AMD

XC4VSX25-10FF668I - 23,040-Cell Virtex-4 SX FPGA | AMD

料号: XC4VSX25-10FF668I ✗ 停产
1.2 V Vdss 668-ball FCBGA Package 1028 MHz Speed 2,359,296 bits Memory
最小起订量: 1 |

XC4VSX25-10FF668I 概述

The AMD XC4VSX25-10FF668I is a Virtex-4 SX field-programmable gate array with 23,040 logic cells, 320 configurable logic blocks, and a 1.2 V CMOS core in a 668-ball FCBGA package. The device uses a 90 nm CMOS process, supports an operating temperature range of 0°C to 85°C, and is identified by the -10 speed grade in its MPN. Its 1028 MHz internal frequency figure makes it suitable for demanding parallel processing, DSP, networking, and embedded systems.

A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Virtex-4 SX family combines configurable logic blocks with dedicated digital signal processing resources and substantial on-chip memory, allowing complete control systems to be implemented in a single device rather than across multiple fixed-function chips.

The XC4VSX25 combines 23,040 logic cells with 320 configurable logic blocks in a 668-ball FCBGA package. The 90 nm CMOS process and 1.2 V core voltage place it in a high-density programmable-logic class designed for embedded processing, serial connectivity, bus aggregation, and signal processing. Its -10 designation identifies the performance grade, while the -10FF668 package code specifies the 668-ball package configuration.

Technical adoption depends on validating power, clock, configuration, and interface requirements against the complete device documentation. The 1028 MHz figure should be treated as a device-specific internal-frequency value rather than a guarantee that every user I/O can operate at that rate. Practical designs must also account for the large number of power, ground, configuration, clock, and user-I/O balls in the FCBGA package.

Typical uses include telecom line-card processing, industrial control and automation, high-speed networking, server and storage interfaces, test and measurement equipment, and embedded DSP. The 23,040 logic cells make the device appropriate for parallel datapaths and protocol engines, while dedicated DSP resources allow arithmetic-heavy filtering and signal transformation without implementing every multiplier in general-purpose fabric.

The principal design challenge is high-speed PCB execution. A 668-ball FCBGA requires a dense, multilayer board with short return paths, carefully controlled impedance, multiple power planes, and disciplined decoupling. Configuration storage, clocking, JTAG access, and programming support also require complete schematic and layout review before production release.

This product page combines the verified device identity, package details, operating information, comparison guidance, and engineering-focused replacement considerations. It also highlights practical constraints that engineers must evaluate when moving from the XC4VSX25-10FF668I into a redesign, industrial temperature upgrade, or a different Virtex-4 SX density and speed grade.

直接替换替代料: XC4VSX25-10FF668I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: XC4VSX25-10FF668I (相同外形与封装尺寸) ——差异在于 Package Type, Speed Grade, Mounting Type, Device Type, Internal Frequency.

AMD
Package Type: 668-pin FCBGA
Speed Grade: -10
对比 XC4VSX25-10FF668I →
Xilinx
Speed Grade: -11
Internal Frequency: 1,028 MHz
对比 XC4VSX25-10FF668I →
AMD
Package Type: 668-pin FCBGA, 27 mm × 27 mm
Speed Grade: -10
Mounting Type: Surface-mount ball grid array
对比 XC4VSX25-10FF668I →

XC4VSX25-11FF668I

✅ 直接替换
Xilinx
📦 668-ball FCBGA
Virtex-4 SX field-programmable gate array · 23,040 cells · 2,560 CLBs · 128 slices · 2,304 Kb · 1,028 MHz · 90 nm CMOS · 1.2 V

联系询价

查看数据手册 →

XC4VSX25-10FFG668I

✅ 直接替换
📦 668-ball FCBGA
Adds the lead-free G package designation while retaining the -10 speed grade and Virtex-4 SX device family

📋 参考替代料(不在目录中)

XC4VSX25-10FF668C

✅ 直接替换
AMD
📦 668-ball FCBGA
Virtex-4 SX field-programmable gate array · 23,040 cells · 320 I/O · 1,028 MHz · 90 nm CMOS · 1.2 V · -10

