Nuvoton Technology Corporation

W78E051C40DL - 40MHz 8-Bit 8051 MCU | Nuvoton

料号: W78E051C40DL ✓ 量产中
40-DIP Package 40 MHz Speed 4 KB (4K x 8) Memory
最小起订量: 1 |

W78E051C40DL 概述

Nuvoton Technology Corporation W78E051C40DL is an 8-bit W78 8051-compatible microcontroller operating up to 40 MHz, with 4 KB (4K x 8) flash program memory, 128 bytes of RAM, and 32 I/O pins in a 40-pin DIP package. The device combines a compact 8051 instruction-set architecture with integrated flash memory for embedded control applications that require deterministic operation and a modest memory footprint.

An 8051-compatible microcontroller is an embedded processing IC designed to execute firmware for peripheral control, signal acquisition, logic sequencing, and communication tasks. Within the product hierarchy, it is a microcontroller, an embedded processing IC, and a semiconductor. The W78E051C family combines the established 8051 programming model with faster execution, flash program storage, and a broad selection of general-purpose I/O for cost-sensitive embedded products.

The principal device characteristics include a 40 MHz operating speed, 4 KB of flash program memory, 128 bytes of RAM, and 32 I/O pins. Flash memory retains its programmed contents when power is removed, eliminating the need for a separate external program-memory device in systems whose firmware fits within 4 KB. The 32 I/O pins provide interfaces for switches, sensors, indicator devices, relays, displays, and other digital peripherals.

The W78E051C architecture is intended for compact embedded control rather than high-throughput processing. Its 8051-compatible software environment allows existing 8051 code and development practices to be reused when an application can be implemented within the available 4 KB flash and 128-byte RAM limits. The 40 MHz clock rating also provides more timing margin than legacy 8051 derivatives operating at substantially lower frequencies.

Typical applications include appliance controllers, small motor-control boards, temperature-sensing instruments, digital timers, LED indicators, key scanners, general-purpose industrial controllers, and embedded products with several digital input and output functions. The 40-pin DIP format is particularly suitable for through-hole prototyping, educational systems, and controller assemblies where manual insertion and straightforward inspection are useful.

Designers should verify the pinout, oscillator configuration, reset behavior, supply limits, and programming procedure against the manufacturer datasheet before finalizing a PCB. Because program memory and RAM are limited, firmware architecture should minimize large tables and deeply nested call chains. A conservative prototype strategy is to reserve code space for diagnostics and leave the external I/O pins unused until their electrical functions are confirmed.

This page organizes the core W78E051C40DL specifications, practical application guidance, package considerations, and design checks into one engineering-focused reference. It also distinguishes directly documented device characteristics from electrical details that still require confirmation from the official W78E51C/W78E051C datasheet.

直接替换替代料: W78E051C40DL ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: W78E051C40DL (相同外形与封装尺寸) ——差异在于 Number of I/O Pins, Product Type, Program Memory Size.

Nuvoton Technology Corporation
对比 W78E051C40DL →
Nuvoton Technology Corporation
Number of I/O Pins: 32 pins
Product Type: 8-bit microcontroller
Program Memory Size: 8 KB Flash
对比 W78E051C40DL →

W78E052C40DL

✅ 直接替换
Nuvoton Technology Corporation
📦 40-pin DIP
8-bit microcontroller · Nuvoton Technology Corporation · Winbond W78E052C · 8051-compatible 8-bit core · 40 MHz · 8 KB Flash · 8K x 8 bits · 32 pins

联系询价

查看数据手册 →

W78E51B-40

✅ 直接替换
📦 40-pin DIP
Lower-memory W78E51B family member at the same 40 MHz class; program-memory capacity is reduced relative to the 4 KB target

📋 参考替代料(不在目录中)

W78E51B-24

✅ 直接替换
📦 40-pin DIP
Uses the 24 MHz designator rather than 40 MHz, a 40% clock-rate reduction, while sharing the related 40-pin DIP W78E51B package

📋 参考替代料(不在目录中)

W78E051B-40

✅ 直接替换 ⚠️ 规格未核验
📦 40-pin DIP
Related W78E051B 40 MHz DIP variant with lower available flash than the 4 KB W78E051C target

📋 参考替代料(不在目录中)

W78E051B-24

✅ 直接替换 ⚠️ 规格未核验
📦 40-pin DIP
Related W78E051B 24 MHz DIP variant, reducing maximum clock frequency by 40% and using less flash than the target

📋 参考替代料(不在目录中)

W78E051C40DL 最大额定值与电气特性

Product Type 8-bit 8051-compatible flash microcontroller
Architecture W78 8051
CPU Bit Width 8 bit
最大时钟频率 40 MHz
Program Memory Size 4 KB (4K x 8)
Program Memory Type Flash
RAM Size 128 x 8 bits
Number of I/O Pins 32
封装 40-DIP
安装方式 Through-hole

W78E051C40DL 40-dip 引脚配置指南

W78E051C40DL(40-dip 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

W78E051C40DL 的 40-dip 封装引脚图

暂无详细引脚数据: W78E051C40DL.

