STMicroelectronics

TS393MDT - Micropower Dual Comparator | STMicroelectronics

料号: TS393MDT ✓ 量产中
18 V Vdss 9 µA Id 8-pin SOIC Package
最小起订量: 1 |

TS393MDT 概述

The STMicroelectronics TS393MDT is a micropower dual CMOS voltage comparator with two independent comparison channels, typically consuming 9 µA per comparator. The device accepts supply voltages up to 18 V, provides an input impedance of 10^12 Ω typical, and achieves a typical response time of 2.5 µs. It is packaged for surface-mount assembly in an 8-pin SOIC package, with the MDT ordering code identifying STMicroelectronics’ temperature-grade and delivery configuration.

A voltage comparator is an analog integrated circuit that compares an input voltage against a reference voltage and changes its output state when the relationship between them changes. The TS393MDT belongs to the comparator hierarchy within amplifier and signal-conditioning integrated circuits. Its dual-channel architecture allows two independent threshold decisions in one package, while its CMOS input stage provides very high impedance and draws minimal supply current for battery-powered and always-on equipment.

Key features include open-drain outputs, which permit wired-OR connection and operation with external pull-up resistors. The manufacturer describes the TS393 as compatible with the bipolar LM393 function while consuming approximately 20 times less current than the dual bipolar LM393. Its operating temperature range extends from -55 °C to 125 °C, making it suitable for industrial, automotive, and defense-related equipment when the complete system design and qualification requirements are satisfied.

The electrical characteristics support threshold sensing where low supply current, high input impedance, and moderate propagation speed are more important than nanosecond response. A 10^12 Ω typical input impedance minimizes loading of high-impedance sensor nodes, while the 2.5 µs typical response time allows the device to respond to slowly changing or moderate-frequency events. The open-drain architecture requires a pull-up resistor when a logic-high output is required, and careful attention should be paid to output-node capacitance, leakage, and pull-up resistor selection.

Typical applications include battery-powered monitoring circuits, industrial sensor interfaces, dual-threshold detection, window comparators, overvoltage and undervoltage supervision, and logic-level conversion between open-drain nodes. Two comparators in one package are especially useful when a compact design must monitor one signal against two limits or perform complementary decisions.

When laying out a board, place input and pull-up components close to the relevant pins, maintain a stable ground reference, and avoid long traces around high-impedance input nodes. Because the output is open drain, the effective rise time depends on the pull-up resistance and total output capacitance rather than solely on the comparator’s internal response time.

This product page combines the TS393MDT electrical characteristics, practical comparator design guidance, sourcing information, and a clearly qualified drop-in comparison with the bipolar LM393DT. It supports faster component selection by separating verified device facts from application-specific design considerations and replacement trade-offs.

直接替换替代料: TS393MDT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: TS393MDT (相同外形与封装尺寸) ——差异在于 Number of Channels, Output Type, Package, Response Time.

STMicroelectronics
Number of Channels: 2
Output Type: Open Collector
Package: SOIC-8
对比 TS393MDT →

LM393DT

✅ 直接替换
STMicroelectronics
📦 SOIC-8 (8-SOIC)
2 · 2 V to 36 V · ±1 V to ±18 V · 0.4 mA (typical) · 2 mV (typical) · 25 nA (typical) · 1.3 µs (typical) · Open Collector

✓ 有现货

$0.0461 / 个

查看数据手册 →

TS393MDT 最大额定值与电气特性

Comparator Type Dual general-purpose voltage comparator
Number of Channels 2 channels
Supply Voltage Maximum 18 V
Typical Supply Current per Comparator 9 µA
Input Impedance 10^12 Ω typical
Response Time 2.5 µs typical
Maximum Input Offset Voltage 6.5 mV
输出类型 Open-drain
Technology CMOS
Operating Temperature Minimum -55 °C
Operating Temperature Maximum 125 °C
封装 8-pin SOIC
安装类型 Surface mount
RoHS 状态 Compliant
Lead-Free Status Lead free
Compatibility Compatible with bipolar LM393 function

TS393MDT 8-pin soic 引脚配置指南

TS393MDT(8-pin soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

TS393MDT 的 8-pin soic 封装引脚图

暂无详细引脚数据: TS393MDT.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TS393MDT 适用于 6 应用s: Battery-Powered Threshold Monitoring, Industrial Sensor Interface, Overvoltage and Undervoltage Supervision, Dual Window Comparator, Open-Drain Logic Interface, Automotive and Heavy-Duty Condition Monitoring.

