AMD

XC7A200T-1SBG484I - 215K Logic Cell Artix-7 FPGA | AMD

料号: XC7A200T-1SBG484I ✓ 量产中
0.95 V to 1.05 V Vdss 484 terminals Package 1,098 MHz Speed Block RAM integrated in the FPGA fabric Memory
最小起订量: 1 |

XC7A200T-1SBG484I 概述

The AMD XC7A200T-1SBG484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 285 I/O, and a 484-terminal lidless FCBGA package measuring 19 mm x 19 mm. Built on 28 nm FPGA technology, this device combines programmable logic resources with approximately 13,140 Kb of block RAM and supports clock frequencies up to 1,098 MHz.

A field-programmable gate array is a reconfigurable digital semiconductor that combines an array of programmable logic blocks, programmable I/O, embedded memory, dedicated processing resources, and clock-management circuitry. Within the FPGA hierarchy, the XC7A200T belongs to the Artix-7 family and is positioned for designs that require substantial parallel processing in a relatively compact, power-conscious device.

The XC7A200T-1SBG484I provides 215,360 programmable logic cells and 285 user I/O in its SBG484 package. Its 28 nm process technology supports high performance and low power consumption, while the -1 speed grade targets demanding timing applications. The device operates from a 0.95 V to 1.05 V core supply, according to the manufacturer datasheet listing, and can be paired with external memory and interface circuitry for higher-bandwidth designs.

Artix-7 devices integrate programmable logic with block RAM, DSP slices, dedicated clock pins, and high-performance I/O resources. The 215,360-cell device is useful when a fixed application-specific integrated circuit would require expensive redesigns. Because configuration data determines the implemented circuit, one hardware platform can support multiple firmware revisions, protocol variants, or field-upgradeable functions after manufacturing.

Typical uses for this FPGA include industrial control, robotics, high-speed data acquisition, embedded vision, communications infrastructure, test equipment, and low-latency signal processing. The large logic capacity is especially useful for parallel sensor aggregation, hardware protocol bridges, packet processing, and control systems that combine deterministic hardware timing with programmable decision logic.

The 19 mm x 19 mm lidless FCBGA requires careful PCB layout, controlled power delivery, and thermal management. Designers should follow the AMD package pinout files and UG475 when assigning balls, and should validate the selected memory interface, configuration method, voltage rails, and differential I/O requirements against the Artix-7 data sheet before layout release.

This page combines family-level specifications, verified package details, drop-in speed-grade alternatives, and application-focused design guidance. It also organizes the most useful procurement and documentation entry points for engineers comparing the XC7A200T-1SBG484I with related Artix-7 devices.

直接替换替代料: XC7A200T-1SBG484I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: XC7A200T-1SBG484I (相同外形与封装尺寸) ——差异在于 Package, Speed Grade, Process Technology, Device Type, Logic Cells.

AMD
Package: 484-BBGA, lidless FCBGA
Speed Grade: Grade 1
Device Type: Artix-7 Field Programmable Gate Array (FPGA)
对比 XC7A200T-1SBG484I →
AMD
Package: 484-BBGA, FCBGA
Process Technology: 28nm HKMG
Logic Cells: 215360
对比 XC7A200T-1SBG484I →
AMD
Package: 484-ball FCBGA, 19 mm x 19 mm
对比 XC7A200T-1SBG484I →
AMD
Package: 484-BBGA, FCBGA (FBG484)
Speed Grade: -2
对比 XC7A200T-1SBG484I →

XC7A200T-2SBG484I

✅ 直接替换
📦 SBG484 (19 mm x 19 mm lidless FCBGA)
Uses the -2 speed grade instead of -1; logic cells, I/O count, and 484-ball package remain the same, with different timing and power characteristics

📋 参考替代料(不在目录中)

XC7A200T-L1SBG484I

✅ 直接替换
📦 SBG484 (19 mm x 19 mm lidless FCBGA)
Uses the L1 ordering designation rather than the -1SBG484I designation; the listed device retains 215,360 cells, 285 I/O, and the same SBG484 package

📋 参考替代料(不在目录中)