联系询价

查看数据手册 →

XC4VSX35-10FFG668I

✅ 直接替换
📦 668-ball FCBGA
Uses the larger VSX35 density member with approximately 40% more logic cells than the VSX25 target, while retaining the 668-ball package and -10 speed grade

📋 参考替代料(不在目录中)

XC4VSX35-10FF668C

✅ 直接替换
AMD
📦 668-ball FCBGA
Virtex-4 SX field-programmable gate array (FPGA) · 34,560 cells · 15,360 ALMs · 3,538,944 bits · 90 nm CMOS · 1.2 V · 1.14 V to 1.26 V · 1028 MHz

联系询价

查看数据手册 →

XC4VSX25-10FF668I 最大额定值与电气特性

Device Type Virtex-4 SX field-programmable gate array
Logic Cells 23,040 cells
Configurable Logic Blocks 320 blocks
Logic Block Count 2,560 blocks
Internal Frequency 1028 MHz
Process Technology 90 nm CMOS
Core Supply Voltage 1.2 V
工作温度范围 0°C to 85°C
Package Type 668-ball FCBGA
Total Pin Count 668 pins
Terminal Pitch 1.00 mm
安装类型 Surface mount
Speed Grade -10 grade
Logic Family CMOS programmable logic
RoHS 状态 unknown
REACH Status unknown
Automotive Qualification Not qualified
Program Memory 2,359,296 bits

XC4VSX25-10FF668I 668-ball fcbga 引脚配置指南

XC4VSX25-10FF668I(668-ball fcbga 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XC4VSX25-10FF668I 的 668-ball fcbga 封装引脚图

暂无详细引脚数据: XC4VSX25-10FF668I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XC4VSX25-10FF668I 适用于 6 应用s: Telecom Line-Card Signal Processing, Industrial Control and Automation, High-Speed Network Interface Aggregation, Server and Storage Interface Control, Test and Measurement Instrumentation, Embedded DSP and Digital Filtering.

🌐

Telecom Line-Card Signal Processing

The XC4VSX25-10FF668I fits telecom line-card designs that combine parallel packet processing, serial interfaces, and dedicated arithmetic functions. Its 23,040 logic cells and 320 configurable logic blocks provide substantial capacity for protocol state machines, buffering, framing, and control logic, while the listed 1028 MHz internal frequency supports demanding clock domains. The -10 speed grade and 1.2 V CMOS core should be evaluated against the complete timing specification. A 668-ball FCBGA also demands a multilayer PCB with stringent power delivery and return-path control, making careful pin assignment, layer transitions, and decoupling essential for reliable telecom equipment.

🏭

Industrial Control and Automation

The XC4VSX25-10FF668I can implement industrial controllers that require deterministic parallel logic, multiple I/O standards, and flexible hardware configuration. Its 23,040 logic cells allow control algorithms, communication stacks, motion sequencing, and diagnostics to be consolidated in one FPGA rather than divided among multiple processors. The device is documented for 0°C to 85°C operation, making it suitable for many industrial enclosures when the complete system thermal profile remains inside that range. Designers should reserve resources for fault handling and safe-state behavior, then validate signal integrity and power integrity across every supported voltage and temperature condition.

🌐

High-Speed Network Interface Aggregation

The XC4VSX25-10FF668I is suitable for network interface aggregation, packet classification, and protocol adaptation because it provides 23,040 logic cells, 320 configurable logic blocks, and a listed 1028 MHz internal-frequency figure. These resources can support parallel datapaths, look-up structures, FIFO control, and framing logic while leaving dedicated fabric for high-speed serial interfaces. The actual line rate remains dependent on the selected I/O standard, board topology, and timing closure, so the 1028 MHz figure should not be treated as a universal I/O-rate guarantee. Pin planning should preserve complete reference-clock and decoupling access on the 668-ball FCBGA.

🖥️

Server and Storage Interface Control

The XC4VSX25-10FF668I can serve as a dedicated interface controller in server, storage, and accelerator systems where flexible logic timing and multiple external interfaces are important. Its 23,040 logic cells and 320 configurable logic blocks support command sequencing, DMA control, data routing, error handling, and status generation. The device's listed 1.2 V core voltage requires a carefully partitioned power tree, while the 668-ball FCBGA requires short high-speed escape paths and a multilayer stack-up. Clock jitter, power sequencing, termination, and simultaneous-switching-noise analysis should be completed before the design is released for volume production.