请参阅 数据手册 以查看完整引脚配置。

典型应用

W78E051C40DL 适用于 6 应用s: Appliance and Kitchen Equipment Controllers, Temperature and Environmental Sensing, LED Indicators and Display Sequencing, Small Motor and Relay Control, Timers, Counters, and Data Entry Devices, Educational and Rapid-Prototype Control Boards.

🏭

Appliance and Kitchen Equipment Controllers

The W78E051C40DL fits compact appliance controllers that coordinate buttons, indicators, sensors, relays, and timing functions. Its 8-bit W78 8051-compatible architecture can handle straightforward control sequences without an external program-memory device because the controller includes 4 KB of flash. With 32 I/O pins, the device can connect multiple digital inputs and outputs while the 128-byte RAM provides limited working storage. The 40 MHz maximum clock frequency supports responsive task scheduling, although firmware must remain within the 4 KB program-memory boundary. A practical design would use the I/O ports for panel inputs and discrete actuators, with timers and interrupts handling periodic sensing and output updates.

🧩

Temperature and Environmental Sensing

The W78E051C40DL can serve as the controller in a compact digital sensing instrument that converts switch, resistive, or digital-sensor inputs into local control outputs. Its 32 I/O pins provide ample digital interface capacity for sensor selection, status indicators, and alarm outputs, while the 4 KB flash area supports calibration parameters and compact conversion logic. The 128-byte RAM is suitable for short-lived samples and state variables but requires disciplined memory allocation. At a maximum 40 MHz operating frequency, the 8051-compatible core can service periodic readings and update a display or communications stage. Firmware should use interrupts for time-sensitive events and avoid large buffering arrays that would exceed the available RAM.

💡

LED Indicators and Display Sequencing

The W78E051C40DL is appropriate for LED status panels, counter displays, and sequencing controllers where multiple outputs must follow deterministic timing rules. Thirty-two I/O pins allow direct connection to digital display-control stages, indicator drivers, and mode-selection switches. Its 4 KB flash capacity accommodates a compact state machine and lookup tables for common display patterns, while the 40 MHz clock supports rapid output updates. The 128-byte RAM can hold short display buffers and debounce state without requiring a separate controller. Because the microcontroller is an 8-bit 8051-compatible design, engineers can reuse established timing and I/O techniques, but the final design must verify current limits, multiplexing requirements, and common-anode or common-cathode arrangement against the manufacturer datasheet.

⚡

Small Motor and Relay Control

The W78E051C40DL can implement a basic stepper, solenoid, or relay controller where the required timing is deterministic and the motor current remains within appropriately protected external drive circuitry. Its 32 I/O pins allow dedicated control signals, limit inputs, and status feedback, while the 40 MHz rating provides useful timing margin for pulse generation. The device should command transistors, drivers, or relays rather than drive inductive loads directly. Because the internal RAM is only 128 x 8 bits, motion sequences should be implemented compactly or stored in flash when space permits. Flyback protection, snubber design, current limiting, and isolation from switching transients are essential to prevent the MCU and its I/O pins from experiencing excessive electrical stress.

🔧

Timers, Counters, and Data Entry Devices

The W78E051C40DL is suitable for laboratory timers, event counters, programmable counters, and keypad-based entry modules. Its 32 I/O pins can support a matrix keypad, mode buttons, count inputs, display controls, and alarm outputs without requiring a large external bus. The 4 KB flash region can hold a compact menu structure, operating state machine, and display formatting routines, while 128 bytes of RAM accommodates current count and temporary variables. Running at up to 40 MHz allows interrupt-driven input capture and accurate time-base updates. Designers should debounce mechanical inputs, constrain recursive call depth, and verify timer accuracy against the selected oscillator configuration documented in the manufacturer datasheet.

🖥️

Educational and Rapid-Prototype Control Boards

The W78E051C40DL works well in educational 8051 experiments and rapid prototypes because it combines a widely recognized instruction set with 4 KB of flash, 128 bytes of RAM, and 32 I/O pins in an inspectable 40-DIP package. Students can build motor tests, key scanners, LED patterns, counters, and small sensor interfaces while retaining access to many pins for expansion. The through-hole format simplifies insertion into solderless breadboards, perfboards, and manually assembled training kits. The 40 MHz maximum operating frequency allows experimentation with timer and interrupt behavior beyond basic legacy 8051 examples. Because RAM is modest, prototype programs should use compact variables and demonstrate disciplined register and stack usage before larger peripherals are introduced.