XC7A200T-1SB484I

✅ 直接替换
AMD
📦 SBG484 (19 mm x 19 mm lidless FCBGA)
Artix-7 field-programmable gate array · 215,360 cells · 16,825 CLBs · 13,455,360 bits · 740 slices · 285 I/Os · 28 nm · 1 V

联系询价

查看数据手册 →

XC7A200T-1FBG484I

✅ 直接替换
AMD
📦 SBG484 (19 mm x 19 mm lidless FCBGA)
Artix-7 · 215360 · 33650 · 13 Mb (365 x 36Kb blocks) · 740 DSP48E1 · 285 · LVCMOS, LVDS, HSTL · 0.95V to 1.05V

✗ 无现货

$38.5 / 个

查看数据手册 →

XC7A200T-2FBG484I

✅ 直接替换
AMD
📦 SBG484 (19 mm x 19 mm lidless FCBGA)
Artix-7 · 215360 · 16825 · 13455360 · 285 · 740 · 16 · 6.6 Gb/s

✗ 无现货

$89.15 / 个

查看数据手册 →

XC7A200T-1SBG484I 最大额定值与电气特性

Device Type Artix-7 Field-Programmable Gate Array
Logic Cells 215,360 cells
Block RAM 13,140 Kb
User I/O 285 I/O
Package Terminals 484 terminals
Package Type 19 mm x 19 mm lidless FCBGA
Package Designation SBG484
Process Technology 28 nm
Core Supply Voltage 0.95 V to 1.05 V
最大时钟频率 1,098 MHz
Speed Grade -1
安装方式 Surface mount
Programmable Logic FPGA configurable digital logic and I/O
Embedded Memory Block RAM integrated in the FPGA fabric

XC7A200T-1SBG484I sbg484 引脚配置指南

XC7A200T-1SBG484I(sbg484 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XC7A200T-1SBG484I 的 sbg484 封装引脚图

暂无详细引脚数据: XC7A200T-1SBG484I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XC7A200T-1SBG484I 适用于 6 应用s: Industrial Automation and Machine Control, Robotics and Autonomous Navigation, High-Speed Data Acquisition, Communications and Protocol Bridging, Embedded Vision and Image Processing, Test and Measurement Equipment.

🏭

Industrial Automation and Machine Control

The XC7A200T-1SBG484I is well suited to industrial controllers that combine deterministic motion sequencing with flexible machine-vision and sensor processing. Its 215,360 logic cells can host multiple control loops, safety interlocks, protocol converters, and data-preparation pipelines in parallel, while 285 I/O provide connections for encoders, discrete sensors, actuators, and field-bus transceivers. The -1 speed grade supports demanding internal timing without moving to the higher-power -2 grade. For deployment, verify the industrial temperature qualification and power budget against the enclosure temperature, then validate all interface timing with post-layout static timing analysis.

🔧

Robotics and Autonomous Navigation

The AMD XC7A200T-1SBG484I fits robotic perception and navigation designs that need parallel sensor fusion without a fixed circuit layout. The FPGA fabric can execute lane detection, point-cloud preprocessing, obstacle detection, and axis-control logic simultaneously, reducing host-processor load and improving end-to-end responsiveness. Its 13,140 Kb of block RAM provides local buffering for camera frames or lidar packets, and the 285 I/O can distribute high-speed sensor interfaces. Keep thermal dissipation and supply-noise margin under control because sustained parallel switching at high I/O rates can raise junction temperature and reduce timing margin.

📡

High-Speed Data Acquisition

The XC7A200T-1SBG484I is appropriate for multi-channel acquisition systems that must digitize, filter, and packetize data in real time. Parallel programmable logic can implement multiple ADC channels, digital filters, threshold detection, and trigger logic while block RAM buffers burst data before transmission. The 285 I/O allow simultaneous access to converters, clocks, and external memory, and the up-to-1,098 MHz device performance supports demanding internal clocking. Validate input standards, clock-to-pin relationships, and external memory timing with the selected device speed grade before schematic and layout release.

🌐

Communications and Protocol Bridging

The XC7A200T-1SBG484I can consolidate several communications functions into one Artix-7 implementation, including packet classification, protocol conversion, timing recovery, and interface isolation. Its 215,360 logic cells allow redundant datapaths and control firmware to coexist, while 13,140 Kb of block RAM supports packet queues and transmit buffering. The -1 speed grade is useful when power consumption is more important than the maximum timing margin of the -2 grade. Confirm transceiver I/O standards, reference-clock requirements, and line-rate timing before committing the device to a production board.

