Microchip Technology

SY89295UTG - 1024-Tap Programmable Delay Line | Microchip

料号: SY89295UTG ✓ 量产中
2.5 V ±5% Vdss 32-pin TQFP, 7 mm × 7 mm Package 1.5 GHz Speed
最小起订量: 1 |

SY89295UTG 概述

The Microchip SY89295UTG is a programmable LVPECL delay line providing 1024 taps, a 3.2 ns to 14.8 ns adjustable delay range, and 10 ps delay increments in a 32-pin TQFP package. The device operates from a 2.5 V ±5% or 3.3 V ±10% supply and is designed for precision timing and clock-alignment systems.

A programmable delay line is a timing IC that delays a high-speed differential signal by a digitally selected interval. It belongs to the clock and timing IC hierarchy, where it provides deterministic signal-path timing rather than generating a clock. The SY89295UTG combines a 1-input, 32-tap-control architecture with fine delay resolution for circuit calibration, data capture, clock compensation, and communication-system timing.

The principal features are 1024 programmable taps, 10 ps delay granularity, and a maximum delay of 14.8 ns. Its LVPECL interface supports operation from either 2.5 V ±5% or 3.3 V ±10%, while the 7 mm × 7 mm TQFP package supports compact surface-mount designs. These specifications make fine delay calibration practical where fixed-delay elements cannot accommodate board-level timing variation.

Digital control permits the delay to be adjusted while the circuit is operating, supporting calibration and adaptive timing control. The input and output stages use LVPECL-compatible signaling, and the manufacturer describes the device as a precision programmable delay with fine-tune control. Designers must account for control-settling time, reference-clock quality, interconnect delay, and receiver setup and hold requirements when translating nominal delay into system timing accuracy.

Typical applications include high-speed test equipment, serial-interface deskew, clock recovery networks, data-acquisition systems, and telecommunications equipment. The part is particularly useful when a system must compensate for propagation-delay differences across cables, connectors, printed-circuit-board traces, or multiple acquisition channels without changing the physical layout.

Place input and output transmission lines with controlled impedance and minimize discontinuities on the high-speed LVPECL path. Use short, referenced ground-return connections and provide clean, decoupled supply rails because power and ground noise can disturb edge timing. The manufacturer’s pin-description and application information should be used when assigning the 32 package pins and terminating unused outputs.

This page combines the confirmed device parameters, package information, sourcing path, and same-family replacement analysis with practical implementation guidance. It is intended to help engineers determine whether the SY89295UTG provides the required delay range, interface standard, control method, and board footprint for precision timing designs.

直接替换替代料: SY89295UTG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: SY89295UTG (相同外形与封装尺寸) ——差异在于 Package.

Microchip Technology
Package: 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm
对比 SY89295UTG →

SY89295U

✅ 直接替换
📦 32-pin TQFP (7 mm × 7 mm)
Same 1024-tap programmable delay architecture, 3.2 ns to 14.8 ns range, 10 ps increment, and 32-pin TQFP footprint; ordering suffix and qualification options require verification.

📋 参考替代料(不在目录中)

SY89295UTG 规格参数

Device Type Programmable LVPECL delay line
Programmable Tap Count 1024 taps
Minimum Delay 3.2 ns
Maximum Delay 14.8 ns
Delay Increment 10 ps
Input Logic LVPECL
Supply Voltage Option 1 2.5 V ±5%
Supply Voltage Option 2 3.3 V ±10%
Input Count 1 input
Maximum Frequency 1.5 GHz
封装 32-pin TQFP, 7 mm × 7 mm
安装类型 Surface mount

SY89295UTG 32-pin tqfp, 7 mm × 7 mm 引脚配置指南

SY89295UTG(32-pin tqfp, 7 mm × 7 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

SY89295UTG 的 32-pin tqfp, 7 mm × 7 mm 封装引脚图

暂无详细引脚数据: SY89295UTG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

SY89295UTG 适用于 6 应用s: High-Speed Clock Deskew, Data Acquisition Time Alignment, Telecommunications Clock Compensation, Precision Test and Measurement, Parallel Interface Skew Adjustment, Synchronous Communication Path Tuning.

