Microchip Technology

SY89832UMI - 1:4 2.5GHz LVDS Clock Buffer | Microchip

料号: SY89832UMI ✓ 量产中
2.5 V Vdss 16-VFQFN exposed pad Package 2.5 GHz Speed
最小起订量: 1 |

SY89832UMI 概述

Microchip Technology SY89832UMI is a 2.5 V, 1:4 LVDS fanout buffer and clock translator rated for operation up to 2.5 GHz in a 16-VFQFN exposed-pad package. It converts one differential input into four differential LVDS outputs, providing a 1:4 fanout ratio for high-speed clock distribution. The device also features internal termination, reducing the number of external termination components required on the input path.

A low-voltage differential signaling clock buffer is a clock-and-timing IC that distributes a differential clock across multiple loads while maintaining signal integrity at high data rates. In the hierarchy, an LVDS clock buffer is a specialized fanout buffer, clock translator, clock distribution IC, and timing component. The differential architecture supports common LVDS clocking environments where noise immunity and controlled edge behavior are important.

The SY89832UMI supports 1:4 fanout, operation to 2.5 GHz, a 2.5 V supply, and internal input termination. Its exposed-pad package supports compact high-speed layouts by providing a direct thermal and electrical path from the die to the PCB ground plane. This combination makes the part suitable for clock trees, parallel data interfaces, communications equipment, and test systems requiring multiple synchronized LVDS outputs.

Compared with a single-ended clock buffer, an LVDS translator maintains a differential signal over the distribution path. The SY89832UMI accepts a differential clock and produces four differential outputs, reducing the number of separate clock-output stages required. Its internal termination simplifies input implementation, although the PCB still requires short, impedance-controlled routing and careful return-path management.

Typical uses include distribution of a high-speed differential clock among multiple loads, recovery of a clock at the receiving end of a link, and generation of multiple synchronized outputs for parallel converters, serializers, or FPGA clock trees. The device is also appropriate for instrumentation where a low-voltage differential clock must be distributed without adding a separate external termination network.

PCB implementation should prioritize continuous reference planes, short clock traces, symmetric routing between differential pairs, and solid grounding under the exposed pad. Follow the manufacturer pin description and recommended layout in the SY89832U datasheet when assigning signals and via structures. Check output loading, trace impedance, and power-decoupling requirements against the device limits before committing the layout.

This page organizes the SY89832UMI clock-buffer specifications, sourcing options, replacement limits, comparison details, and design guidance into one engineering reference. It highlights where the 1:4 LVDS architecture, internal termination, and 16-VFQFN package fit a design while separating verified product facts from parameters that still require confirmation from the manufacturer documentation.

直接替换替代料: SY89832UMI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

SY89832UMI 规格参数

Product Type LVDS clock fanout buffer and translator
Fanout Ratio 1:4
最大时钟频率 2.5 GHz
电源电压 2.5 V
Logic Standard LVDS
Input Termination Internal termination
输出数量 4 differential outputs
封装 16-VFQFN exposed pad
Package Family VFQFN-16
安装类型 Surface mount

SY89832UMI vfqfn-16 引脚配置指南

SY89832UMI(vfqfn-16 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

SY89832UMI 的 vfqfn-16 封装引脚图

暂无详细引脚数据: SY89832UMI.

请参阅 数据手册 以查看完整引脚配置。

典型应用

SY89832UMI 适用于 6 应用s: High-Speed Differential Clock Distribution, FPGA Parallel-Interface Clocking, Communications Link Clock Fanout, High-Speed Test and Measurement, Clock Fanout for Data Converters, Synchronous Industrial Control.

🌐

High-Speed Differential Clock Distribution

The SY89832UMI fits a one-input, four-output differential clock tree because it provides a 1:4 LVDS fanout and is rated for operation up to 2.5 GHz. Place the device close to the master clock source and route four controlled-impedance differential branches to separate receiver groups. The four-output topology reduces the number of separate fanout stages, while LVDS signaling supports cleaner transmission over a properly implemented PCB. Confirm each branch's length, loading, insertion loss, and return path, and use the manufacturer timing data to evaluate skew across the distributed clock.