🎥

Embedded Vision and Image Processing

The XC7A200T-1SBG484I supports embedded-vision designs that perform pixel manipulation, thresholding, color conversion, and feature extraction directly in programmable logic. Parallel pipelines can process multiple image regions concurrently, reducing data-transfer latency between the sensor, processor, and external memory. The 13,140 Kb of block RAM can hold line buffers or compact frame regions, while 285 I/O provide channels for camera interfaces, serializers, and storage controllers. Power estimation should include both fabric utilization and I/O activity because high-speed interfaces can consume significant dynamic power even when the logic fabric is only partially utilized.

🖥️

Test and Measurement Equipment

The XC7A200T-1SBG484I fits programmable test equipment, automatic test systems, and real-time analysis instruments that benefit from parallel execution and field reconfiguration. Engineers can implement acquisition pipelines, pattern generation, sequence control, and analysis algorithms in one device, allowing the same board to support multiple test profiles. Its large logic capacity and 285 I/O simplify the connection of instruments, trigger buses, and memory banks. Use the SBG484 ball map from the AMD package pinout files and confirm the chosen I/O standards before routing high-speed or differential signals.

What are the key specifications of XC7A200T-1SBG484I that engineers should know?
The XC7A200T-1SBG484I provides 215,360 logic cells, 285 I/O, and up to 1,098 MHz performance in a 19 mm x 19 mm SBG484 lidless FCBGA. The device uses 28 nm process technology and a 0.95 V to 1.05 V core supply. According to the manufacturer datasheet listing, it also includes 13,140 Kb of block RAM. The -1 suffix identifies its speed grade, while the industrial I suffix identifies the temperature qualification.
Where can I download the XC7A200T-1SBG484I datasheet PDF?
The XC7A200T-1SBG484I datasheet is available through the AMD/Xilinx Artix-7 documentation and the datasheet listing linked on this page. The manufacturer data sheet is titled Artix-7 FPGAs Data Sheet: DC and AC Switching Characteristics and is listed as a 63-page document. Use the manufacturer PDF for authoritative electrical limits, timing tables, pin definitions, and package details rather than relying on distributor summaries.
Where can I find the XC7A200T-1SBG484I pinout and ball map?
The authoritative XC7A200T-1SBG484I ball map is available in the AMD Artix-7 Package Device Pinout Files, whose format is described by UG475. Use the SBG484 package file to confirm every ball location, dedicated configuration pins, clock pins, power balls, and I/O standards. Because this device has 484 terminals, a generic package diagram must not be used for board routing.
What is the XC7A200T-1SBG484I used for?
The XC7A200T-1SBG484I is used for designs requiring high parallelism, reconfigurable logic, and deterministic hardware performance. Typical applications include industrial automation, robotics, communications, embedded vision, data acquisition, and test equipment. Its 215,360 logic cells allow multiple processing pipelines to operate concurrently, while the 13,140 Kb block RAM supports buffering and high-throughput data movement.
Is XC7A200T-1SBG484I the same as XC7A200T-2SBG484I?
No. Both devices use the Artix-7 XC7A200T implementation and SBG484 package, but their speed grades differ. XC7A200T-1SBG484I is the -1 speed grade, while XC7A200T-2SBG484I is the -2 speed grade and can provide a different timing-performance trade-off. Confirm the required internal clock, I/O timing, and system timing margins before substituting one grade for the other.
Can XC7A200T-2SBG484I replace XC7A200T-1SBG484I?
XC7A200T-2SBG484I is a same-package Artix-7 alternative with the same 215,360-cell device and 285 I/O configuration, but it uses the -2 speed grade rather than -1. Whether it is an acceptable drop-in replacement depends on timing closure, power, thermal margins, and procurement requirements. Verify the design against the timing report for the specific speed grade before committing the substitution.
What is the best AMD or Xilinx equivalent for XC7A200T-1SBG484I?
The closest same-family alternatives are the speed-grade and package variants of XC7A200T, including XC7A200T-L1SBG484I, XC7A200T-2SBG484I, XC7A200T-1SB484I, and XC7A200T-1FBG484I. No cross-manufacturer drop-in equivalent is established because FPGA pin compatibility also depends on configuration, memory interfaces, voltage rails, and the complete Artix-7 device architecture.