🌐

High-Speed Clock Deskew

The SY89295UTG fits clock-deskew systems that require a differential timing path to be adjusted after board assembly. Its 1024 taps cover a 3.2 ns to 14.8 ns delay range, while 10 ps increments allow finer correction than a coarse programmable delay. Install the device in the LVPECL clock path, drive its digital control inputs from the timing controller, and reserve equal-length impedance-controlled routes for the differential clock. The useful system benefit is active compensation for trace, connector, and receiver variations, although the control path and clock distribution network must add less uncertainty than the correction being sought.

📡

Data Acquisition Time Alignment

The SY89295UTG can align LVPECL clock or trigger paths in a multi-channel data-acquisition system. A maximum delay of 14.8 ns is useful for compensating cable, connector, and board-routing differences, and the 10 ps increment supports finer calibration than fixed delay elements. Place the device close to the affected clock receiver and keep its differential route impedance controlled. Its 1.5 GHz maximum frequency supports high-rate acquisition architectures, but the complete timing budget must include converter aperture, clock distribution skew, cable delay, and digital-control settling.

🌐

Telecommunications Clock Compensation

The SY89295UTG is appropriate for telecommunications equipment that must compensate variable propagation delay in an LVPECL clock or data path. Digital selection across 1024 taps provides a broad tuning range of 3.2 ns to 14.8 ns with 10 ps steps. Use it where field or manufacturing calibration can adjust timing without relocating a fixed-delay component. The implementation should include regulated 2.5 V or 3.3 V supplies, careful LVPECL termination, and short control traces to preserve command-to-delay accuracy across temperature and supply conditions.

🔧

Precision Test and Measurement

The SY89295UTG supports calibration and timing-alignment functions in precision test equipment. Its 10 ps programming increment can refine channel-to-channel alignment, while the 3.2 ns to 14.8 ns range covers common interconnect and fixture delays. The device operates with LVPECL at up to 1.5 GHz, making it useful beside high-speed sampling or clock-distribution circuitry. For best repeatability, place the delay line adjacent to the receiver, maintain consistent transmission-line geometry, and separate sensitive delay-control routing from noisy switching paths.

🖥️

Parallel Interface Skew Adjustment

The SY89295UTG can compensate for fixed skew introduced by a high-speed parallel interface when the chosen signal can be routed through an LVPECL delay line. The adjustable range of up to 14.8 ns and 10 ps step size support board-level trimming after assembly. The design must account for input and output thresholds, reference-plane return paths, and any fixed delay already introduced by external components. Use the digital control interface to sweep the delay during calibration and store the required code for production testing.

🔗

Synchronous Communication Path Tuning

The SY89295UTG is useful in synchronous communication systems where a transmitter, receiver, or retimer must launch a clock or data signal with a calibrated phase offset. Its LVPECL interface, 1.5 GHz maximum frequency, and digitally controlled delay allow fine timing adjustment without changing cable length or board topology. Designers should preserve signal integrity with short differential routes, correct reference-plane grounding, and compliant termination. The programmable delay should be calibrated with the complete transmitter and receiver chain because device-to-device tolerance can otherwise make the nominal 10 ps command increment appear smaller.