🖥️

FPGA Parallel-Interface Clocking

The SY89832UMI can supply four differential clock outputs to parallel data-conversion or processing sections that require a common timing reference. Its 1:4 fanout provides a compact way to distribute one 2.5 GHz-capable source without duplicating the input stage across multiple board regions. Keep the input-to-output paths short and symmetric, preserve a continuous ground reference, and match the differential impedance to the receiver. The exposed pad should be connected to the ground plane using the manufacturer's via pattern to maintain thermal and return-path performance.

📡

Communications Link Clock Fanout

The SY89832UMI is appropriate for communications equipment that must convert one differential clock source into four LVDS branches for serializer, deserializer, or interface-controller sections. Differential routing can reduce sensitivity to common-mode noise when the PCB has a continuous reference plane and controlled impedance. The internal input termination simplifies the source interface, but each output still requires correct loading and termination according to the receiver specification. Validate eye opening, jitter budget, branch skew, and loss before using the part in a production communication path.

🔧

High-Speed Test and Measurement

The SY89832UMI can distribute a differential reference clock to multiple acquisition, triggering, or conversion channels in high-speed test equipment. A 1:4 arrangement is useful when four instrument sections need a common source while remaining physically separated on the board. The 2.5 GHz operating capability supports demanding measurement chains, although instrument-level requirements may also include low deterministic jitter, controlled skew, and strict amplitude compliance. Use short matched routes and isolated clock regions to minimize coupling from analog and switching circuitry.

📺

Clock Fanout for Data Converters

The SY89832UMI fits parallel data-converter systems where one differential clock must feed multiple sampling or output sections. Its four differential LVDS outputs allow the clock source to be distributed before long fanout traces reach separate converter banks. The internal input termination reduces external input-network complexity, while the 16-VFQFN exposed pad supports dense placement. Confirm converter input capacitance, clock amplitude requirements, timing skew, and input sensitivity at the operating frequency before finalizing the fanout topology.

🏭

Synchronous Industrial Control

The SY89832UMI can distribute a differential clock among synchronized industrial control sections that operate from the same system timing reference. Differential propagation helps maintain signal quality in electrically noisy equipment when the design follows controlled-impedance and solid-ground rules. Place the fanout buffer near the clock origin so the four outputs can reach separate controller or interface groups with predictable delay. Review the device's supply tolerance, temperature range, output loading, and jitter specifications against the industrial environment before incorporating it into a safety- or mission-critical control path.