When should I choose XC7A200T-1SBG484I instead of a faster Artix-7 grade?
Choose XC7A200T-1SBG484I when its timing performance satisfies the design and power, thermal, or procurement constraints make a higher speed grade unnecessary. The -1 grade retains 215,360 logic cells and 285 I/O in the SBG484 footprint. A higher grade may be preferable only when the timing report demonstrates that the -1 device cannot close the required clock or interface paths.
Is XC7A200T-1SBG484I suitable for industrial control and robotics?
Yes, the XC7A200T-1SBG484I is suitable for industrial control and robotics designs that benefit from deterministic parallel processing and reconfigurable hardware. Its 285 I/O support numerous sensors, actuators, field buses, and machine-vision interfaces. The industrial I suffix identifies the temperature qualification, and the -1 speed grade supports timing-sensitive control paths.
What can replace XC7A200T-1SBG484I?
Replace XC7A200T-1SBG484I with XC7A200T-2SBG484I only after checking speed-grade-dependent timing and power behavior. Other closely related choices include XC7A200T-L1SBG484I, XC7A200T-1SB484I, and XC7A200T-1FBG484I. Each must be checked for package ball compatibility, temperature grade, configuration scheme, memory interfaces, and power requirements rather than accepted on the base device name alone.
How many I/O and logic cells does XC7A200T-1SBG484I have?
The XC7A200T-1SBG484I contains 215,360 programmable logic cells and provides 285 user I/O in its 484-terminal package. The device also includes 13,140 Kb of block RAM according to the manufacturer family documentation. Available user I/O can be reduced by dedicated configuration, clock, power, and package-reserved balls.
What supply voltage does the XC7A200T-1SBG484I require?
The XC7A200T-1SBG484I core operates from 0.95 V to 1.05 V, as stated in the manufacturer datasheet listing. Supporting rails, configuration voltage, and auxiliary I/O voltages must be selected from the complete Artix-7 power specification. Decoupling and rail sequencing should follow the recommended power-supply architecture in the manufacturer documentation.
How do I buy XC7A200T-1SBG484I and check availability?
Use the Request a Quote form on this page to request current XC7A200T-1SBG484I availability, lead time, and order quantities. The part is an AMD/Xilinx 484-FBGA device with 215,360 logic cells and 285 I/O. Provide the required temperature, grade, tray or reel packaging preference, and target date so the sourcing response can reflect the exact configuration.
What is the lead time for XC7A200T-1SBG484I?
The current lead time for XC7A200T-1SBG484I should be confirmed through the Request a Quote form on this page. Availability can change with allocation, package volume, and order size, so a confirmed production schedule is more useful than a generic stock statement. Include your requested quantity, delivery date, and packaging requirement with the inquiry.
What are the key differences between XC7A200T-1SBG484I and XC7A200T-L1SBG484I?
Both are Artix-7 XC7A200T devices in the SBG484 package with 215,360 logic cells and 285 I/O, but their ordering options differ in grade designation. The -1 in both part numbers identifies the speed grade, while the additional L designation distinguishes the linked L1SBG484I ordering variant. Review the manufacturer ordering table for the exact temperature, lifecycle, and qualification treatment before substitution.

工程参考数据: XC7A200T-1SBG484I ——对比、设计指导和合规信息。

选型指南

Select the XC7A200T-1SBG484I when the design needs the full 215,360-cell Artix-7 platform, 285 I/O, 13,140 Kb of block RAM, and a 484-terminal lidless FCBGA without requiring the -2 speed grade. It is a sound choice for industrial control, robotics, communications, embedded vision, and acquisition systems where deterministic parallel processing and configuration flexibility matter. Use XC7A200T-2SBG484I when post-placement timing shows that the -1 grade cannot close the required paths and the additional power or thermal load is acceptable. Consider XC7A200T-L1SBG484I when its ordering designation satisfies the required lifecycle or qualification plan. For XC7A200T-1SB484I and FBG484 variants, confirm the exact package files, temperature treatment, and configuration requirements before substitution. No cross-brand FPGA should be treated as drop-in without verifying ball compatibility, memory interfaces, clocking, configuration, and power rails.

