XC7A35T-2FT256I - 33,280-LCell Artix-7 FPGA | AMD/Xilinx
料号： XC7A35T-2FT256I ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $15.7151 | $15.72 |
| 10 | $15.7151 | $157.15 |
| 100 | $15.7151 | $1,571.51 |
| 500 | $15.7151 | $7,857.55 |
| 1,000 | $15.7151 | $15,715.10 |
XC7A35T-2FT256I 概述
An FPGA is a reconfigurable semiconductor whose interconnect and logic are defined by a bitstream rather than fixed circuitry. Artix-7 devices occupy the low-cost, low-power portion of the AMD/Xilinx 7-series portfolio and target compact systems requiring substantial parallel processing without the cost and power of larger high-end devices. This places the XC7A35T above a basic programmable-logic device and below larger Artix-7 members in resource capacity.
The verified listing identifies 33,280 logic cells, 1,800 Kb of block RAM, 90 DSP slices, 170 I/O, and a 256-LBGA package for the closely identified XC7A35T-2FTG256I listing. Those values position the device for moderate control logic, parallel datapaths, embedded memory, video or image preprocessing, sensor fusion, and communications control. The search data does not explicitly state the target suffix's exact temperature limits, supply rails, maximum clock, or package dimensions, so those values remain marked for verification rather than being inferred.
At the system level, the programmable fabric supports parallel datapaths that would require many discrete logic devices, while 90 DSP slices can accelerate multiply-accumulate operations. The 1,800 Kb block RAM provides on-chip storage for buffering, lookup tables, packet queues, and data acquisition. The 170 I/O allow interfaces to external memory, converters, transceivers, displays, and industrial peripherals, subject to the exact bank voltage, pin multiplexing, and I/O-standard constraints listed in the manufacturer documentation.
The XC7A35T-2FT256I is suitable for industrial automation, test and measurement, communications infrastructure, embedded vision, and compact edge-processing systems. A board-level migration must preserve the 256-ball footprint, pin functions, supported I/O standards, power rails, configuration interface, memory interface requirements, clocking, and bitstream compatibility. Even when a distributor describes two orderable suffixes as similar, engineers should verify the exact package and temperature suffix before purchasing.
A sound design starts with the AMD package pinout files and the Artix-7 documentation, followed by Vivado design constraints and timing analysis. Validate every power rail, decoupling network, configuration scheme, pin placement, and high-speed interface against the exact device suffix. Treat tool-generated timing and utilization results as design-specific measurements rather than guaranteed device specifications.
This page consolidates verified source links, exposed uncertainty, pricing context, and engineering-oriented selection guidance. It adds migration and design-risk context beyond a distributor listing while avoiding unverified claims about electrical limits, lifecycle status, compliance, or package pin names.
直接替换替代料： XC7A35T-2FT256I ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： XC7A35T-2FT256I （相同外形与封装尺寸） ——差异在于 Block RAM, Logic Cells, Mounting Type, Package, Temperature Grade.
快速对比工具——选择替代料号进行并排对比：
XC7A35T-2FTG256I
✅ 直接替换✓ 有现货
$31.1719 / 个
查看数据手册 →XC7A35T-2FTG256C
✅ 直接替换📋 参考替代料（不在目录中）
XC7A35T-2FT256I 最大额定值与电气特性
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 33,280 cells |
| DSP Slices | 90 slices |
| Block RAM | 1,800 Kbit |
| I/O Count | 170 I/O |
| 封装 | 256-ball FTBGA (256-LBGA) |
| Performance Grade | -2 |
| Temperature Grade | Industrial |
| Process Technology | 28 nm |
| FPGA Family | Artix-7 |
| Programmable Logic | FPGA configurable logic fabric |
| Embedded Memory | Block RAM |
| Digital Signal Processing | 90 DSP slices |
| 安装类型 | Surface-mount ball grid array |
| Supplier Inventory Statement | In stock as of 2026-10-21 |
| Listed Unit Price | $15.7151 USD as of 2026-10-21 |
XC7A35T-2FT256I 256-ball ftbga (256-lbga) 引脚配置指南
XC7A35T-2FT256I（256-ball ftbga (256-lbga) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： XC7A35T-2FT256I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC7A35T-2FT256I 适用于 6 应用s: Industrial Automation Controller, Test and Measurement Instrumentation, Embedded Vision Preprocessor, Communications Preprocessing, Sensor Fusion and Data Acquisition, Educational FPGA Platform.
Industrial Automation Controller
The XC7A35T-2FT256I fits compact automation controllers because it combines 33,280 programmable logic cells, 170 I/O, 90 DSP slices, and 1,800 Kb of block RAM. Parallel logic can coordinate sensors, actuators, timing, communication protocols, and motion-control datapaths without splitting the design among several discrete processors. Industrial programming is handled by the I temperature suffix, although the exact limits must be checked for the selected package. Place external memory, isolated interfaces, and transceivers around the FPGA while using Vivado constraints to verify every bank voltage and timing path. This device is most appropriate when utilization remains comfortably below its totals and deterministic parallel control is more valuable than adding a separate microcontroller.
推荐
Test and Measurement Instrumentation
The Artix-7 fabric is well suited to acquisition and timing control in test equipment because 33,280 logic cells can implement parallel state machines while 1,800 Kb of block RAM buffers samples or control sequences. The 170 I/O provide interfaces for converters, trigger logic, front-panel controllers, and communication transceivers. A typical design would capture multiple ADC channels, align timing, perform preliminary filtering, and transfer results to a host interface. Vivado implementation must confirm routing margins at the intended clock rates, and the board must separate sensitive analog and digital return paths. Exact converter interfaces and voltage rails require device-level verification because they are not present in the supplied source data.
