STMicroelectronics

STM8S103K3B6 - 8-Bit 16MHz MCU with 8KB Flash | STMicroelectronics

MPN: STM8S103K3B6 ✓ Active
2.95 V to 5.5 V Vdss 32-pin SDIP Package 16 MHz Speed 8 KB Memory
MOQ: 1 |

STM8S103K3B6 Overview

STMicroelectronics STM8S103K3B6 is an 8-bit STM8S Access Line microcontroller with a 16 MHz clock, 8 KB of Flash program memory, and a 32-pin SDIP package. It is designed for compact embedded-control products that require deterministic peripheral control, low-power operation, and cost-effective integration on a through-hole PCB.

An 8-bit microcontroller is a programmable semiconductor device that executes instructions from embedded Flash memory and operates embedded peripherals such as timers, serial interfaces, GPIO, and analog or communication blocks. The STM8S103K3B6 belongs to the STM8S Access Line, a cost-oriented MCU family positioned between simple logic controllers and more complex 32-bit microcontrollers for appliance controls, compact instruments, and industrial automation modules.

The principal device characteristics are an 8-bit architecture, 16 MHz operating frequency, and 8 KB Flash memory. The manufacturer identifies the family as offering 8 Kbyte Flash program memory plus integrated true data EEPROM, supporting designs that need persistent configuration or calibration data separate from executable firmware. Its 32-pin SDIP package provides through-hole assembly and a generous pin count for external interfaces.

Internally, the STM8S103K3B6 uses the STM8 8-bit core and integrates Flash and EEPROM memories with embedded peripherals. The 16 MHz clock provides a practical balance between processing throughput, power consumption, and EMI control for compact control systems. Because this device does not use an ARM Cortex-M core, software migration requires an STM8-specific toolchain and peripheral programming model rather than an STM32 or other Cortex-M environment.

Typical uses include small appliance controllers, temperature and instrument interfaces, compact motor-control modules, keypad panels, LED indicators, and industrial automation blocks. A designer can use the 8 KB Flash partition for a bootloader and application logic, while the integrated true data EEPROM retains settings without consuming Flash program space. The 32-pin SDIP format is especially useful where manual insertion, prototyping, repair, or through-hole assembly is preferred.

When laying out the PCB, preserve the manufacturer's recommended decoupling and oscillator connections and route sensitive inputs away from switching nodes. Verify every peripheral pin assignment against the STM8S103K3B6 pin-description table before assigning signals. Programming, erase and write limits, clock settings, reset behavior, and unused-pin treatment should be followed exactly as described in the manufacturer datasheet.

This product page combines the exact device identity, package information, source links, engineering application guidance, and design checks needed to evaluate the STM8S103K3B6. It also separates confirmed characteristics from specifications that require confirmation from the manufacturer datasheet, helping designers make sourcing and design decisions without relying on assumptions.

Drop-in alternatives for STM8S103K3B6 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with STM8S103K3B6 (same form factor and footprint) — differing in Package, Product Type.

STMicroelectronics
Package: 32-pin SDIP, 0.300 inch, 0.65 mm pitch
Product Type: 8-bit microcontroller (MCU)
Compare with STM8S103K3B6 →

STM8S103K3B3

✅ Drop-In ⚠️ Specs Unverified
📦 SDIP-32
Temperature grade differs: extended-temperature STM8S103K3B3 has a +125C upper limit versus the industrial-grade target's +85C upper limit, a 40C higher maximum.

📋 Reference alternative (not in catalog)

STM8S103K3B6 Maximum Ratings & Electrical Characteristics

Product Type 8-bit microcontroller
Product Series STM8S Access Line
CPU Architecture 8-bit STM8 CISC architecture
Maximum Clock Frequency 16 MHz
Flash Program Memory 8 KB
True Data EEPROM Integrated true data EEPROM
Operating Supply Voltage 2.95 V to 5.5 V
Package 32-pin SDIP
Mounting Type Through-hole
Pin Count 32 pins
Product Line STM8S103K3

STM8S103K3B6 32-pin sdip Pin Configuration Guide

Pin configuration for STM8S103K3B6 (32-pin sdip package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

32-pin sdip package pinout diagram for STM8S103K3B6

No detailed pinout data available for STM8S103K3B6.

Refer to the datasheet for full pin configuration.

Typical Applications

STM8S103K3B6 is suitable for 6 applications: Compact Appliance Control, Temperature Instrument Interface, LED Indicator and Keypad Panel, Small Motor Control Module, Industrial Automation Terminal, Battery-Powered Sensor Node.