📱

Battery-Powered Threshold Monitoring

The TS393MDT fits battery-powered threshold detection because each CMOS comparator typically consumes only 9 µA, reducing standby demand in portable monitoring equipment. Two channels can independently compare a sensor signal with separate reference levels, allowing one compact package to provide upper- and lower-threshold decisions. The 10^12 Ω typical input impedance minimizes loading of high-impedance sensing nodes. Because the outputs are open drain, external pull-up resistors define the logic-high state and permit wired-OR operation when several detection events must share a common output node.

🏭

Industrial Sensor Interface

The TS393MDT is suitable for industrial sensor interfaces where a high-impedance input stage and extended temperature operation are valuable. Its 10^12 Ω typical input impedance reduces loading on resistive dividers, probe electrodes, and other high-source-impedance sensors. The -55 °C to 125 °C operating range covers demanding environmental conditions, while the 2.5 µs typical response time is suitable for many process-control and condition-monitoring signals. An open-drain output can drive a wired-OR alarm bus or a pulled-up logic input, although a pull-up must be selected with the bus capacitance and required rise time in mind.

⚡

Overvoltage and Undervoltage Supervision

The two independent TS393MDT channels can supervise one supply against an upper limit and a lower limit, eliminating the need for two separate comparator packages. Each channel provides an open-drain fault indication that can be pulled up and combined with another signal. The 9 µA typical consumption per comparator is valuable in always-on monitoring systems, while the 18 V maximum supply rating allows operation from higher-voltage rails when the individual input limits are respected. For power-supply designs, use the manufacturer’s electrical-characteristics table to confirm the allowed input and output states under every expected transient.

🔧

Dual Window Comparator

The TS393MDT can implement a compact window comparator by using one channel for the lower threshold and the other for the upper threshold. A monitored signal outside the acceptable range can then produce an open-drain fault indication. The device’s 10^12 Ω typical input impedance helps preserve accuracy when the sensing divider has a high source impedance, and its 2.5 µs typical response time provides rapid enough response for many slow-moving system variables. The output rise time is set by the external pull-up and bus capacitance, so the design should verify both comparator delay and output-network timing.

🖥️

Open-Drain Logic Interface

The TS393MDT can serve as a robust open-drain logic interface when a system must translate a variable analog level into a pulled-up digital fault signal. Its high input impedance reduces loading, and its dual-channel construction allows complementary or independent decisions. Open-drain outputs are useful for wired-OR buses because any output may pull the shared line low while all inactive outputs remain high-impedance. The external pull-up resistor should be selected to achieve the required rise time without exceeding the device’s output-current limits, and system timing should include the 2.5 µs typical internal response time.

🚗

Automotive and Heavy-Duty Condition Monitoring

The TS393MDT’s -55 °C to 125 °C operating range and dual open-drain outputs make it useful as a building block in heavy-duty condition-monitoring circuits. It can compare actuator, battery, or sensor signals and create a wired-OR diagnostic indication for a controller. The typical 9 µA consumption per comparator reduces continuous drain in always-connected systems. Automotive deployment still requires validation of the complete device qualification, electrical limits, transient immunity, and system safety requirements; the basic TS393MDT ordering code should not be treated as proof of a specific AEC-Q100 qualification.