What is the SY89832UMI?
The Microchip Technology SY89832UMI is a 2.5 V, 1:4 LVDS clock fanout buffer and translator that converts one differential clock input into four differential LVDS outputs. According to the Microchip Technology product listing, the device operates up to 2.5 GHz and includes internal input termination. It is packaged in a 16-VFQFN exposed-pad package for high-speed surface-mount clock-distribution circuits.
What are the key specifications of SY89832UMI?
The SY89832UMI combines a 1:4 fanout ratio, operation up to 2.5 GHz, a 2.5 V supply, LVDS differential signaling, and internal input termination in a 16-VFQFN exposed-pad package. According to the Microchip Technology product listing, these are its primary architectural characteristics. Output differential voltage, propagation delay, jitter, current consumption, and temperature limits should be confirmed in the manufacturer datasheet before final circuit design.
Where can I download the SY89832UMI datasheet?
The SY89832UMI datasheet can be accessed through the manufacturer-linked documentation on its Microchip Technology product page or through the component's DigiKey product page. The available product listing identifies the device as a 1:4, 2.5 GHz LVDS fanout buffer in a 16-VFQFN exposed-pad package. Use the PDF pin description, electrical tables, and recommended layout diagrams when assigning pins and routing the PCB.
Where can I find the SY89832UMI pinout?
The SY89832UMI pinout is defined in the manufacturer's 16-VFQFN pin-description table. The package contains one differential clock input, four differential LVDS outputs, supply and ground connections, and an exposed thermal pad. Use the pin table and package drawing together when assigning functions so that supply, ground, and high-speed differential nets match the manufacturer footprint exactly.
Can the SY89832UMI distribute a 2.5 GHz differential clock?
The SY89832UMI is specified as a clock fanout buffer and translator operating up to 2.5 GHz. According to the Microchip Technology listing, it accepts a differential input and provides four differential LVDS outputs through a 1:4 fanout arrangement. Confirm output loading, trace length, insertion loss, and jitter performance in the target board environment before treating the clock as precision or low-jitter.
Does the SY89832UMI include input termination?
The SY89832UMI includes internal input termination, as stated in the Microchip Technology product description and the datasheet listing title. This feature simplifies the input network by avoiding a separate standard termination resistor where the device's specified termination configuration is appropriate. Verify the input architecture, termination value, and application topology against the manufacturer diagram before omitting external termination components.
What is the SY89832UMI package?
The SY89832UMI is supplied in a 16-VFQFN exposed-pad package. The exposed pad provides a low-impedance thermal and ground path when connected to the PCB ground plane as directed by the manufacturer layout. Because lead-free VFQFN assembly is sensitive to coplanarity and solder quality, use the package drawing's land pattern and the manufacturer's reflow profile during assembly.
What is the difference between the SY89832UMI and a single-ended clock buffer?
The SY89832UMI uses differential LVDS signaling to distribute one input clock to four differential outputs, whereas a conventional single-ended buffer produces outputs referenced to a single-ended logic level. Differential routing can improve noise immunity and reduce susceptibility to common-mode interference. The practical benefit depends on the clock frequency, trace impedance, return path, output loading, and the receiver's LVDS capabilities.
When should I choose the SY89832UMI instead of a one-output clock driver?
Choose the SY89832UMI when one differential source must feed four LVDS loads while retaining consistent edge timing and a compact 1:4 fanout topology. A one-output driver is preferable when only one branch is needed or when downstream circuitry already performs the required fanout. The decision should account for clock frequency, output loading, jitter, power distribution, and routing length.
Is the SY89832UMI suitable for an LVDS clock tree?
The SY89832UMI is suitable for a high-speed LVDS clock tree because it provides a 1:4 differential fanout, operation up to 2.5 GHz, and internal input termination. Place it near the clock source when four receiving branches need closely related launch points. Validate each branch's impedance, loss, loading, and return path, and account for skew when the downstream devices require tightly matched clock timing.
What is the best drop-in replacement for the SY89832UMI?
The best drop-in replacement must use the same 16-VFQFN footprint, preserve pin-to-pin signal assignments, support the same 2.5 V supply arrangement, and provide four differential LVDS outputs with comparable frequency capability. No alternative in the available cross-reference results meets all of these conditions with a documented footprint and parameter match. Treat any substitution as a new design requiring datasheet, layout, timing, and signal-integrity verification rather than an unqualified drop-in choice.
Can another Microchip clock buffer replace the SY89832UMI?
A Microchip clock buffer can replace the SY89832UMI only after its pinout, package, supply voltage, fanout ratio, logic standard, and high-speed performance match the existing board. Some Microchip SY89-series clock products use different packages or fanout configurations, so a similar family name does not establish drop-in compatibility. Obtain the exact manufacturer datasheet and perform a pin-by-pin comparison before releasing a replacement to production.
What is the best cross-brand equivalent for the SY89832UMI?
No cross-brand equivalent can be identified as a verified drop-in replacement from the available cross-reference information. A valid substitute would need a 16-VFQFN pin-compatible footprint, four LVDS outputs, internal termination, 2.5 V operation, and comparable performance at the intended clock frequency. Request a manufacturer cross-reference review and compare the complete electrical and timing tables before considering any second-source device.
Where can I buy SY89832UMI online?
Use the Request a Quote form on this page to ask about Microchip Technology SY89832UMI availability, order quantity, delivery timing, and the exact 16-VFQFN package. The form supports direct sourcing without embedding a static price or naming unrelated sellers. Include your target clock frequency, annual usage, shipment destination, and required traceability so the quote can reflect the correct production configuration.
How much does the SY89832UMI cost?
The SY89832UMI is priced through the Request a Quote form on this page because commercial terms can change with quantity, packaging, market conditions, and shipment requirements. Submit the manufacturer part number SY89832UMI, required quantity, and target delivery schedule. The structured quote process provides a current commercial response while avoiding a stale standalone price figure.
Is the SY89832UMI in stock and what is its lead time?
Current stock and production lead time for the SY89832UMI should be requested through the Request a Quote form on this page. Include the required quantity, reel or tray packaging preference, target date, and shipment destination. For production planning, also request date-code, lot traceability, and change-control details so the supplied devices can be qualified against your assembly schedule.