What are the key specifications of W78E051C40DL that engineers should know?
The W78E051C40DL is an 8-bit W78 8051-compatible flash microcontroller with a maximum clock frequency of 40 MHz, 4 KB (4K x 8) of program memory, 128 x 8 bits of RAM, and 32 I/O pins. It is packaged in a 40-DIP through-hole configuration. According to the Nuvoton W78E51C/W78E051C datasheet, these parameters define the core resource and packaging limits for firmware and PCB design.
What is the operating frequency of W78E051C40DL?
The W78E051C40DL operates at up to 40 MHz. This rating identifies the maximum supported clock frequency of the 8051-compatible core rather than an indication that the device executes every instruction at that rate. According to the Nuvoton W78E51C/W78E051C datasheet, peripheral timing and clock configuration must also satisfy the device's operating requirements.
How much program and data memory does W78E051C40DL have?
The W78E051C40DL provides 4 KB (4K x 8) of flash program memory and 128 x 8 bits of RAM. The manufacturer W78E51C/W78E051C datasheet identifies flash as the program-memory type, allowing firmware to remain stored when the device is unpowered. Applications must also fit their working variables within the 128-byte internal RAM.
What package and pin count are used by W78E051C40DL?
The W78E051C40DL uses a 40-DIP package with 32 general-purpose I/O pins as identified by the manufacturer datasheet and product listing. The through-hole DIP format suits prototypes and manually assembled control boards. Use the pin-description table in the Nuvoton W78E51C/W78E051C datasheet when assigning power, oscillator, reset, programming, and I/O connections.
Where can I download the W78E051C40DL datasheet PDF?
The W78E051C40DL datasheet PDF is available through the Nuvoton W78E51C/W78E051C document linked on this page. That manufacturer document contains the device's pin descriptions, electrical characteristics, clock information, memory organization, and programming details. Confirm the document against the W78E051C40DL ordering code before using it for production qualification.
Where can I find the W78E051C40DL pinout?
The W78E051C40DL pinout is defined by the pin-description table and package drawing in the Nuvoton W78E51C/W78E051C datasheet. The device uses a 40-DIP package with 32 I/O pins, so do not infer the remaining eight connections by counting only I/O functions. Check the complete table for power, ground, reset, oscillator, programming, and other dedicated assignments.
Is W78E051C40DL suitable for 8051 embedded-control projects?
Yes, the W78E051C40DL is suitable for 8051-based embedded-control projects that fit within 4 KB of flash, 128 bytes of RAM, and the available 32 I/O pins. Its 40 MHz maximum clock frequency provides additional timing margin over slower legacy 8051 devices. The manufacturer W78E51C/W78E051C datasheet should be used to confirm peripheral and timing requirements.
What can replace W78E051C40DL with a drop-in MCU?
No drop-in replacement can be confirmed from the available cross-reference information for the W78E051C40DL. A valid replacement must match the 40-DIP footprint, pin functions, 8051-compatible programming model, memory requirements, clock arrangement, and peripheral resources rather than merely offering similar headline specifications. Use the Request a Quote form to discuss current sourcing and an engineering-grade replacement review.
Is W78E058DDG a direct replacement for W78E051C40DL?
The W78E058DDG should not be treated as a direct drop-in replacement for the W78E051C40DL without a complete pin and function comparison. The available comparison information identifies differences between the two devices, while the target W78E051C40DL is specified in a 40-DIP package and the DDG suffix denotes a different package option. A board-level substitution requires verification of every physical and electrical connection.
W78E051C40DL vs 8051 MCUs: when should I choose the W78E051C40DL?
Choose the W78E051C40DL when an application needs a compact 8051-compatible controller with 4 KB of flash, 128 bytes of RAM, 32 I/O pins, and operation up to 40 MHz. It is especially suitable for small through-hole control modules. Choose another MCU when firmware, RAM, precision peripherals, mixed-signal functions, or package density exceed what this device can provide.
When should I choose W78E051C40DL over a larger 8-bit microcontroller?
Choose the W78E051C40DL when the application is modest enough for 4 KB of flash and 128 bytes of RAM, needs only a 32-I/O interface, and benefits from an established 8051 software ecosystem. Its 40-DIP package also simplifies through-hole prototyping. Select a larger controller when code growth, data buffering, specialized peripherals, or industrial qualification requirements make the W78E051C40DL too constrained.
Where to buy W78E051C40DL online?
Use the Request a Quote form on this page to request W78E051C40DL availability, package quantity, and current lead time. The request identifies the exact 40-DIP ordering code W78E051C40DL, helping purchasing teams obtain a traceable quotation for the 8-bit, 40 MHz, 4 KB-flash microcontroller. Do not substitute a different package suffix without engineering approval.
What is the price of W78E051C40DL?
Current W78E051C40DL pricing is shown through the Request a Quote form on this page rather than as a static quotation. The request covers the exact W78E051C40DL ordering code, 40-DIP package, and requested quantities so purchasing can respond with the appropriate commercial terms. Pricing and availability can change with order volume and market conditions.
What is the lead time and stock status for W78E051C40DL?
The current stock status and lead time for W78E051C40DL should be requested through the Request a Quote form on this page. Submit the exact MPN W78E051C40DL, required quantity, and target date. This avoids substituting a mechanically similar but electrically different W78E051C package variant without confirming the complete ordering code.
What is the best Nuvoton equivalent for W78E051C40DL?
No Nuvoton equivalent can be confirmed as a drop-in match for the W78E051C40DL from the available information. The essential matching criteria are the 40-DIP footprint, pin assignments, 8051-compatible behavior, 4 KB flash and 128-byte RAM allocation, clock requirements, and peripheral functions. Request a current quotation for the original MPN and ask the manufacturer or your engineering team to validate any proposed substitute.

