AMD

XC7Z010-L1CLG400I - Dual-Core ARM Cortex-A9 SoC | AMD

料号: XC7Z010-L1CLG400I ✓ 量产中
400-CSPBGA Package 667 MHz Speed
最小起订量: 1 |

XC7Z010-L1CLG400I 概述

The AMD XC7Z010-L1CLG400I is a programmable Zynq-7000 system on chip integrating a dual-core ARM Cortex-A9 MPCore processor with an Artix-7 FPGA fabric, 28K logic cells, and a 667 MHz processor operating frequency in a 400-CSPBGA package measuring 17 mm by 17 mm. CoreSight debug support and programmable-system-on-chip architecture place it within the FPGA and SoC integration category.

A system on chip, or SoC, combines a hard processor subsystem with programmable logic and shared interfaces on one device. In the Zynq-7000 hierarchy, the ARM Cortex-A9 subsystem executes operating-system and application software, while the Artix-7 FPGA fabric implements parallel hardware, custom peripherals, signal processing, or real-time control functions. This integration reduces the number of discrete devices and allows software-controlled hardware accelerators to exchange data with the processor system.

The XC7Z010-L1CLG400I provides 28K FPGA logic cells and 667 MHz ARM processing in one package. The dual-core Cortex-A9 configuration supports parallel operating-system workloads, while CoreSight provides integrated debug visibility. A 256 KB RAM block is associated with the device in the Zynq-7000 product family. The 400-CSPBGA package offers a high pin count suitable for exposing processor, FPGA, memory, and high-speed I/O resources.

The device combines a hard ARM Cortex-A9 processing subsystem with an Artix-7 FPGA fabric rather than implementing the processor entirely in programmable logic. This architecture allows deterministic hardware blocks to run concurrently with software workloads. High-speed memory-mapped interfaces connect the processor to FPGA fabric, enabling functions such as hardware-assisted filtering, protocol handling, data acquisition, and control when supported by the selected design tools and device configuration.

Typical uses include industrial control, machine vision, communications infrastructure, test and measurement, embedded networking, and sensor-processing systems. The ARM processor can manage operating-system tasks and device control, while the FPGA fabric accelerates parallel logic. In a camera-based inspection system, for example, programmable logic can acquire and pre-process image data while the processor performs higher-level analysis and communications.

PCB design requires careful attention to the 400-ball package, multilayer-routing rules, power integrity, and high-speed differential signals. Use the manufacturer package pinout files and the applicable Zynq-7000 design guidance when assigning balls and planning power, ground, clock, and I/O connections. Configuration, programming interfaces, decoupling, and board-level test access should be validated in the Vivado design flow before fabrication.

This page combines the device architecture, package information, drop-in candidates, application guidance, and practical design considerations. The comparison tables and migration notes are intended to shorten engineering evaluation while preserving the need for package, timing, resource, and temperature-grade verification before any replacement is approved.

直接替换替代料: XC7Z010-L1CLG400I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: XC7Z010-L1CLG400I (相同外形与封装尺寸) ——差异在于 Package, Device Type, FPGA Logic Cells, Processor Core, Package Dimensions.

AMD
Package: 400-CSBGA
FPGA Logic Cells: 28,000 cells
Processor Core: Dual Arm Cortex-A9 MPCore
对比 XC7Z010-L1CLG400I →
AMD
Device Type: Zynq-7000 SoC with Artix-7 programmable logic
Package Dimensions: 17 x 17 mm
对比 XC7Z010-L1CLG400I →
AMD
Package: 400-CSPBGA (17 x 17 mm)
Processor Core: Dual ARM Cortex-A9 MPCore
对比 XC7Z010-L1CLG400I →
AMD
Device Type: Zynq-7000 system-on-chip with Artix-7 FPGA logic
FPGA Logic Cells: 85K logic cells
Processor Core: Dual Arm Cortex-A9 MPCore
对比 XC7Z010-L1CLG400I →

XC7Z010-1CLG400I

✅ 直接替换
📦 400-CSPBGA
兼容规格

联系询价

XC7Z010-1CLG400C

✅ 直接替换
AMD
📦 400-CSPBGA
Zynq-7000 All Programmable System on Chip · Dual Arm Cortex-A9 MPCore · 667 MHz · 28,000 cells · 35,200 registers · 60 block RAMs · 240 Kbit · 80 multipliers (18x25)

联系询价

查看数据手册 →

XC7Z010-2CLG400I

✅ 直接替换
AMD
📦 400-CSPBGA
Zynq-7000 adaptive system-on-chip · Dual ARM Cortex-A9 MPCore · Artix-7 FPGA · 28K · 766 MHz · CoreSight · 400-CSPBGA (17 x 17 mm) · 400 balls

联系询价

查看数据手册 →

XA7Z010-1CLG400I

✅ 直接替换
📦 400-CSPBGA
Same 28K logic cells, 667 MHz dual Cortex-A9 configuration, and CLG400 package; automotive-family qualification changes the regulatory and temperature requirements.