🔧

Test and Measurement Instrumentation

The XC4VSX25-10FF668I fits programmable test and measurement equipment that combines acquisition logic, sequencing, timing control, and data processing in one FPGA. Its 23,040 logic cells support parallel capture pipelines, trigger logic, counters, and control functions, while the listed internal frequency of 1028 MHz provides headroom for deeply pipelined processing. Instrument-grade accuracy still depends on calibrated references, controlled clock distribution, and carefully isolated analog interfaces. Because the FCBGA has 668 balls at 1.00 mm pitch, PCB warpage, thermal cycling, component placement, and accessible power planes must be validated during hardware bring-up.

⚡

Embedded DSP and Digital Filtering

The XC4VSX25-10FF668I is well suited to fixed and floating-point digital signal processing because the Virtex-4 SX family combines programmable fabric with dedicated DSP-oriented resources. The device's 23,040 logic cells can support control paths, buffer management, and multi-channel scheduling around the arithmetic blocks, allowing filters, correlators, and data-classification engines to be consolidated. The listed 1028 MHz internal-frequency value must be reconciled with the selected clocking, pipeline depth, DSP operating conditions, and I/O timing budget. In a 668-ball FCBGA implementation, controlled-clock routing and uninterrupted power planes are particularly important because DSP-heavy designs can concentrate switching activity in small regions.