推荐产品汇总

TS3702 Micropower dual comparator with push-pull outputs 用于: Battery-Powered Threshold Monitoring, Industrial Sensor Interface, Overvoltage and Undervoltage Supervision, Dual Window Comparator, Open-Drain Logic Interface, Automotive and Heavy-Duty Condition Monitoring LM393 Texas Instruments 用于: Battery-Powered Threshold Monitoring, Industrial Sensor Interface, Overvoltage and Undervoltage Supervision, Dual Window Comparator, Open-Drain Logic Interface, Automotive and Heavy-Duty Condition Monitoring
Where to buy TS393MDT online?
The TS393MDT can be requested through the Request a Quote form on this page. STMicroelectronics manufactures the device, and the exact TS393MDT ordering code should be entered when requesting supply. The manufacturer datasheet identifies the component as an 8-pin SOIC micropower dual comparator.
What is the price of TS393MDT?
Use the Request a Quote form on this page for the current commercial terms of the TS393MDT. Pricing and availability can vary with order quantity, delivery schedule, and market conditions. The manufacturer’s TS393 datasheet confirms that TS393MDT is the exact ordering code for the 8-pin SOIC device.
What is the lead time for TS393MDT?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on the requested quantity, manufacturing schedule, and delivery location. The verified product identification is STMicroelectronics TS393MDT in an 8-pin SOIC package.
Is TS393MDT in stock?
Use the Request a Quote form on this page to check current stock allocation for TS393MDT. The TS393MDT is listed as an active component with an 8-pin SOIC package, but production and distribution inventory should be confirmed against the requested quantity and delivery schedule.
What is the best drop-in replacement for TS393MDT?
The LM393DT is the closest identified drop-in alternative because it uses the 8-pin SOIC package, implements dual open-drain comparators, and is described by STMicroelectronics as the bipolar functional comparison point. The TS393MDT offers the key improvement of about 20 times lower typical consumption, with 9 µA per comparator.
Can LM393DT replace TS393MDT?
The LM393DT can replace the TS393MDT in many open-drain dual-comparator circuits because both use an 8-pin SOIC arrangement and provide two open-drain outputs. The electrical tradeoff is supply current: the TS393MDT uses about 9 µA per comparator and is characterized as consuming approximately 20 times less than the bipolar LM393.
TS393MDT vs LM393DT: which is better for a low-power sensor circuit?
The TS393MDT is generally better when battery life is the priority because its typical consumption is 9 µA per comparator, approximately 20 times lower than the bipolar LM393 class. LM393DT may be preferable when its longer-established supply ecosystem is more important than the TS393MDT’s micropower consumption.
When should I choose TS393MDT over LM393DT?
Choose the TS393MDT when low quiescent current is central to the design, particularly in portable, energy-harvesting, or long-duration monitoring systems. Its typical current is 9 µA per comparator and the manufacturer characterizes it as consuming about 20 times less than the bipolar LM393 while retaining an open-drain dual-comparator function.
Is TS393MDT suitable for industrial sensor interfaces?
The TS393MDT is suitable for many industrial sensor-interface circuits because it provides a 10^12 Ω typical input impedance, a 2.5 µs typical response time, and an operating temperature range of -55 °C to 125 °C. The open-drain output supports wired-OR sensing when paired with suitable pull-up resistors.
What are the key specifications of TS393MDT that engineers should know?
The TS393MDT is a dual CMOS, open-drain voltage comparator in an 8-pin SOIC package. According to the STMicroelectronics manufacturer datasheet, important values include 9 µA typical supply current per comparator, 10^12 Ω typical input impedance, 2.5 µs typical response time, an 18 V maximum supply voltage, and operation from -55 °C to 125 °C.
What can replace TS393MDT?
The identified replacement is LM393DT, a dual open-drain comparator in the same 8-pin SOIC package. It is a functional alternative, but it is not electrically identical: the TS393MDT consumes about 9 µA per comparator and is characterized as roughly 20 times more power efficient than the bipolar LM393.
Is TS393MDT the same as LM393DT?
No, the TS393MDT and LM393DT are not electrically identical. They share a dual open-drain comparator format and 8-pin SOIC package, but the TS393MDT uses CMOS circuitry with about 9 µA typical consumption per comparator, while the LM393DT is a bipolar comparator with substantially higher current consumption.
What is the best Texas Instruments equivalent for TS393MDT?
No Texas Instruments equivalent was identified in the available cross-reference material for the TS393MDT, so a specific replacement cannot be recommended without risking an unverified pinout or electrical mismatch. The LM393DT is the identified cross-brand functional alternative, and any final substitution should be checked against the TS393MDT pin description and application requirements.
Where to download the TS393MDT datasheet PDF?
The official STMicroelectronics TS393 datasheet PDF is available at the manufacturer link on this page. It is the primary document for the TS393MDT electrical characteristics, pin description, recommended operating conditions, and application information. The exact ordering code appears as TS393MDT within the manufacturer’s ordering information.
Where can I find the TS393MDT pinout?
Use the pin-description table in the official STMicroelectronics TS393 manufacturer datasheet to assign PCB tracks for TS393MDT. The device is packaged as an 8-pin SOIC and contains two open-drain comparator channels. Do not infer an exposed pad or additional thermal connection because the package description identifies a standard 8-pin SOIC.