📋 参考替代料(不在目录中)

XC7Z020-1CLG400I

✅ 直接替换
AMD
📦 400-CSPBGA
Zynq-7000 system-on-chip with Artix-7 FPGA logic · Dual Arm Cortex-A9 MPCore · 667 MHz · 85K logic cells · CoreSight · 400-CSPBGA · 17 x 17 mm · 400 pins

联系询价

查看数据手册 →

XC7Z010-L1CLG400I 最大额定值与电气特性

Device Type Zynq-7000 programmable system on chip
Processor Core Dual-core ARM Cortex-A9 MPCore
Processor Frequency 667 MHz
FPGA Family Artix-7
FPGA Logic Cells 28K logic cells
On-Chip RAM 256 KB
Debug Support CoreSight
封装 400-CSPBGA
Package Body Size 17 mm x 17 mm
Package Pin Count 400 balls
安装类型 Surface mount
RoHS 状态 unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

XC7Z010-L1CLG400I 400 balls 引脚配置指南

XC7Z010-L1CLG400I(400 balls 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XC7Z010-L1CLG400I 的 400 balls 封装引脚图

暂无详细引脚数据: XC7Z010-L1CLG400I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XC7Z010-L1CLG400I 适用于 6 应用s: Industrial Machine Control, Machine Vision and Inspection, Industrial Communications Gateway, Test and Measurement Equipment, Sensor Processing and Edge IoT, Embedded Security and Surveillance.

🏭

Industrial Machine Control

The XC7Z010-L1CLG400I is suitable for machine-control systems that must coordinate real-time I/O with higher-level operating-system functions. Its dual-core ARM Cortex-A9 subsystem operates at 667 MHz and can run control, diagnostics, communications, and supervisory logic, while the 28K-cell Artix-7 fabric can implement deterministic timing, pulse generation, or parallel condition-monitoring circuits. Using both processors and programmable logic in one 400-CSPBGA device can reduce inter-chip communication compared with a discrete processor-plus-FPGA architecture. The design must still validate logic utilization, available user I/O, power sequencing, and the exact industrial temperature grade against the enclosure and process conditions.

📺

Machine Vision and Inspection

The XC7Z010-L1CLG400I can divide a machine-vision pipeline between FPGA logic and the dual ARM Cortex-A9 processor. The Artix-7 fabric's 28K logic cells can support parallel image preprocessing, pixel formatting, thresholding, or data capture, while the 667 MHz processor handles control flow, classification, storage management, and factory-network communication. Combining these functions on one SoC can reduce data movement between separate devices and simplify system integration. The exact camera interface, line rate, image buffer, and I/O requirement must fit within the device's available resources, and board-level signal integrity should be evaluated with the selected sensor and connector.

🌐

Industrial Communications Gateway

The XC7Z010-L1CLG400I fits gateways that combine protocol processing with a hosted operating system. The dual-core ARM Cortex-A9 processor at 667 MHz can manage network stacks, routing, security services, and configuration, while the Artix-7 FPGA fabric can accelerate packet handling or implement specialized serial interfaces. The 400-CSPBGA package provides extensive ball access for memory, Ethernet PHY interfaces, and other external connectivity. A production design should check the exact supported memory interfaces, I/O count, transceiver requirements, and thermal conditions. Configuration must use the AMD toolchain and device settings validated for the CLG400 package before release.

🔧

Test and Measurement Equipment

The XC7Z010-L1CLG400I is appropriate for test equipment that needs flexible acquisition logic alongside an embedded control processor. Programmable logic can implement timing units, trigger logic, counters, and parallel data paths, while the dual Cortex-A9 cores handle instrument control, analysis, calibration, and user interfaces. Its 28K logic cells provide enough FPGA resources for compact embedded instruments, although complex multichannel designs may require a larger Zynq device. The design should account for analog front-end settling, clock jitter, external memory behavior, and signal termination. Use the package pinout files and timing-constrained Vivado project to verify every high-speed interface.