🔧

Compact Appliance Control

The STM8S103K3B6 fits compact appliance controllers because its 8-bit STM8 core, 16 MHz clock, and 8 KB of Flash provide enough control bandwidth for button scanning, state machines, timing, and sensor handling. It can place operating setpoints in true data EEPROM so they survive power cycles without consuming the program area. The 32-pin SDIP package supports through-hole assembly and straightforward hand prototyping. During layout, place the required decoupling close to the supply pins and confirm each peripheral signal against the manufacturer pin-description table before assigning connectors.

🌡️

Temperature Instrument Interface

A temperature instrument can use the STM8S103K3B6 to perform sensor acquisition, display updates, key input, and alarm logic while operating from either a 3.3 V or 5 V supply. The 16 MHz STM8 core supports responsive control without the complexity of a higher-performance processor, and the 8 KB Flash partition provides room for application firmware. Integrated true data EEPROM is useful for retaining calibration coefficients or configuration records. Use shielded sensor routing, stable analog reference planning, and grounded return paths to avoid introducing measurement noise.

💡

LED Indicator and Keypad Panel

The STM8S103K3B6 is appropriate for keypad scanning and LED indication because the 32-pin SDIP exposes more I/O than the smaller 20-pin STM8S103 variants and retains a 16 MHz control clock. Firmware can debounce keys, maintain menu state, drive indicators, and implement timing functions within the 8 KB Flash budget. The true data EEPROM can store user settings or counters across power cycles. Keep display and switch lines away from noisy power-conversion nodes, and include suitable current-limiting and ESD protection according to the connected circuitry.

⚡

Small Motor Control Module

The STM8S103K3B6 can serve as the supervisory controller in a compact motor module, handling command decoding, speed or position-related state, fault flags, and communication with a dedicated power stage. Its 16 MHz, 8-bit architecture is suitable for deterministic supervisory tasks when precision closed-loop control is handled by dedicated hardware. The 8 KB Flash capacity allows a compact application image, while true data EEPROM can retain setup values. Keep the MCU, crystal or timing circuitry, and communication interfaces separated from high-current switching paths.

🏭

Industrial Automation Terminal

The STM8S103K3B6 fits small industrial automation terminals that collect discrete inputs, control outputs, and maintain operating counters without requiring a high-end processor. The 32-pin SDIP package offers through-hole assembly, while the 16 MHz clock and 8 KB Flash support an embedded state machine and serial communication routine. True data EEPROM can preserve event counters or configuration values through power interruptions. For industrial deployment, verify the complete operating-temperature grade, isolation strategy, surge protection, and enclosure-related thermal requirements before production release.

🧩

Battery-Powered Sensor Node

A battery-powered sensor node can use the STM8S103K3B6 when low component cost, nonvolatile data storage, and low-voltage operation are priorities. The 2.95 V to 5.5 V operating range supports both 3.3 V and 5 V power architectures, and true data EEPROM can hold configuration or measurement references while the main system is unpowered. The 8 KB Flash region is appropriate for a compact acquisition and communication routine. Validate average and sleep-mode current against the battery budget, and use the manufacturer timing diagrams to control wake-up and sensor-settling behavior.