推荐
Embedded Vision Preprocessor
The XC7A35T-2FT256I can implement the parallel stages between an image sensor and a host or display pipeline. Its 33,280 logic cells support timing generation and pixel-format conversion, 90 DSP slices support filters or fixed-point arithmetic, and 1,800 Kb of block RAM can support line or tile buffering. The 170 I/O give designers access to sensor, display, and communications interfaces, subject to bank-specific VCCO and timing constraints. Engineers should prototype the pixel pipeline in Vivado and verify bandwidth against the camera's resolution and frame rate. For substantially larger images or heavier convolution workloads, migrate to a larger Artix-7 member rather than relying on nominal resource totals.
推荐
Communications Preprocessing
The FPGA's programmable fabric and 1,800 Kb of block RAM make XC7A35T-2FT256I useful for packet buffering, framing, CRC generation, filtering, and interface conversion. Its 170 I/O can support parallel buses or serializer links when the selected bank voltage and I/O standards permit them. A practical design would terminate data from a communications transceiver, align it to the internal clock domain, apply protocol-specific checks, and transfer valid frames through a host interface. Implementation must be constrained and timing-analyzed for the actual link rate because the verified data does not specify maximum clocks or transceiver counts. The device is best where low deterministic latency justifies programmable hardware.
推荐
Sensor Fusion and Data Acquisition
XC7A35T-2FT256I can combine sensor timing, parallel sampling, filtering, and protocol formatting on one programmable device. The 90 DSP slices provide hardware resources for multiply-accumulate operations, while 1,800 Kb of block RAM can hold sample windows and intermediate results. Its 170 I/O allow connection to ADC outputs, digital sensors, clocks, and communications circuitry, provided the designer selects compatible I/O standards and bank supply rails. For inertial, vibration, or industrial monitoring, designers can use parallel datapaths to reduce processor load and preserve deterministic timing. Power integrity, decoupling, grounding, and exact temperature limits must be validated from the manufacturer documentation before deployment.
推荐
Educational FPGA Platform
The XC7A35T-2FT256I offers enough logic, DSP, RAM, and I/O for instruction, robotics, and digital-design projects that exceed small CPLDs. Students can implement processors, finite-state machines, waveform generators, serial links, and small accelerator examples while learning constraint-driven Vivado workflows. Its 256-ball package demands careful PCB layout, but development boards can remove much of the high-density BGA risk. Resource planning should leave headroom for debug logic and project expansion, and timing closure should be checked after every major architecture change. Before purchasing, confirm that the board exposes the exact package pins, configuration interface, power rails, clocking, and I/O standards required by the intended projects.
推荐
推荐产品汇总
工程参考数据： XC7A35T-2FT256I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC7A35T-2FTG256I | XC7A35T-2FTG256C |
|---|---|---|---|
| Brand | AMD/Xilinx | AMD/Xilinx | AMD/Xilinx |
| Package | 256-ball FTBGA/256-LBGA | 256-ball FTBGA/256-LBGA | 256-ball FTBGA/256-LBGA |
| Performance Grade | -2 | -2 | -2 |
| Temperature Grade | Industrial I grade | Industrial I grade | Commercial C grade |
关键差异点
- Verified resource set supports moderate parallel processing （对比 XC7A35T-2FTG256C)
- Industrial temperature ordering aligns with automated equipment （对比 XC7A35T-2FTG256C)
- The -2 performance grade is consistent across the related order codes （对比 XC7A35T-2FTG256C)
设计说明
Normalize the complete ordering string before release. Search results prominently list XC7A35T-2FTG256I while the requested part is XC7A35T-2FT256I, and those strings are not interchangeable without an authoritative ordering-code explanation. Compare the manufacturer ordering guide, device name, package code, speed grade, temperature code, lot marking, and footprint before prototype procurement. A distributor similarity result is not proof of pin-to-pin equivalence.
Do not assign supply voltages or decoupling values from memory because the exact rails, tolerances, and current limits were not supplied. Use the exact Artix-7 data sheet and board-design guidance to identify core, auxiliary, I/O, and configuration supplies. Place required bulk and high-frequency decoupling at the associated power balls, provide clean power sequencing, and validate the rails under worst-case logic, RAM, DSP, and I/O activity before release.
A 256-ball BGA requires escape routing, via-in-pad or via-adjacent fanout, layer-transition planning, and careful return-path continuity. AMD's official package-pinout page provides downloadable device files and points users to the package-file format documentation. Match ball assignments to the exact orderable suffix, preserve package outline and land pattern tolerances, and inspect assembly constraints rather than treating all FTG256 variants as automatically identical.
Bank-level I/O standards and timing depend on the exact device documentation. Constrain every external interface in Vivado, include board-level uncertainty, and validate source-synchronous, clocked, and high-speed serial paths with the intended PCB models. Do not infer maximum clocks, differential I/O availability, or drive strength from the 170-I/O count; those properties vary by bank, package pin, voltage, and selected standard.
合规信息
The supplied search results do not explicitly establish compliance for XC7A35T-2FT256I. Related product pages and comparison snippets mention RoHS or REACH, but those claims were not transferred without exact authoritative data.