工程参考数据: TS393MDT ——对比、设计指导和合规信息。

选型指南

Choose the TS393MDT when a dual open-drain comparator is needed in a low-power design. Its typical 9 µA consumption per comparator is the principal advantage over the bipolar LM393DT, making it attractive for battery-powered equipment, always-on sensing, and energy-limited monitoring systems. Its 10^12 Ω typical input impedance is also useful when the signal source is high impedance, and the 2.5 µs typical response time is appropriate for most non-high-speed threshold decisions. The LM393DT remains the relevant cross-brand drop-in option when its established electrical behavior is preferred or when the higher bipolar supply current is acceptable. TS3702 is useful for low-power designs needing push-pull outputs, but its different output architecture prevents treating it as a transparent open-drain replacement. Before substitution, verify pin functions, input common-mode limits, output-current limits, pull-up behavior, temperature grade, and the exact package footprint.

与替代料对比

参数 本产品 LM393DT
Brand STMicroelectronics Texas Instruments
Package SOIC-8 (8-SOIC) SOIC-8 (8-SOIC)
Comparator Configuration Dual Dual
Output Type Open drain Open drain
Input Stage Technology CMOS Bipolar

关键差异点

  • Lower typical comparator supply current (对比 LM393DT)
  • Very high input impedance for high-impedance sensing (对比 LM393DT)
  • Compact dual open-drain channel in an 8-pin SOIC (对比 LM393DT)
  • Wide specified operating-temperature range (对比 LM393DT)

设计说明

Route the two comparison inputs directly to their sensing sources and keep them away from the open-drain output and pull-up network. The TS393MDT has a 10^12 Ω typical input impedance, but high-impedance traces can still accumulate leakage and coupling. Place input and output components near their associated pins, keep the comparator ground path short, and use a continuous ground reference to minimize threshold shifts.

An open-drain output does not actively drive a logic-high voltage; it only pulls the node low or releases it. Select the external pull-up using the required logic-high level, total bus capacitance, desired rise time, and output-current limits. Also account for the 2.5 µs typical response time and the pull-up-generated rise time when defining system alarm latency.

Estimated: with both comparators operating, the typical supply consumption based on 9 µA per comparator is 18 µA, excluding output pull-up current and input bias effects. Confirm the actual supply demand across temperature and process conditions using the manufacturer electrical characteristics. A pull-up resistor continuously dissipates current whenever an output is low, so its value may dominate the total standby power of the circuit.

Use the TS393MDT for signals that can be handled by its 2.5 µs typical response time rather than requiring high-speed edge detection. If the monitored input can slew rapidly, verify total propagation delay, input overdrive, and output rise time at the intended supply voltage. Slow output edges caused by excessive pull-up resistance and bus capacitance may create timing problems even when the comparator’s internal response time is acceptable.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

The distributor product record identifies the TS393MDT as lead free and RoHS compliant. No separate REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was established.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

TS393MDT datasheet TS393MDT pinout TS393MDT datasheet pdf TS393MDT specifications TS393MDT equivalent TS393MDT replacement TS393MDT cross reference TS393MDT vs LM393DT TS393MDT price TS393MDT stock STMicroelectronics TS393MDT TS393MDT SOIC-8 comparator TS393MDT open drain output TS393MDT application circuit

相关元器件 & 术语

STMicroelectronics TS393MDT TS393 LM393DT Texas Instruments TS3702 dual voltage comparator comparator IC analog comparator signal-conditioning integrated circuit CMOS open-drain output bipolar LM393 input impedance supply current response time input offset voltage threshold detection wired-OR window comparator SOIC-8 surface mount RoHS battery-powered monitoring
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情