Where to buy XC4VSX25-10FF668I online?
XC4VSX25-10FF668I can be requested through the “Request a Quote” form on this page for procurement review. The part is identified as a Virtex-4 SX FPGA in a 668-ball FCBGA package with 23,040 logic cells. Because legacy FPGA inventory can vary by lot and traceability requirements, the quote request should specify quantity, date code preference, programming requirements, and acceptable inspection conditions.
What is the price of XC4VSX25-10FF668I?
Use the “Request a Quote” form on this page for the current XC4VSX25-10FF668I unit price and volume terms. The device is a 668-ball Virtex-4 SX FPGA containing 23,040 logic cells and 320 configurable logic blocks. Pricing can be affected by condition, lot traceability, programming, quantity, and delivery requirements, so a complete BOM line and target quantity should accompany the request.
What is the lead time for XC4VSX25-10FF668I?
Request the current lead time using the “Request a Quote” form on this page and specify the required quantity and annual usage. XC4VSX25-10FF668I is an older 90 nm Virtex-4 SX FPGA, so availability may depend on remaining original inventory and qualification of the source. For production planning, include required milestones, accepted date codes, inspection criteria, and whether programmed or unprogrammed devices are needed.
Is XC4VSX25-10FF668I in stock?
Current stock status for XC4VSX25-10FF668I should be confirmed through the “Request a Quote” form on this page. The searchable product listings include inventory-oriented references, but a listing alone does not guarantee immediately allocatable stock. Submit the required quantity, shipment destination, date-code preference, and traceability requirements so procurement can return a confirmed allocation rather than an unverified availability indication.
What are the key specifications of XC4VSX25-10FF668I that engineers should know?
The XC4VSX25-10FF668I is a 90 nm CMOS Virtex-4 SX FPGA with 23,040 logic cells, 320 configurable logic blocks, a 1.2 V core supply, and a 668-ball FCBGA package. Its listed internal frequency is 1028 MHz, and the documented operating range is 0°C to 85°C. The package uses a 1.00 mm terminal pitch, making dense multilayer PCB layout and power-plane design central to implementation.
What is the difference between XC4VSX25-10FF668I and XC4VSX25-11FF668I?
The primary ordering-code difference is speed grade: XC4VSX25-10FF668I carries the -10 grade, while XC4VSX25-11FF668I carries the -11 grade. Both are Virtex-4 SX devices associated with the 668-ball package family. The -11 option targets higher performance, but board timing, power, and design-tool constraints must be checked; a faster grade does not guarantee that every design closes timing.
XC4VSX25-10FF668I vs XC4VLX25-10FF668I - which is better for DSP?
XC4VSX25-10FF668I is the better starting point for DSP-oriented designs because it belongs to the Virtex-4 SX family, which emphasizes programmable logic and DSP resources. XC4VLX25-10FF668I belongs to the lower-power-oriented Virtex-4 LX family. Although both use a 668-ball package, they are not interchangeable FPGA designs; logic resources, memory, power characteristics, and device configuration must be reviewed before selection.
When should I choose XC4VSX25-10FF668I over XC4VSX25-10FFG668I?
Choose XC4VSX25-10FF668I when an original-system requirement specifically identifies that MPN and its associated qualification, documentation, and sourcing records. XC4VSX25-10FFG668I is identified as a lead-free device in its product listing and may be preferable for new lead-free procurement programs. Treat the change as a controlled engineering review because order codes, markings, availability, and qualification documentation must match the finished assembly.
When should I choose XC4VSX25-10FF668I over a larger Virtex-4 SX device?
Choose XC4VSX25-10FF668I when the design fits within its 23,040 logic cells and associated memory, DSP, and I/O resources while minimizing package cost, power, and routing complexity. A larger XC4VSX35 device may be appropriate when utilization is too high, but the larger device can change resource availability, power planning, timing, and potentially the bitstream and PCB implementation.
What is the best drop-in replacement for XC4VSX25-10FF668I?
The closest same-family drop-in candidates include XC4VSX25-11FF668I, XC4VSX25-10FF668C, and XC4VSX25-10FFG668I because they are associated with the same Virtex-4 SX device and 668-ball package class. No substitute should be approved solely from the MPN: verify the package drawing, pin assignments, temperature grade, speed grade, power characteristics, configuration interface, and bitstream compatibility in the device documentation.
Can XC4VSX25-10FF668I replace an XC4VSX25-10FF668C?
A physical replacement cannot be confirmed from the ordering codes alone. XC4VSX25-10FF668I and XC4VSX25-10FF668C share the Virtex-4 SX family and 668-ball package naming pattern, but the suffix can distinguish temperature grade, lead-free status, or commercial qualification. Compare the full ordering guide, package drawing, pinout, electrical limits, and qualification records before approving the substitution.
What is an AMD equivalent for XC4VSX25-10FF668I?
The closest AMD-family candidates are XC4VSX25-11FF668I, XC4VSX25-10FF668C, and XC4VSX25-10FFG668I, all identified with the Virtex-4 SX and 668-ball package platform. These are same-family options rather than guaranteed equivalents. A cross-brand FPGA is not automatically a drop-in replacement because routing tables, configuration memories, power sequencing, toolchains, and bitstream architecture can differ even when the package has the same ball count.
Where to download the XC4VSX25-10FF668I datasheet PDF?
The XC4VSX25-10FF668I product links on this page provide access to the device datasheet and related technical documents. Start with the AMD/Xilinx Virtex-4 data sheet and the specific ordering-guide document, then check the package drawing and package files. The product is listed with 23,040 logic cells, 320 configurable logic blocks, a 1.2 V core supply, and a 668-ball FCBGA package.
Where can I find the XC4VSX25-10FF668I pinout?
Use the AMD/Xilinx package drawing and the XC4VSX25-10FF668I pinout information linked from the device documentation rather than inferring ball assignments from a generic FCBGA layout. The package contains 668 balls at a 1.00 mm terminal pitch, with many positions assigned to power, ground, configuration, clocking, and user I/O. The complete manufacturer package file is required for PCB escape routing and symbol generation.
Does XC4VSX25-10FF668I support industrial-temperature operation?
The listed operating-temperature range for XC4VSX25-10FF668I is 0°C to 85°C, matching the information shown for this exact ordering code. That range is not the same as the wider −40°C to 85°C industrial range used by some suffix variants. If the enclosure or operating environment can exceed 85°C, select a part with an explicitly documented industrial temperature grade and recheck every associated electrical limit.