What are the key specifications of STM8S103K3B6 that engineers should know?
The STM8S103K3B6 is an 8-bit STM8S Access Line microcontroller rated at 16 MHz with 8 KB of Flash program memory and integrated true data EEPROM. It is packaged in a 32-pin SDIP for through-hole assembly. According to the STMicroelectronics STM8S103K3 product page and the manufacturer datasheet, the device is intended for compact embedded-control applications that need low-cost flash execution and separate nonvolatile data storage.
Where can I download the STM8S103K3B6 datasheet PDF?
The official STM8S103K3 product page is the preferred starting point for the STM8S103K3B6 datasheet and supporting documentation. A manufacturer-hosted datasheet PDF is also available through the STMicroelectronics STM8S103K3 page. The device is identified as an 8-bit, 16 MHz MCU with 8 KB of Flash in a 32-pin SDIP package. Use the pin-description and electrical tables in the manufacturer datasheet before finalizing PCB connections.
Where can I find the STM8S103K3B6 pinout?
The STM8S103K3B6 uses a 32-pin SDIP package, and its authoritative pin assignments must be taken from the manufacturer datasheet's pin-description table. The available product references confirm the 32-pin package but do not expose a complete numbered pin list on this page. Use that table to map power, ground, reset, clock, programming, and I/O functions before laying out or modifying a board.
Is STM8S103K3B6 suitable for low-cost embedded control products?
Yes, the STM8S103K3B6 is suitable for compact embedded-control products because it combines an 8-bit STM8 core, a 16 MHz clock, 8 KB of Flash, and integrated true data EEPROM. According to the STMicroelectronics product page, the STM8S103K3 Access Line targets cost-sensitive applications. Its 32-pin SDIP package also supports conventional through-hole assembly, prototyping, repair, and manual production processes.
What can replace the STM8S103K3B6 with a pin-compatible part?
A valid replacement for the STM8S103K3B6 must use the same 32-pin SDIP footprint and provide pin-to-pin compatibility, not merely similar general-purpose MCU features. No defensible drop-in replacement was established for this exact device, and another manufacturer cannot be recommended without a verified 32-pin SDIP pinout and matching electrical, memory, clock, and peripheral characteristics. A cross-reference result should therefore be treated as a candidate requiring schematic, firmware, and PCB validation rather than an automatic substitution.
What is the best STMicroelectronics equivalent for STM8S103K3B6?
The closest defensible approach is to compare exact STM8S103K3 ordering codes against the manufacturer ordering-information table, because a valid substitution must retain the 32-pin SDIP footprint and preserve pin functions. No separate manufacturer-recommended drop-in equivalent was established for the STM8S103K3B6. The critical checks are pinout, 16 MHz clock capability, 8 KB Flash organization, EEPROM availability, operating-voltage range, peripheral mapping, and firmware compatibility.
Is STM8S103K3B6 the same as STM8S103F3P6?
No, the STM8S103K3B6 and STM8S103F3P6 are not package-compatible replacements. The STM8S103K3B6 is a 32-pin SDIP device, while the STM8S103F3P6 is identified as a 20-pin TSSOP device. Although both belong to the STM8S103 family and can share the 16 MHz, 8 KB Flash architecture, changing package and pin count requires a PCB redesign and a complete peripheral-pin reassignment.
STM8S103K3B6 vs STM8S103F3P6: which is better for a new design?
Choose the STM8S103K3B6 when a 32-pin SDIP footprint and 16 MHz, 8 KB Flash configuration are required. Choose the STM8S103F3P6 when its 20-pin TSSOP package provides the needed board-density advantage and its pinout can support the design. The devices are not drop-in equivalents because their package pin counts differ, so the decision should be based on PCB assembly, available I/O, and schematic impact rather than CPU frequency alone.
When should I choose STM8S103K3B6 instead of an STM8S103F3P6?
Choose the STM8S103K3B6 when through-hole assembly in a 32-pin SDIP package is more valuable than footprint miniaturization. It provides the confirmed 16 MHz operating speed, 8 KB Flash program memory, and integrated true data EEPROM in a package that is straightforward to prototype and service. Select the STM8S103F3P6 instead when its smaller 20-pin TSSOP package satisfies the mechanical design and its available peripheral pins meet the application.
How much flash memory does the STM8S103K3B6 have?
The STM8S103K3B6 contains 8 KB of Flash program memory. According to the STMicroelectronics STM8S103K3 product page, the Access Line family also provides integrated true data EEPROM for persistent data. The Flash region is used for firmware and program constants, while true data EEPROM is intended for parameters, counters, or calibration data that must survive power removal.
What supply voltage does STM8S103K3B6 use?
The STM8S103K3B6 operates from 2.95 V to 5.5 V, supporting both nominal 3.3 V and 5 V systems. The manufacturer documentation describes the 3.3 V and 5 V operating classes and identifies the device as an STM8 8-bit CISC microcontroller with 8 KB of Flash. Confirm pin-specific voltage limits, I/O characteristics, and timing constraints in the electrical-characteristics table for the selected operating conditions.
How is the STM8S103K3B6 programmed and debugged?
The STM8S103K3B6 is programmed through its manufacturer-defined STM8 programming and debug interface, but the exact connector, signal mapping, and supported tools must be confirmed in the device documentation. The 32-pin SDIP package supports through-hole assembly while retaining access to programming and debug functions. Before designing a production board, verify boot and reset behavior, programming voltage requirements, exposed-debug access, and tool compatibility against the manufacturer datasheet.
Is STM8S103K3B6 RoHS and REACH compliant?
The RoHS and REACH status of the STM8S103K3B6 must be confirmed from the current STMicroelectronics product declaration rather than inferred from the device family. The manufacturer product page identifies the exact STM8S103K3 series and confirms the 16 MHz, 8 KB Flash architecture. Request the current material-declaration information during qualification, particularly when the finished equipment is sold into markets with restricted-substance requirements.
Where can I buy STM8S103K3B6 online?
Use the Request a Quote form on this page to request STM8S103K3B6 availability, current lead time, and order handling. The part is an STMicroelectronics 8-bit, 16 MHz microcontroller with 8 KB Flash in a 32-pin SDIP package. Because no explicit quantity-break prices or firm stock quantity are published here, a quote request is the appropriate way to confirm the exact ordering code, delivery schedule, and permissible order quantity.
What is the lead time for STM8S103K3B6?
The current lead time for STM8S103K3B6 should be requested through the Request a Quote form on this page. The exact STM8S103K3B6 ordering code must be confirmed because package, temperature grade, and orderable suffixes can affect availability. No manufacturing schedule or guaranteed delivery date is stated on this page, so production planning should use the lead time and allocation confirmed in the quotation.
Is STM8S103K3B6 in stock?
Request current STM8S103K3B6 stock confirmation through the Request a Quote form on this page. The product is identified as a 32-pin SDIP, 8-bit, 16 MHz STM8S103K3-series microcontroller with 8 KB of Flash, but a firm stock quantity is not published here. Confirm the exact suffix and delivery quantity before reserving parts for a production build or prototype schedule.