工程参考数据: SY89832UMI ——对比、设计指导和合规信息。

选型指南

Choose the SY89832UMI when a 2.5 V system requires one differential clock source to feed four LVDS destinations at frequencies up to 2.5 GHz. Its 1:4 fanout, internal input termination, and 16-VFQFN exposed-pad package make it particularly useful for compact, high-speed clock trees. The exposed pad supports low-inductance grounding and thermal transfer, provided the manufacturer footprint and via pattern are followed.

No drop-in alternative can be confirmed from the available cross-reference results, so a second source should not be assumed. For a replacement, first require the same 16-VFQFN footprint and pin-to-pin assignments, then compare supply voltage, LVDS levels, internal termination, output loading, propagation delay, jitter, and frequency capability. Similar SY89-series parts may use different packages or fanout configurations and may require PCB changes.

Choose the SY89832UMI rather than a single-output clock driver when four synchronized differential branches are needed from one source. Choose a discrete termination network instead of this device only when the application specifically requires external terminations. For any proposed substitute, validate timing, signal integrity, and assembly behavior rather than treating matching package dimensions as sufficient proof of interchangeability.

设计说明

Route the input and all four differential outputs as short, symmetric pairs over a continuous reference plane. Use the manufacturer-recommended differential impedance and geometry, keep vias symmetrical within each pair, and avoid crossing plane splits. Place the decoupling capacitor and exposed-pad vias at the device using the recommended layout pattern. These steps reduce return-path discontinuities, limit skew between outputs, and improve the probability of achieving the intended 2.5 GHz operating capability.

Treat the SY89832UMI as a high-speed transmission-line component rather than a conventional digital buffer. Match input and output pair lengths within the requirements of the receiving devices, maintain consistent spacing through the routing layer, and avoid long stubs. If branch lengths differ significantly, check timing skew and reflections in simulation. Internal input termination does not eliminate the need for controlled impedance or correct source-network implementation.

Use the manufacturer's specified 2.5 V supply arrangement and place local high-frequency bypass capacitance at the supply and ground pins. Connect the exposed pad to the ground plane with the prescribed via pattern to reduce inductance and provide thermal dissipation. Confirm the supply tolerance, current draw, and permissible operating range in the electrical tables. Estimated: actual power dissipation and junction rise cannot be calculated without confirmed current and ambient-temperature limits.

Do not substitute an LVDS clock device based only on fanout ratio or frequency. A valid replacement must also match the 16-VFQFN land pattern, pin assignments, supply voltage, differential I/O voltage, termination method, output loading, and timing behavior. Recheck any alternate part for receiver compatibility and edge-rate requirements. A footprint-compatible package is necessary but does not by itself prove that the replacement is electrically drop-in.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The component is described as a lead-free 16-VFQFN device by a distributor listing, but formal RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations require confirmation from Microchip Technology.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

SY89832UMI datasheet SY89832UMI pinout SY89832UMI datasheet pdf SY89832UMI equivalent SY89832UMI replacement SY89832UMI cross reference SY89832UMI footprint SY89832UMI price SY89832UMI stock Microchip SY89832UMI SY89832UMI LVDS clock buffer SY89832UMI application circuit

相关元器件 & 术语

Microchip Technology SY89832UMI SY89832U LVDS clock buffer clock translator clock fanout 1:4 fanout differential signaling low-voltage differential signaling internal termination 2.5 GHz 2.5 V clock distribution IC clock and timing IC semiconductor 16-VFQFN VFQFN package family exposed pad surface-mount package differential clock clock tree high-speed PCB routing continuous reference plane
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情