工程参考数据: XC4VSX25-10FF668I ——对比、设计指导和合规信息。

选型指南

Select XC4VSX25-10FF668I when an existing AMD/Xilinx design, qualification record, or controlled inventory plan specifically requires that MPN. Its 23,040 logic cells, 320 configurable logic blocks, -10 speed grade, 1.2 V core supply, and 668-ball FCBGA make it suitable for DSP, networking, telecom, industrial, and test systems. Use XC4VSX25-11FF668I only when higher timing performance is needed and the complete design has been revalidated. Consider XC4VSX25-10FFG668I for a controlled lead-free procurement transition. The XC4VSX35 options provide more logic capacity but can change utilization, timing, power, configuration, and PCB implementation. No alternative should be treated as automatically equivalent because a common package does not by itself guarantee identical resources, temperature ratings, qualification, or bitstream compatibility.

与替代料对比

参数 本产品 XC4VSX25-11FF668I XC4VSX25-10FFG668I XC4VSX25-10FF668C XC4VSX35-10FFG668I XC4VSX35-10FF668C
Brand AMD AMD AMD AMD AMD AMD
Package 668-ball FCBGA 668-ball FCBGA 668-ball FCBGA 668-ball FCBGA 668-ball FCBGA 668-ball FCBGA
FPGA Family Virtex-4 SX Virtex-4 SX Virtex-4 SX Virtex-4 SX Virtex-4 SX Virtex-4 SX
Speed Grade -10 -11 -10 -10 -10 -10

关键差异点

  • Exact -10 speed-grade identity (对比 XC4VSX25-11FF668I)
  • Original non-G ordering identity (对比 XC4VSX25-10FFG668I)
  • Lower density than the VSX35 alternatives (对比 XC4VSX35-10FF668C)

设计说明

Plan the PCB for a 668-ball FCBGA with a 1.00 mm terminal pitch rather than treating it as a conventional fine-pitch BGA. Assign power and ground balls directly to corresponding plane layers, keep configuration and clock pins away from high-slew-rate user outputs, and provide uninterrupted return paths beneath every high-speed route. Validate layer transitions, via construction, backdrilling, and package warpage using the manufacturer package and design rules.

Separate the 1.2 V core rail from the other supply requirements and validate sequencing, tolerance, transient response, and startup behavior against the device documentation. Place local ceramic decoupling close to the associated power balls and use the package power-plane pattern to minimize distribution impedance. Estimated dissipation for a finished design should be calculated from actual core and I/O voltage, current, and duty cycle before copper and thermal solutions are finalized.

Use the manufacturer package files to generate the symbol, footprint, and escape routing. Keep the configuration interface accessible for programming and boundary-scan operations, provide clean clock reference routing, and reserve unused balls according to the package guidance. Do not infer a pinout from the 668-ball count: power, ground, configuration, clock, and user-I/O assignments must come from the exact device package data.

Do not assume that every alternative with the same package family is a functional drop-in. The -10 and -11 speed grades can change timing margins and power behavior, the G suffix identifies a lead-free ordering option, and the C suffix requires confirmation of qualification and temperature coverage. Validate the ordering guide, pin assignments, electrical limits, configuration method, and design-tool support before substituting any listed alternative.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The XC4VSX25-10FFG668I listing is identified as Pb-Free, but explicit compliance documentation for the target XC4VSX25-10FF668I was not identified. Automotive qualification is not indicated for the target ordering code.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

XC4VSX25-10FF668I datasheet XC4VSX25-10FF668I pinout XC4VSX25-10FF668I footprint XC4VSX25-10FF668I equivalent XC4VSX25-10FF668I replacement XC4VSX25-10FF668I cross reference XC4VSX25-10FF668I vs XC4VLX25-10FF668I AMD XC4VSX25-10FF668I XC4VSX25-10FF668I price XC4VSX25-10FF668I stock XC4VSX25-10FF668I schematic XC4VSX25 668 FCBGA FPGA

相关元器件 & 术语

AMD Xilinx XC4VSX25-10FF668I XC4VSX25-11FF668I XC4VSX25-10FFG668I XC4VSX25-10FF668C XC4VSX35-10FFG668I XC4VSX35-10FF668C XC4VLX25-10FF668I Virtex-4 SX Virtex-4 LX FPGA field-programmable gate array programmable logic device semiconductor configurable logic block logic cell digital signal processing DSP FCBGA 668-ball package surface mount 90 nm CMOS 1.2 V core supply 1028 MHz internal frequency JTAG RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情