3.3 V and 5 V power architectures, and true data EEPROM can hold configuration or measurement references while the main system is unpowered. The 8 KB Flash region is appropriate for a compact acquisition and communication routine. Validate average and sleep-mode current against the battery budget, and use the manufacturer timing diagrams to control wake-up and sensor-settling behavior.
工程参考数据: STM8S103K3B6 ——对比、设计指导和合规信息。
选型指南
设计说明
Use the manufacturer datasheet's pin-description table to assign all 32 pins before routing the PCB. Place the required bypass capacitor adjacent to the device's supply pins and keep the return path short and continuous. The SDIP footprint provides generous through-hole spacing, but analog inputs and communication signals should still be routed away from switching nodes, inductors, and high-current return paths.
The STM8S103K3B6 supports a 2.95 V to 5.5 V operating range. Confirm that every connected peripheral and signal remains within the limits of the selected supply configuration. Verify brownout, reset, and startup behavior in the electrical-characteristics table rather than relying only on nominal voltage labels, because correct power sequencing can be as important as the final regulated level.
Do not substitute an STM8S103 device solely because it has the same core speed and Flash size. Package pin count, pin functions, peripheral mapping, and ordering suffix must match the intended board. In particular, the STM8S103K3B6 uses a 32-pin SDIP package, so smaller 20-pin TSSOP variants require a PCB and schematic redesign rather than a direct drop-in replacement.
合规信息
The current material and environmental declarations for the exact STM8S103K3B6 ordering code were not present in the product references and must be confirmed with STMicroelectronics.