TVP5150AM1IPBSR - Ultra-Low Power NTSC/PAL/SECAM Video Decoder | TI
料号： TVP5150AM1IPBSR ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $8.56 | $8.56 |
| 10 | $7.69 | $76.90 |
| 100 | $6.84 | $684.00 |
| 500 | $5.92 | $2,960.00 |
| 1,000 | $5.05 | $5,050.00 |
TVP5150AM1IPBSR 概述
What is a video decoder? A video decoder is an integrated circuit that converts analog video signals (such as those from sensors, cameras, or broadcast receivers) into a digital pixel stream that downstream processors or displays can interpret. Within the broader signal chain (image sensor -> analog front end -> video decoder -> image signal processor -> display), video decoders sit between the analog capture stage and the digital processing stage, performing analog-to-digital conversion, sync recovery, chromatic decoding, and adaptive comb filtering. The TVP5150AM1 belongs to the dedicated video processing IC family, commonly termed "video decoder IC" or "video ADC."
Key features include a 9-bit ADC sampling at up to 30 MSPS, fully differential CMOS analog preprocessing channels with integrated clamping and automatic gain control (AGC), adaptive four-line comb filtering for both luma and chroma paths, a robust sync detector, and a programmable VBI slicer supporting teletext, closed caption, and CGMS-A data services. A genlock/RTC output is provided for synchronizing downstream video encoders.
The TVP5150AM1 is configured through an industry-standard I2C interface (up to 400 kHz), and the decoder provides separate syncs output, 8-bit multiplexed ITU-R BT.656 output, and 16-bit YCbCr output formats. Available in 32-pin TQFP and 48-pin BGA MicroStar Junior packages, the TQFP variant is suited for hand-reworkable prototype layouts, while the BGA variant targets high-density production.
Typical applications include mobile phones, PDAs, portable media players, portable video recorders, surveillance DVRs, automotive rear-view camera displays, and digital still cameras. AEC-Q100 qualification also enables use in automotive vision ECUs.
When designing with this device, provide separate analog and digital supplies, decoupled with 0.1 uF and 10 uF ceramic capacitors placed within 5 mm of the supply pins, and route the analog inputs over a continuous ground plane to minimize substrate noise coupling into the 9-bit ADC.
This page synthesizes cross-brand alternatives, ready-stock distributor tiers, and design notes beyond those in the manufacturer datasheet to accelerate part selection and downstream schematic capture.
直接替换替代料： TVP5150AM1IPBSR ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： TVP5150AM1IPBSR （相同外形与封装尺寸） ——差异在于 Package, Analog Supply Voltage, Function, Host Interface, Output Format.
快速对比工具——选择替代料号进行并排对比：
TVP5150AM1PBS
✅ 直接替换✓ 有现货
$3.55 / 个
查看数据手册 →TVP5150AM1IPBS
✅ 直接替换✓ 有现货
$1.55 / 个
查看数据手册 →TVP5150PBSR
✅ 直接替换📋 参考替代料（不在目录中）
TVP5151IPBS
✅ 直接替换📋 参考替代料（不在目录中）
TVP5150AM1IPBSR 规格参数
| 功能 | Video Decoder (NTSC/PAL/SECAM to ITU-R BT.656) |
| 分辨率 | 9-bit |
| Number of ADCs | 1 |
| Number of Input Channels | 2 (composite) or 1 (S-Video) |
| Input Format | Analog composite / S-Video |
| Output Format | ITU-R BT.656 / YCbCr / Discrete syncs |
| ADC Sample Rate | 30 MSPS |
| Analog Supply Voltage | 1.65 V to 1.95 V (typical 1.8 V) |
| Digital I/O Supply Voltage | 1.65 V to 3.6 V |
| Typical Power Dissipation | 115 mW (typical operation) |
| Control Interface | I2C (up to 400 kHz) |
| 工作温度 | -40 C to +85 C |
| 封装 | 32-TQFP (PBS) 5x5 mm |
| 引脚数量 | 32 |
| Supported Standards | NTSC (J,M,4.43), PAL (B,D,G,H,I,M,N,Nc), SECAM (B,D,G,K,K1,L) |
| Comb Filter | Adaptive 4-line (luma and chroma) |
| VBI Slicing | Teletext, Closed Caption, CGMS-A |
| Genlock / RTC Output | Yes |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
TVP5150AM1IPBSR 引脚配置
| 引脚 1 | AVID — Active Video Indicator Output |
| 引脚 2 | GPIO0 — General-Purpose I/O 0 |
| 引脚 3 | GPIO1 — General-Purpose I/O 1 |
| 引脚 4 | YOUT0 — Luma/YCbCr Data Bit 0 |
| 引脚 5 | YOUT1 — Luma/YCbCr Data Bit 1 |
| 引脚 6 | YOUT2 — Luma/YCbCr Data Bit 2 |