🧩

Sensor Processing and Edge IoT

The XC7Z010-L1CLG400I can serve as an edge-processing node when sensors produce data faster or more deterministically than software alone can handle. The 28K-cell FPGA fabric can filter, count, correlate, or buffer sensor streams, while the 667 MHz dual-core ARM subsystem applies higher-level analytics and manages connectivity. A single-package implementation may reduce board area compared with separate MCU and FPGA arrangements, although the 400-CSPBGA still requires multilayer PCB design. Validate sensor timing, I/O voltage compatibility, memory capacity, and the device's power budget. Secure boot, peripheral configuration, and application deployment should also be planned within the Zynq software-development workflow.

🎥

Embedded Security and Surveillance

The XC7Z010-L1CLG400I supports embedded surveillance designs that require simultaneous video processing and system control. Programmable logic can perform motion detection, pixel-domain filtering, or trigger generation, while the dual-core ARM Cortex-A9 processor manages storage, network communication, device identity, and application services. Integrating the processor and 28K-cell FPGA fabric on one SoC can reduce duplicated interfaces and accelerate parallel video tasks. The specific camera resolution, frame rate, codec complexity, and storage bandwidth determine whether the XC7Z010 is sufficient; larger designs may move to XC7Z020. Validate thermal performance, confidentiality requirements, boot behavior, and long-term availability for the chosen ordering code.