工程参考数据: W78E051C40DL ——对比、设计指导和合规信息。

选型指南

Choose the W78E051C40DL for compact 8051-based control designs that fit within 4 KB of flash, 128 bytes of RAM, and 32 I/O pins. Its 40 MHz maximum clock frequency provides useful timing margin, while the 40-DIP package simplifies through-hole prototyping and educational assembly. It is a strong fit for appliance controls, small timers, LED sequencing, basic relay or motor interfaces, and compact sensor modules. Select a larger 8-bit MCU when firmware growth, RAM buffering, specialized analog or communication peripherals, or smaller surface-mount packaging are priorities. Do not select a replacement solely from the W78E family name or a similar clock rating. A valid substitute must preserve the 40-DIP footprint, pin functions, programming approach, memory organization, clock arrangement, and electrical behavior. If the target application requires automotive qualification, expanded I/O, USB, networking, or high-resolution conversion, confirm those requirements before committing to this device.

设计说明

Treat the 40-DIP footprint as a through-hole layout and preserve adequate spacing around the device for insertion, soldering, inspection, and in-circuit programming access. Route the oscillator, reset, and programming connections according to the manufacturer pin-description table rather than assigning functions from the 32-I/O count alone. Confirm the final land pattern and pin-1 orientation against the official package drawing before releasing artwork.

Decouple the device close to its power pins with the capacitance and placement recommended by the manufacturer datasheet. Keep switching-node and relay-drive return currents away from the MCU ground path so transient current does not create voltage excursions on sensitive pins. Because the available specification set does not state the exact supply limits or decoupling value, verify both directly before component selection and schematic release.

Plan for the W78E051C40DL's constrained memory from the beginning: 4 KB of flash limits total firmware size, while 128 bytes of RAM constrain variables, buffers, and the call stack. Avoid large lookup arrays, recursive routines, and unbounded buffers. Reserve flash space for a bootloader or diagnostics only when the final code-size budget still supports them, and review linker utilization during prototype bring-up.

Keep sensitive timing and analog-adjacent traces short, provide a stable return path beneath the board, and separate communications or switching signals from oscillator and reset nets. If the board includes relays, motors, or lamps, use separate return paths and external drive transistors rather than routing load current through MCU pins. Validate reset behavior and clock startup under worst-case supply and temperature conditions before volume production.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available product information identifies the device as a 40-DIP 8-bit microcontroller but does not establish the requested environmental or material compliance declarations.

数据核验日期: 2026-11-11 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

W78E051C40DL datasheet W78E051C40DL datasheet pdf W78E051C40DL pinout W78E051C40DL specifications W78E051C40DL 40MHz 8051 W78E051C40DL 4KB flash W78E051C40DL 40-DIP W78E051C40DL replacement W78E051C40DL equivalent W78E051C40DL price W78E051C40DL buy Nuvoton W78E051C40DL

相关元器件 & 术语

Nuvoton Technology Corporation W78E051C40DL W78E051C W78E51C 8051-compatible microcontroller W78 microcontroller 8-bit microcontroller embedded microcontroller semiconductor flash program memory 4 KB program memory 128-byte RAM 40 MHz 32 I/O pins 40-DIP through-hole package timer interrupt digital control appliance controller LED sequencing small motor control sensor interface rapid prototyping
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情