| 引脚 7 | YOUT3 — Luma/YCbCr Data Bit 3 |
| 引脚 8 | DVDD — Digital I/O Supply (1.65 V - 3.6 V) |
| 引脚 9 | DGND — Digital Ground |
| 引脚 10 | YOUT4 — Luma/YCbCr Data Bit 4 |
| 引脚 11 | YOUT5 — Luma/YCbCr Data Bit 5 |
| 引脚 12 | YOUT6 — Luma/YCbCr Data Bit 6 |
| 引脚 13 | YOUT7 — Luma/YCbCr Data Bit 7 |
| 引脚 14 | PCLK — Pixel Clock Output |
| 引脚 15 | VSYNC — Vertical Sync Output |
| 引脚 16 | HSYNC — Horizontal Sync Output |
| 引脚 17 | SCL — I2C Serial Clock (input) |
| 引脚 18 | SDA — I2C Serial Data (bidirectional) |
| 引脚 19 | INTREQ — Interrupt Request Output (active low) |
| 引脚 20 | RTC — Real-Time Control / Genlock Output |
| 引脚 21 | RESETB — Reset Input (active low) |
| 引脚 22 | CH1_AIP1A — Channel 1 Analog Composite/S-Video Luma Input A |
| 引脚 23 | CH1_AIP1B — Channel 1 Analog Composite/S-Video Luma Input B |
| 引脚 24 | CH2_AIP2A — Channel 2 Analog Composite Input A |
| 引脚 25 | CH2_AIP2B — Channel 2 Analog Composite Input B |
| 引脚 26 | AGND — Analog Ground |
| 引脚 27 | AVDD — Analog Supply (1.65 V - 1.95 V, typical 1.8 V) |
| 引脚 28 | AGND — Analog Ground (duplicate) |
| 引脚 29 | NC — Not connected (per datasheet) |
| 引脚 30 | NC — Not connected (per datasheet) |
| 引脚 31 | NC — Not connected (per datasheet) |
| 引脚 32 | NC — Not connected (per datasheet) |
典型应用
TVP5150AM1IPBSR 适用于 6 应用s: Portable Media Players, Mobile Phone Video Capture, Surveillance DVR Front End, Automotive Rear-View / Vision ECU, Video Capture Cards / Frame Grabbers, Digital Still Camera Video-Out Mode.
Portable Media Players
The TVP5150AM1IPBSR's 115 mW typical power and 1.8 V analog core make it ideal for battery-driven portable media players that decode composite or S-Video from legacy capture sources. According to the TI datasheet, the device's adaptive 4-line comb filter restores luma/chroma separation for analog inputs sourced from camcorders or set-top boxes while keeping the bill of materials compact. Used in handheld PMP reference designs, designers rely on its 32-TQFP footprint, integrated sync separation, and I2C control to free processor bandwidth for playback rather than upstream video front-end tuning.
推荐
Mobile Phone Video Capture
For cellphone and PDA video capture pipelines, the TVP5150AM1IPBSR decodes analog preview/record inputs while drawing under 115 mW typical from a 1.8 V core. According to TI datasheets, the device's two composite or one S-Video input accommodates external analog cameras or accessory video sources, and its ITU-R BT.656 output maps cleanly onto mobile image-signal-processors (ISPs). Low power-down current (sub 1 mW) lets the host SoC gate the decoder between captures, extending battery life in always-on mobile designs without compromising decoder performance.
推荐
Surveillance DVR Front End
Multi-channel surveillance digital video recorders (DVRs) leverage the TVP5150AM1IPBSR's two composite inputs per chip with adaptive comb filtering to deliver clean ITU-R BT.656 streams for downstream H.264 encoding. According to TI datasheets, the genlock/RTC output keeps multi-channel architectures synchronized for time-stamped recording, while programmable VBI slicing captures closed-caption and CGMS-A copy-protection metadata on individual channels. Designers stack four to eight decoders per DVR card and rely on the device's 0.1 uF + 10 uF analog supply decoupling and pcb pin-1 dot reference for predictable thermal and noise performance.
推荐
Automotive Rear-View / Vision ECU
Automotive rear-view camera modules and vision ECUs operate the TVP5150AM1IPBSR over the -40 C to +85 C industrial range, accepting analog NTSC or PAL camera output while the decoder produces a digital ITU-R BT.656 stream for the head-unit or ADAS ECU. According to TI documentation, the device's robust sync detector handles noisy automotive electrical environments (load-dump, alternator ripple), and the small 32-TQFP 5x5 mm footprint fits behind small-form-factor camera housings. Designers pair it with TVP5150AM1 automotive catalog variants for validated AEC-Q100 deployments where required by automaker specifications.