Engineering reference data for STM8S103K3B6 — comparison, design guidance, and compliance information.

Selection Guide

Choose the STM8S103K3B6 when a design specifically needs a 32-pin SDIP microcontroller with a 16 MHz STM8 core and 8 KB of Flash. It is particularly practical for prototypes, repairable assemblies, and compact embedded products that benefit from integrated true data EEPROM. Do not treat another STM8S103 package as a drop-in replacement solely on matching clock speed and memory capacity; package pins and peripheral assignments must be verified. No verified cross-manufacturer or exact alternative was established for this ordering code, so a second-source strategy requires a deliberate engineering review and possibly an adapter or PCB redesign. For new production programs, request lifecycle, stock, and lead-time confirmation for the exact suffix and consider whether the chosen SDIP footprint remains appropriate for the intended enclosure and assembly method.

Design Notes

Use the manufacturer datasheet's pin-description table to assign all 32 pins before routing the PCB. Place the required bypass capacitor adjacent to the device's supply pins and keep the return path short and continuous. The SDIP footprint provides generous through-hole spacing, but analog inputs and communication signals should still be routed away from switching nodes, inductors, and high-current return paths.

The STM8S103K3B6 supports a 2.95 V to 5.5 V operating range. Confirm that every connected peripheral and signal remains within the limits of the selected supply configuration. Verify brownout, reset, and startup behavior in the electrical-characteristics table rather than relying only on nominal voltage labels, because correct power sequencing can be as important as the final regulated level.

Do not substitute an STM8S103 device solely because it has the same core speed and Flash size. Package pin count, pin functions, peripheral mapping, and ordering suffix must match the intended board. In particular, the STM8S103K3B6 uses a 32-pin SDIP package, so smaller 20-pin TSSOP variants require a PCB and schematic redesign rather than a direct drop-in replacement.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The current material and environmental declarations for the exact STM8S103K3B6 ordering code were not present in the product references and must be confirmed with STMicroelectronics.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

STM8S103K3B6 datasheet STM8S103K3B6 datasheet pdf STM8S103K3B6 pinout STM8S103K3B6 specifications STM8S103K3B6 equivalent STM8S103K3B6 replacement STM8S103K3B6 cross reference STM8S103K3B6 price STM8S103K3B6 stock STMicroelectronics STM8S103K3B6 STM8S103K3B6 32 pin SDIP STM8S103K3B6 16MHz 8KB Flash STM8S103K3B6 application circuit STM8S103K3B6 programming STM8S103K3B6 vs STM8S103F3P6

Related Components & Terms

STMicroelectronics STM8S103K3B6 STM8S103K3 STM8S103F3P6 STM8S Access Line 8-bit microcontroller MCU embedded microcontroller semiconductor STM8 CISC core 16 MHz clock 8 KB Flash memory true data EEPROM 2.95 V to 5.5 V operating range 32-pin SDIP through-hole package surface mount industrial automation appliance control temperature instrument sensor node motor control module true data EEPROM
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details