与替代料对比

参数 本产品 XC7A200T-2SBG484I XC7A200T-L1SBG484I XC7A200T-1SB484I XC7A200T-1FBG484I XC7A200T-2FBG484I
Brand AMD AMD AMD AMD AMD AMD
Package SBG484 (19 mm x 19 mm lidless FCBGA) SBG484 (19 mm x 19 mm lidless FCBGA) SBG484 (19 mm x 19 mm lidless FCBGA) 484-FBGA platform 19 mm x 19 mm 484-FBGA platform 19 mm x 19 mm 484-FBGA platform
Logic Cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells 215,360 cells
User I/O 285 I/O 285 I/O 285 I/O 285 I/O 285 I/O 285 I/O
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Core Supply Voltage 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V
Speed Grade -1 -2 L1 -1 -1 -2
Pin Count 484 terminals 484 terminals 484 terminals 484 terminals 484 terminals 484 terminals

关键差异点

  • Matches the -1 speed grade while preserving the full XC7A200T logic capacity (对比 XC7A200T-2FBG484I)
  • Uses the SBG484 ordering designation for the 19 mm x 19 mm lidless FCBGA platform (对比 XC7A200T-1SB484I)
  • Supports 13,140 Kb of block RAM in the same 484-terminal device platform (对比 XC7A200T-1FBG484I)
  • Delivers the listed 1,098 MHz maximum clock capability with a 0.95 V to 1.05 V core range (对比 XC7A200T-2SBG484I)

设计说明

Use the manufacturer power-estimation workflow with the final utilization report, clock activity, and I/O standards rather than relying on logic-cell count alone. The XC7A200T-1SBG484I core operates from 0.95 V to 1.05 V, so rail regulation and transient response are critical. Follow the recommended decoupling and power-rail sequencing in the Artix-7 data sheet, and verify droop during simultaneous high-speed I/O and core activity.

The 19 mm x 19 mm lidless FCBGA conducts heat through its solder balls and board copper, making the PCB thermal design part of the device thermal strategy. Spread the power and ground connections as directed in the package guidance and use a multilayer board with a solid ground plane where possible. Perform post-layout thermal simulation at the highest expected ambient temperature before fixing the enclosure airflow and heat-sinking strategy.

Start the layout from the AMD SBG484 package pinout files and UG475 rather than a generic BGA drawing. Confirm configuration pins, clock-capable pins, bank power, dedicated I/O, and all NC or reserved balls against the exact device and package combination. Preserve the recommended ball and escape geometry, then validate high-speed interfaces with the Vivado implementation timing report after routing.

Clock, memory, and high-speed I/O routing must use the voltage and topology specified for the selected Artix-7 speed grade. Route clocks on dedicated layers where practical, provide continuous reference-plane return paths, and avoid stubs on high-speed nets. Because SBG484, SB484, and FBG484 ordering codes can appear together in cross-reference lists, verify the exact package pinout file for the orderable MPN before releasing a PCB.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The I suffix identifies the industrial-temperature ordering option, not AEC-Q100 qualification. Compliance declarations are not stated in the retrieved product records and must be confirmed from the current manufacturer product documentation.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

xc7a200t 1sbg484i xc7a200t-1sbg484i datasheet xc7a200t board xc7a200t datasheet xc7a200t development board xc7a200t price xc7a200t fpga xc7a200t 2fbg484i xc7a200t 2sbg484i xc7a200t 1ffg1156i XC7A200T-1SBG484I pinout XC7A200T-1SBG484I replacement AMD XC7A200T-1SBG484I

相关元器件 & 术语

AMD Xilinx XC7A200T-1SBG484I XC7A200T-2SBG484I XC7A200T-L1SBG484I XC7A200T-1SB484I XC7A200T-1FBG484I XC7A200T-2FBG484I Artix-7 field-programmable gate array FPGA programmable logic block RAM 215,360 logic cells 285 I/O 28 nm process technology SBG484 FCBGA lidless flip-chip ball grid array surface mount UG475 Vivado industrial automation robotics embedded vision data acquisition
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情