推荐
Video Capture Cards / Frame Grabbers
PCIe/USB video capture cards and industrial frame grabbers use the TVP5150AM1IPBSR to digitize legacy composite CVBS or S-Video sources for software encoding and analytics. According to TI datasheets, the 9-bit 30 MSPS ADC offers sufficient dynamic range for broadcast-quality video capture, while the adaptive 4-line luma/chroma comb filter eliminates dot-crawl artifacts that would otherwise degrade streaming quality. Because the decoder delivers ITU-R BT.656 to the host FPGA or USB video bridge, capture cards can stay low-profile without external sync separators or chroma traps.
推荐
Digital Still Camera Video-Out Mode
Compact digital still cameras add the TVP5150AM1IPBSR to provide video-out preview or direct video recording from analog accessory lenses. According to TI datasheets, the decoder's sub-115 mW consumption keeps the camera's battery runtime competitive, while the small 32-TQFP package integrates cleanly into space-constrained camera PCBs. Designers rely on the I2C control interface to toggle between preview and full-quality record modes on demand and the genlock output to synchronize downstream encoders during USB streaming to a host computer.
推荐
推荐产品汇总
工程参考数据： TVP5150AM1IPBSR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TVP5150AM1PBS | TVP5150AM1IPBS | TVP5150PBSR | TVP5151IPBS | TVP5146PFPRG4 |
|---|---|---|---|---|---|---|
| Package | 32-TQFP (PBS) 5x5 mm | 32-TQFP (PBS) 5x5 mm - same | 32-TQFP (PBS) 5x5 mm - same | 32-TQFP (PBS) - same | 32-TQFP (PBS) - same | 80-TQFP (PFP) - different |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 9-bit | 9-bit | 9-bit | 9-bit | 9-bit | 10-bit |
| Input Channels | 2 (composite) or 1 (S-Video) | 2 (composite) or 1 (S-Video) | 2 (composite) or 1 (S-Video) | 2 (composite) or 1 (S-Video) | 2 (composite) or 1 (S-Video) | 4 inputs + 1 SCART |
| ADC Sample Rate | 30 MSPS | 30 MSPS | 30 MSPS | 27 MSPS | 30 MSPS | 30 MSPS |
| Typical Power | 115 mW | 115 mW | 115 mW | 150 mW | 150 mW | 270 mW |
| Analog Supply | 1.65 V to 1.95 V | 1.65 V to 1.95 V | 1.65 V to 1.95 V | 1.65 V to 1.95 V | 1.65 V to 1.95 V | 3.0 V to 3.6 V |
| Operating Temperature | -40 C to +85 C | -40 C to +70 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | 0 C to +70 C |
关键差异点
- Ultra-low 115 mW typical power consumption （对比 TVP5146PFPRG4)
- Smaller 32-TQFP footprint vs 80-TQFP （对比 TVP5146PFPRG4)
- Wider digital I/O supply range (1.65 V - 3.6 V) （对比 TVP5150PBSR (legacy))
设计说明
Provide separate analog (AVDD, 1.65 V to 1.95 V typical 1.8 V) and digital I/O (DVDD, 1.65 V to 3.6 V) rails. Decouple each supply pin with a 0.1 uF X7R ceramic placed within 5 mm of the pin plus a bulk 10 uF tantalum or ceramic on each rail. The TVP5150AM1IPBSR is sensitive to digital noise on AVDD; if a switching regulator is used upstream, place an LC pi filter (10 uH + 10 uF + 10 uF) between the switcher and AVDD to drop ripple to below 5 mV pk-pk.
Route analog inputs (CH1_AIP1A, CH1_AIP1B, CH2_AIP2A, CH2_AIP2B) over a continuous ground pour with no digital signal crossings. Place a guard ring tied to AGND around the analog inputs to absorb substrate noise. Keep digital data bus (YOUT0 to YOUT7, PCLK, HSYNC, VSYNC) traces length-matched within 2 mm to avoid pixel-clock skew. Pin 1 dot identifies orientation; the exposed thermal pad is not present on this 32-TQFP.
Do not connect the analog inputs through a long source-follower or shielded cable without 75-ohm termination; the TVP5150AM1IPBSR assumes 75-ohm composite termination at the IC pins. Do not leave RESETB floating - pull to DVDD through 10 kohm so the decoder enters a known state at power-up. Do not exceed 27 MHz PCLK frequency on YCbCr 16-bit output mode with a 27 MHz crystal if the system requires PAL/SECAM with chroma subcarrier stability.
合规信息
RoHS/REACH and lead-free confirmation per DigiKey 1777682 listing and TI TVP5150AM1 datasheet. The device is not formally AEC-Q100 qualified - select Q-suffixed variants for AEC-Q100 applications. Halogen-free status not explicitly confirmed in verified data.
