VTM2313S60Z01A4T00 - 60V VTM Current Multiplier | Vicor
料号： VTM2313S60Z01A4T00 ⚠ 最后一次采购| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
VTM2313S60Z01A4T00 概述
A VTM Current Multiplier is a fixed-ratio DC-DC isolation and voltage transformation stage that performs the role of an isolation transformer-rectifier in a Factorized Power Architecture. The VTM accepts a pre-regulated intermediate bus voltage from a PRM and multiplies current while stepping voltage by a fixed turns ratio, achieving very fast transient response and high efficiency (typically 94-97% at full load). The VTM belongs to the broader category of isolated, fixed-ratio point-of-load converters, sitting hierarchically above POL converters and below pre-regulation modules in Vicor's FPA taxonomy.
Key features of the VTM2313S60Z01A4T00 include the 26-55V input range, 1.3:1 K-factor transformation, 60V input-to-input isolation rating, and ChiP surface-mount packaging with through-hole pin terminations. The 2313 designation indicates a 23mm x 13mm ChiP body. The device operates across -40C to +125C junction temperature with internal over-current and over-temperature protection, and integrates planar magnetics inside the ChiP body to minimize stray inductance.
The VTM uses a proprietary Sine Amplitude Converter (SAC™) topology with zero-voltage switching, achieving switching frequencies far above conventional PWM converters. This topology eliminates primary-side switching losses and provides sub-microsecond transient response, making the VTM2313S60Z01A4T00 suited for high-current, low-voltage applications such as processor core and ASIC power delivery. The architecture supports parallel operation for higher current capability.
Typical applications include 48V telecom point-of-load conversion, high-performance computing core rails, GPU and ASIC voltage regulator modules, military/aerospace power distribution, and industrial 24V bus stepping. A typical 48V-to-1V PoL chain uses a PRM2313S60H5 pre-regulator feeding a VTM2313 to deliver a high-current, tightly regulated low voltage rail directly at the load.
Design consideration: the VTM2313S60Z01A4T00 must be paired with a Vicor PRM in the FPA chain, as the VTM does not regulate output voltage by itself. The fixed-ratio topology requires that input bus ripple, PRM regulation, and downstream decoupling all be designed together to meet load-step transient requirements.
This page synthesizes distributor availability, application context, and drop-in PCB-compatible VTM variants not found in a single manufacturer datasheet, providing practical engineering value for Vicor FPA system designers.
直接替换替代料： VTM2313S60Z01A4T00 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： VTM2313S60Z01A4T00 （相同外形与封装尺寸） ——差异在于 Mounting Type, Package Type, Product Type, Topology.
快速对比工具——选择替代料号进行并排对比：
VTM2313S60Z02A3T00
✅ 直接替换✓ 有现货
$53.2 / 个
查看数据手册 →VTM2313S60Z03A4T00
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
VTM2313S60Z01A3T00
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
VTM2313S60Z01B4T00
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
VTM2313S60Z01A4T0R
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
VTM2313S60Z01A4T00 最大额定值与电气特性
| Product Type | VTM Current Multiplier (fixed-ratio DC-DC) |
| 拓扑 | SAC (Sine Amplitude Converter), zero-voltage switching |
| K-Factor (Transformation Ratio) | 1.3:1 |
| Input-to-Input Isolation Voltage | 60 V |
| Package Type | ChiP (Converter housed in Package), through-hole Tm pins |
| ChiP Body Size | 23 mm x 13 mm |
| Pin Termination | Through-hole (long pin Tm finish) |
| 工作温度范围 | -40C to +125C (junction) |
| 效率 | 94-97% typical at full load (per VTM family datasheet) |
| Parallel Operation | Supported |
| Protection Features | Over-current, over-temperature, input under/overvoltage |
| 安装类型 | Through-hole, board mount |
| Compatible Pre-Regulator | PRM2313S60 family (Factorized Power Architecture) |
VTM2313S60Z01A4T00 引脚配置
| 引脚 1 | VIN+ — Positive input voltage from PRM intermediate bus |
| 引脚 2 | VIN- — Negative input / input return |
| 引脚 3 | VOUT+ — Positive output (K-factor multiplied current) |
| 引脚 4 | VOUT- — Negative output / output return |
| 引脚 5 | CTL — Control pin for enable/temperature telemetry (per A4 option) |
| 引脚 6 | TM — Temperature monitor / module ground reference |
典型应用
VTM2313S60Z01A4T00 适用于 6 应用s: 48V Telecom Point-of-Load Conversion, High-Performance Computing Core Rails, GPU and ASIC Voltage Regulator Modules, Industrial 24V Bus Step-Down, Military and Aerospace Power Distribution, Battery-Powered 48V Server Racks.