推荐产品汇总

SY89295U Same-family programmable delay-line device 用于: High-Speed Clock Deskew, Data Acquisition Time Alignment, Telecommunications Clock Compensation, Precision Test and Measurement, Parallel Interface Skew Adjustment, Synchronous Communication Path Tuning THS7314DR Texas Instruments 用于: High-Speed Clock Deskew, Precision Test and Measurement THS7316DR Texas Instruments 用于: Data Acquisition Time Alignment, Parallel Interface Skew Adjustment THS7315DR Texas Instruments 用于: Telecommunications Clock Compensation, Synchronous Communication Path Tuning
What is the SY89295UTG?
The SY89295UTG is a programmable LVPECL delay line with 1024 taps and an adjustable delay range of 3.2 ns to 14.8 ns. According to the Microchip product information, the delay is digitally controlled in 10 ps increments. It is packaged in a 32-pin TQFP measuring 7 mm × 7 mm and is intended for precision clock and data-path timing applications.
What is the delay range and resolution of the SY89295UTG?
The SY89295UTG provides a minimum delay of 3.2 ns, a maximum delay of 14.8 ns, and 10 ps programming increments. According to the Microchip SY89295U product page, the programmable delay line selects its operating delay through a digital control signal. This combination permits fine calibration of high-speed timing paths.
What supply voltage does the SY89295UTG use?
The SY89295UTG operates from either 2.5 V ±5% or 3.3 V ±10%. According to the Microchip SY89295U product page, both voltage options support its LVPECL signal interface. The appropriate supply arrangement and decoupling network should be selected for the system’s clock and logic levels before PCB layout is finalized.
Where can I download the SY89295UTG datasheet PDF?
The official SY89295U product page provides the manufacturer’s device documentation and links to its datasheet resources. Use the Microchip product page at https://www.microchip.com/en-us/product/SY89295U for the current datasheet, package information, and revision-specific details. The SY89295UTG is the specified 32-pin TQFP ordering code for this programmable delay-line family.
Where can I find the SY89295UTG pinout and package information?
The SY89295UTG uses a 32-pin TQFP package measuring 7 mm × 7 mm. The manufacturer’s SY89295U product page and datasheet contain the authoritative pin-description table and package drawing. Use those documents when assigning power, ground, differential data, and digital control connections because the supplied listing text does not reproduce the individual pin names.
Where can I buy the SY89295UTG online?
The SY89295UTG can be requested through the “Request a Quote” form on this page. The request should identify the exact SY89295UTG ordering code, the required package form, and the production quantity. This route supports direct quotation for component availability, lot traceability, and delivery scheduling without relying on static marketplace pricing.
What is the current price of the SY89295UTG?
The current commercial terms for the SY89295UTG are provided through the “Request a Quote” form on this page. Enter the required quantity and desired delivery location so the current quotation can reflect quantity breaks, component condition, and logistics. Static unit-price figures can become stale and therefore are not embedded in this technical answer.
What is the lead time and stock status for the SY89295UTG?
The SY89295UTG is listed as an active part, but a production lead time must be confirmed for the requested quantity and package format. Use the “Request a Quote” form on this page to obtain current availability, scheduled delivery, and minimum-order information. Include the target shipment date and any required date-code or traceability constraints in the request.
Is the SY89295UTG suitable for high-speed clock deskew?
Yes, the SY89295UTG is suitable for high-speed clock deskew because it provides 1024 digitally selected taps, 10 ps increments, and a maximum delay of 14.8 ns. According to the Microchip product information, the LVPECL interface and programmable delay are intended for precision timing applications. Board-level skew must still include clock distribution, receiver setup and hold, and control-path delay.
When should I choose the SY89295UTG over a fixed delay line?
Choose the SY89295UTG when the delay must be calibrated after assembly, varied during operation, or adjusted to compensate for channel and propagation differences. Its 1024 taps and 10 ps increments provide more control than a fixed delay element. A fixed delay line can be simpler and lower-cost when the required interval is known and does not require tuning.
What can replace the SY89295UTG?
The SY89295U is the closest confirmed same-family drop-in candidate because it is the base ordering code for the same programmable delay-line device and retains the 32-pin TQFP implementation. Confirm the exact package dimensions, control mapping, electrical limits, and temperature grade against the current Microchip documentation before substitution. No verified cross-brand, pin-compatible replacement was identified.
Is the SY89295UTG the same as the SY89295U?
The SY89295UTG and SY89295U identify ordering configurations within the same Microchip programmable delay-line family, including the 1024-tap architecture and 3.2 ns to 14.8 ns delay range. The suffix determines the ordered package or temperature configuration, so engineers should verify the package drawing, temperature grade, and marking requirements before treating the base code as interchangeable.
SY89295UTG vs SY89295U — which is better for a new design?
The SY89295UTG is preferable when the required commercial configuration matches its 32-pin TQFP ordering code and documentation. The SY89295U identifies the underlying device family and can be easier to use during initial evaluation, but its suffix and grade options must be confirmed. Both provide the same stated 1024-tap programmable delay concept; mechanical and temperature requirements determine the final choice.
When should I select SY89295UTG instead of another timing architecture?
Select the SY89295UTG when a system needs an adjustable delay in a differential high-speed clock or data path and can accommodate a 32-pin TQFP device. It is less appropriate when the delay must be extremely wide, the interface is not LVPECL, or a simpler fixed delay is sufficient. PLL-based compensation may be preferable when frequency synthesis and phase adjustment dominate the design.
What are the key specifications of the SY89295UTG that engineers should know?
The key specifications are 1024 programmable taps, a 3.2 ns to 14.8 ns delay range, 10 ps delay increments, LVPECL signaling, and support for 2.5 V ±5% or 3.3 V ±10% operation. The device also provides a maximum operating frequency of 1.5 GHz in a 32-pin, 7 mm × 7 mm TQFP package. These values define its timing, interface, and board-space requirements.