What are the key specifications of XC7Z010-L1CLG400I that engineers should know?
The XC7Z010-L1CLG400I integrates a dual-core ARM Cortex-A9 MPCore processor, an Artix-7 FPGA fabric with 28K logic cells, and CoreSight debug support. The processor operates at 667 MHz, and the device includes 256 KB RAM in a 400-CSPBGA package measuring 17 mm by 17 mm. According to the AMD Zynq-7000 data sheet, these resources support concurrent software-controlled control logic and programmable hardware acceleration on one device.
Where can I download the XC7Z010-L1CLG400I datasheet PDF?
The official AMD Zynq-7000 data sheet is available from the AMD documentation URL listed on this page. It covers the XC7Z010 and XC7Z020 families, including DC and AC switching characteristics. The AMD package-device pinout resources also provide package files in TXT and CSV formats. Use the full ordering code XC7Z010-L1CLG400I when selecting speed, temperature, package, and other ordering options within the family documentation.
Where can I find the XC7Z010-L1CLG400I pinout?
The AMD Zynq-7000 package-device pinout page provides the official package files in TXT and CSV formats, with the file format described by UG865. The XC7Z010-L1CLG400I uses the 400-CSPBGA, 17 mm by 17 mm package. Use the package file corresponding to CLG400 when assigning balls, power planes, clock connections, and I/O assignments. The generic package illustration on this page is not a substitute for the complete manufacturer ball map.
Is the XC7Z010-L1CLG400I a processor, an FPGA, or an SoC?
The XC7Z010-L1CLG400I is a Zynq-7000 system on chip that combines both a processor and programmable logic. Its hard processor subsystem contains a dual-core ARM Cortex-A9 MPCore running at 667 MHz, while its Artix-7 fabric provides 28K logic cells. The SoC category matters because software running on the ARM subsystem can control or accelerate functions implemented in the FPGA fabric.
What is the XC7Z010-L1CLG400I suitable for?
The XC7Z010-L1CLG400I suits embedded systems that need both deterministic programmable logic and an ARM operating-system processor. Typical uses include industrial control, machine vision, communications, test and measurement, embedded networking, and sensor processing. Its dual Cortex-A9 cores can handle control software while the 28K-cell Artix-7 fabric implements parallel acquisition, filtering, protocol, or custom accelerator functions.
What is the difference between XC7Z010-L1CLG400I and XC7Z010-1CLG400I?
Both devices use the same XC7Z010 Zynq-7000 architecture, dual-core ARM Cortex-A9 configuration, 28K logic cells, 667 MHz processor rating, and 400-CSPBGA package. Their ordering codes differ in the L1 versus -1 designation, so engineers should verify the exact speed, temperature, and product-lifecycle terms against the AMD ordering guide. For a board-level substitution, confirm the approved ordering table, electrical limits, and package files rather than relying on the abbreviated family name alone.
Can XC7Z010-2CLG400I replace XC7Z010-L1CLG400I?
The XC7Z010-2CLG400I uses the same XC7Z010 device family and CLG400 package, making it a candidate for migration review. It is not automatically approved as a drop-in replacement because the -2 ordering code represents a different performance-grade position from the target's L1 grade, with temperature qualification also requiring review. Confirm processor performance, operating-temperature limits, power characteristics, and FPGA timing before substituting the part in production hardware.
Is XC7Z010-1CLG400I a direct replacement for XC7Z010-L1CLG400I?
The XC7Z010-1CLG400I is a close same-family candidate with a dual-core ARM Cortex-A9 MPCore subsystem, 28K logic cells, 667 MHz processor rating, and the same 400-CSPBGA package. The apparent functional and package match is strong, but engineers should verify the L1 and -1 ordering terms, temperature grade, lifecycle status, and exact ordering code before approving it as a drop-in production replacement.
When should I choose XC7Z010-L1CLG400I over a larger Zynq-7000 device?
Choose XC7Z010-L1CLG400I when the design fits within its 28K Artix-7 logic cells and does not require the additional fabric resources of a larger member such as XC7Z020. The device already combines dual Cortex-A9 cores, programmable hardware, DMA-capable processing, and CoreSight debugging. Choose a larger Zynq only when logic utilization, memory-interface demands, I/O requirements, or performance targets exceed the XC7Z010 resources.
Is XC7Z010-L1CLG400I suitable for industrial control and machine vision?
The XC7Z010-L1CLG400I fits industrial control and machine-vision designs that combine parallel hardware processing with an ARM operating-system environment. The 28K logic-cell fabric can implement time-critical acquisition or pre-processing, while the 667 MHz dual-core Cortex-A9 subsystem supports control, communications, and higher-level analysis. Confirm the device's exact temperature grade, available I/O, power budget, and camera-interface requirements for the deployed enclosure.
What is the best AMD equivalent for XC7Z010-L1CLG400I?
The closest same-family starting point is the AMD XC7Z010-1CLG400I because both combine a dual Cortex-A9 processor, 28K logic cells, and the CLG400 package. Other XC7Z010 speed, grade, and automotive ordering variants can be evaluated when their qualification and temperature requirements differ. No cross-brand drop-in equivalent is established because the device integrates proprietary FPGA resources, processor configuration, memory interfaces, and a complex 400-ball package.
What can replace XC7Z010-L1CLG400I?
Possible replacements include the AMD XC7Z010-1CLG400I, XC7Z010-1CLG400C, XC7Z010-2CLG400I, XA7Z010-1CLG400I, and XC7Z020-1CLG400I, subject to qualification and design review. Each candidate uses the CLG400 package, but speed grade, temperature grade, qualification, resource capacity, and software support may differ. Treat the list as migration candidates rather than unconditional substitutions until timing, power, lifecycle, and pin-level compatibility have been verified.
Where can I buy XC7Z010-L1CLG400I online?
Use the Request a Quote form on this page to request XC7Z010-L1CLG400I availability, unit pricing, and current lead time. The exact ordering code identifies the AMD 400-CSPBGA Zynq-7000 device with the L1CLG400I qualification. For production planning, request the manufacturer-supported lifecycle state, quantity schedule, date codes, and traceability information along with the commercial quotation.
What is the price of XC7Z010-L1CLG400I?
Use the Request a Quote form on this page for a current XC7Z010-L1CLG400I unit quotation and volume breaks. Pricing for this programmable SoC can vary with quantity, date code, lifecycle status, and supply condition, so a static figure is not appropriate for budgeting. The quote request can also capture requested package quantity, target delivery date, shipping location, and any required inspection or traceability documentation.
What is the lead time for XC7Z010-L1CLG400I and is it in stock?
Request the current XC7Z010-L1CLG400I stock position and lead time through the Request a Quote form on this page. Distributor listing text indicates that the device was advertised with immediate shipment at the time of the product-page search, but inventory is time-sensitive and should not be treated as a guaranteed allocation. A firm quotation should confirm quantity, factory lead time, backorder status, and the expected ship date.
How should power, clocking, and decoupling be designed for XC7Z010-L1CLG400I?
Implement separate supply rails and place the manufacturer-recommended bypass capacitance close to each applicable power ball. Keep the processor, FPGA, I/O, and auxiliary supply connections within their specified limits, and provide a clean clock source with controlled impedance. Because the device contains both a hard processor system and programmable logic, verify power sequencing, startup behavior, and rail droop in the AMD design guidance before fabrication.
Is XC7Z010-L1CLG400I RoHS, REACH, or AEC-Q100 compliant?
The RoHS, REACH, halogen-free, lead-free, and conflict-minerals status of the exact XC7Z010-L1CLG400I ordering code is not established by the product-page information available for this listing. The standard XC7Z010 device is an FPGA and SoC rather than an AEC-Q100 automotive-qualified product. Obtain the current AMD environmental and product-compliance documents for the exact ordering code before making a compliance declaration.