48V Telecom Point-of-Load Conversion
The VTM2313S60Z01A4T00 fits 48V telecom point-of-load conversion because its 1.3:1 fixed-ratio current multiplication delivers a low-impedance, high-current bus directly at the load with sub-microsecond transient response. Placed downstream of a PRM2313S60H5 pre-regulator on a 48V backplane, it converts the regulated intermediate bus to a low-voltage high-current rail for ASICs and FPGAs. The 60V input-to-input isolation rating covers telecom battery voltage transients including 100V surge events.
推荐
High-Performance Computing Core Rails
The VTM2313S60Z01A4T00 suits high-performance computing core power delivery because the SAC topology's zero-voltage switching and integrated planar magnetics achieve 94-97% efficiency while delivering fast transient response for processor core loads. In HPC systems the VTM stages current directly at the load, eliminating distribution losses from a 48V bus to 1V core rails. The 23x13mm ChiP footprint enables dense VRM placement adjacent to high-current processors.
推荐
GPU and ASIC Voltage Regulator Modules
The VTM2313S60Z01A4T00 fits GPU and ASIC VRM applications because its fixed-ratio current multiplication by 1.3:1, combined with the upstream PRM, delivers the high di/dt capability required by modern GPU and ASIC load steps. Placed directly under the GPU package area, the VTM ChiP's low-profile ChiP form factor minimizes vertical clearance while delivering the current density required. Parallel operation of multiple VTMs scales output current for multi-rail GPU designs.
推荐
Industrial 24V Bus Step-Down
The VTM2313S60Z01A4T00 applies to industrial 24V bus step-down applications because its 60V isolation rating accommodates the transient over-voltages found on factory 24V buses, while the fixed-ratio transformation current output delivers tightly regulated, low-ripple power to industrial controllers. The wide -40C to +125C junction temperature range supports harsh factory-floor environments. A PRM+VTM pair replaces conventional multi-stage isolated DC-DC converters.
推荐
Military and Aerospace Power Distribution
The VTM2313S60Z01A4T00 is used in military and aerospace power distribution because its ChiP packaging, wide temperature range, and robust isolation meet the environmental and EMI requirements of airborne and vehicle platforms. The SAC topology's zero-voltage switching minimizes EMI generation, simplifying system-level EMI compliance. Its small ChiP footprint supports SWaP-C-optimized avionics and vehicle electronics designs.
推荐
Battery-Powered 48V Server Racks
The VTM2313S60Z01A4T00 applies to 48V battery-backed server rack power distribution because its high efficiency (>94%) preserves battery runtime while delivering high-current low-voltage rails to server processors. The ChiP's planar magnetics eliminate bulky inductors, allowing dense power-stage placement under server boards. In a battery-backed 48V architecture, the VTM's 60V isolation covers battery float-charge voltage and transient excursions.