工程参考数据: SY89295UTG ——对比、设计指导和合规信息。

选型指南

Choose the SY89295UTG when the design requires a 32-pin TQFP programmable LVPECL delay line with 1024 taps, a 3.2 ns to 14.8 ns range, and 10 ps adjustment increments. It is well suited to clock deskew, data-acquisition alignment, communication-path compensation, and production calibration where the delay must be changed without a PCB modification. The SY89295U is the closest confirmed same-family choice and can serve as an evaluation or alternative ordering configuration, provided its package, temperature grade, and suffix-specific requirements match the finished design. No verified cross-brand drop-in candidate was identified, so changing manufacturers should not be attempted without a separate pin-, logic-, timing-, and supply-compatibility review. A fixed delay line is preferable when the interval is known and never needs adjustment, while a PLL or delay multiplier is preferable when the design requires frequency synthesis or phase tuning beyond the SY89295UTG’s stated delay range.

与替代料对比

参数 本产品 SY89295U
Brand Microchip Technology Microchip Technology
Package 32-pin TQFP (7 mm × 7 mm) 32-pin TQFP (7 mm × 7 mm)
Device Type Programmable LVPECL delay line Programmable LVPECL delay line
Programmable Tap Count 1024 taps 1024 taps
Delay Range 3.2 ns to 14.8 ns 3.2 ns to 14.8 ns
Delay Increment 10 ps 10 ps
Input Logic LVPECL LVPECL
Supply Voltage 2.5 V ±5% or 3.3 V ±10% 2.5 V ±5% or 3.3 V ±10%
Maximum Frequency 1.5 GHz 1.5 GHz

关键差异点

  • Fine digital delay adjustment (对比 SY89295U)
  • Broad programmable range for interconnect compensation (对比 SY89295U)
  • Compact 32-pin implementation (对比 SY89295U)

设计说明

Treat the LVPECL input and output as controlled-impedance differential paths. Keep trace geometry consistent, maintain a continuous ground reference, and avoid stubs or abrupt layer changes that create reflections. LVPECL terminations and reference-circuit values should follow the manufacturer application guidance because incorrect biasing or return-path discontinuity can reduce edge quality even when the programmed delay is correct.

Place the SY89295UTG close to the clock receiver or timing-critical input, then connect the digital control interface with short, quiet traces. Keep switching-regulator and high-current return paths away from the delay-control pins. The 32-pin TQFP footprint requires careful escape routing because surrounding signal density can make it difficult to maintain consistent differential geometry at the device.

Do not equate the 10 ps programming increment with 10 ps end-to-end timing accuracy. Actual calibration includes input-to-output delay variation, control settling, reference-clock uncertainty, temperature, and supply sensitivity. Use the manufacturer test procedure to characterize the assembled circuit, and record the selected delay code for each channel during calibration.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available product and distributor listings do not establish the complete compliance profile. Confirm RoHS, REACH, lead-free, halogen-free, AEC-Q100, and conflict-minerals status in the current Microchip documentation before qualification.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

SY89295UTG datasheet SY89295UTG pinout SY89295UTG datasheet pdf SY89295UTG equivalent SY89295UTG replacement SY89295UTG cross reference SY89295UTG vs SY89295U SY89295UTG footprint SY89295UTG application circuit SY89295UTG price SY89295UTG stock Microchip SY89295UTG SY89295 32 TQFP pinout 1024 tap programmable delay line

相关元器件 & 术语

Microchip Technology SY89295UTG SY89295U programmable delay line delay-line IC clock and timing IC semiconductor LVPECL differential logic 1024-tap architecture 3.2 ns minimum delay 14.8 ns maximum delay 10 ps delay increment 1.5 GHz maximum frequency 2.5 V supply 3.3 V supply 32-pin TQFP TQFP family surface-mount package clock deskew data acquisition alignment communications timing digital control interface signal integrity
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情