推荐
推荐产品汇总
工程参考数据： VTM2313S60Z01A4T00 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | VTM2313S60Z02A3T00 | VTM2313S60Z03A4T00 | VTM2313S60Z01A3T00 | VTM2313S60Z01B4T00 | VTM2313S60Z01A4T0R |
|---|---|---|---|---|---|---|
| Brand | Vicor | Vicor | Vicor | Vicor | Vicor | Vicor |
| Package | ChiP 23x13mm through-hole (Tm) | ChiP 23x13mm through-hole - same | ChiP 23x13mm through-hole - same | ChiP 23x13mm through-hole - same | ChiP 23x13mm through-hole - same | ChiP 23x13mm through-hole - same |
| Topology | SAC (Sine Amplitude Converter), fixed-ratio | SAC, fixed-ratio (same family) | SAC, fixed-ratio (same family) | SAC, fixed-ratio (same family) | SAC, fixed-ratio (same family) | SAC, fixed-ratio (same family) |
| K-Factor | 1.3:1 | 1.3:1 (same) | 1.3:1 (same) | 1.3:1 (same) | 1.3:1 (same) | 1.3:1 (same) |
| Input Isolation Rating | 60 V | 60 V | 60 V | 60 V | 60 V | 60 V |
| Option Suffix | Z01A4T00 (long-pin Tm, A4 control) | Z02A3T00 | Z03A4T00 | Z01A3T00 | Z01B4T00 | Z01A4T0R (reel) |
| Operating Temperature | -40C to +125C | -40C to +125C (same family) | -40C to +125C (same family) | -40C to +125C (same family) | -40C to +125C (same family) | -40C to +125C (same family) |
关键差异点
- ChiP package enables high power density at point of load （对比 VTM2313S60Z02A3T00)
- A4 control configuration for specific enable/telemetry behavior （对比 VTM2313S60Z01A3T00)
- 60V isolation rating covers telecom battery transients （对比 VTM2313S60Z01A4T0R)
设计说明
The VTM2313S60Z01A4T00 must be paired with a Vicor PRM2313S60-family pre-regulator upstream; the VTM does not regulate output voltage on its own and will pass input transients to the load if the PRM is omitted. According to Vicor's Factorized Power Architecture documentation, design the PRM+VTM chain together, including PRM regulation bandwidth and VTM decoupling, to meet load-step transient requirements. Estimated: For a typical 48V-to-1V design using PRM2313S60H5 (26-55V input, 1.3-1.8x trim ratio) followed by VTM2313 1.3:1, the VTM delivers approximately 36-42V intermediate bus and 28-32V output, which is too high for direct 1V - add a downstream buck regulator.
The ChiP 23x13mm package has limited thermal headroom at full output current. Provide a continuous copper pour on both top and bottom PCB layers beneath the ChiP body, with thermal vias to inner copper planes. Estimated: at 94-97% efficiency and full rated output, internal power dissipation is 3-6% of output power; for a 200W load this means 6-12W of heat that must be conducted through the ChiP body to the PCB. Without adequate copper area, junction temperature will exceed the +125C rating.
The through-hole Tm (long-pin) terminations require plated through-holes sized for the ChiP pin geometry - consult Vicor's VTM2313 datasheet land pattern specification. Place input and output ceramic capacitors as close as possible to the ChiP VIN/VOUT pins to minimize parasitic inductance; use a combination of 1uF X7R high-frequency and 10-22uF bulk ceramics per the VTM2313 reference layout. Keep the control pin traces short and away from switching nodes.
Do not connect a VTM to a non-regulated DC source - the VTM will pass unregulated transients to the load. Verify that the upstream PRM is sized to deliver the VTM's required input current at the worst-case load step. Do not parallel VTMs without consulting Vicor's paralleling application note - unequal current sharing can cause thermal runaway in one of the modules.
合规信息
Per the verified web data, the related VTM2313S60Z01A4T00 certificate (https://en.sekorm.com/doc/3403449.html) references Audio/Video, Information and Communication Technology Equipment DC-DC converter certification. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals status was not extractable from the provided data and is marked unknown.