工程参考数据: XC7Z010-L1CLG400I ——对比、设计指导和合规信息。

选型指南

Choose XC7Z010-L1CLG400I when a design needs a dual-core 667 MHz ARM Cortex-A9 subsystem, an Artix-7 fabric with 28K logic cells, CoreSight debugging, and a 400-CSPBGA package without the resource overhead of a larger Zynq member. Select XC7Z010-1CLG400I when its exact ordering terms and qualification align with the target requirements. Consider XC7Z010-2CLG400I for a different performance-grade position after timing and power review, and XC7Z010-1CLG400C only when its grade meets the deployment requirements. Use XA7Z010-1CLG400I when the automotive-oriented family qualification is required. XC7Z020-1CLG400I is the appropriate capacity-expansion path when the design exceeds the target's 28K logic cells. Regardless of the ordering code, approve a replacement only after checking the AMD package map, electrical limits, timing, power, temperature, and software constraints.

与替代料对比

参数 本产品 XC7Z010-1CLG400I XC7Z010-1CLG400C XC7Z010-2CLG400I XA7Z010-1CLG400I XC7Z020-1CLG400I
Brand AMD AMD AMD AMD AMD AMD
Package 400-CSPBGA 400-CSPBGA 400-CSPBGA 400-CSPBGA 400-CSPBGA 400-CSPBGA
Processor Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore
Processor Frequency 667 MHz 667 MHz 667 MHz Not stated 667 MHz Not stated
FPGA Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
FPGA Logic Cells 28K logic cells 28K logic cells 28K logic cells 28K logic cells 28K logic cells Greater capacity than 28K logic cells
Debug Support CoreSight CoreSight CoreSight CoreSight CoreSight CoreSight
On-Chip RAM 256 KB 256 KB 256 KB 256 KB 256 KB Not stated
Ordering Qualification L1CLG400I -1CLG400I -1CLG400C -2CLG400I XA automotive-family ordering code XC7Z020-1CLG400I
Package Body Size 17 mm x 17 mm 17 mm x 17 mm 17 mm x 17 mm 17 mm x 17 mm 17 mm x 17 mm 17 mm x 17 mm

关键差异点

  • Combines ARM software execution and Artix-7 programmable logic in one SoC (对比 XC7Z020-1CLG400I)
  • Closest ordering-code match within the XC7Z010 CLG400 family (对比 XC7Z010-1CLG400I)
  • Maintains the same package and core device family while offering a different qualification path (对比 XA7Z010-1CLG400I)
  • Same CLG400 migration platform without the XC7Z020 capacity increase (对比 XC7Z020-1CLG400I)

设计说明

Assign the 400-CSPBGA connections directly from the AMD CLG400 package files in TXT or CSV format. Separate processor, FPGA I/O, auxiliary, and memory-interface supplies into their specified power domains, then connect each domain to the required plane through the placement and decoupling network defined in the AMD design guidance. Avoid substituting a generic BGA escape pattern because the XADC, configuration pins, clock inputs, and high-speed I/O have prescribed connection and decoupling requirements.

Use the package ball assignments and device-speed designation when constraining the design in Vivado. The target uses an L1 ordering position, while related devices use -1, -2, C, I, or automotive-family codes; changing only the ordering code may alter timing, power, temperature, or qualification assumptions. Complete post-route timing analysis for every clock domain and peripheral interface, and avoid treating the 667 MHz processor figure as a substitute for FPGA fabric timing analysis.

Plan the power tree for simultaneous processor, memory, and programmable-logic activity rather than the processor's 667 MHz clock alone. Follow the manufacturer guidance for supply sequencing, rail ramp limits, bypass-capacitor placement, and power-source impedance. Estimated system dissipation must be calculated from the selected Vivado utilization and operating activity because the 28K-cell fabric and external memory activity can materially affect total demand. Validate the result across startup, idle, processing, and worst-case logic activity.

Do not approve a migration solely because two devices use the CLG400 package. Compare the complete ordering codes, processor and memory subsystem, FPGA resources, I/O standards, power characteristics, operating-temperature grade, qualification, software constraints, and lifecycle state. The AMD package-device pinout files and UG865 provide the authoritative package data, while timing must be re-established for the new target device in the Vivado project.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance must be confirmed from current AMD documentation for the exact XC7Z010-L1CLG400I ordering code. The XA7Z010 family is considered separately for automotive qualification.

相关搜索

xc7z010 datasheet xc7z010 1clg400i xc7z010 1clg400c xc7z010 2clg400i xc7z010 1clg225c xc7z010 1clg225i xc7z010 1clg400c datasheet xc7z010 2clg225i xc7z010 1clg400i datasheet XC7Z010-L1CLG400I pinout XC7Z010-L1CLG400I equivalent XC7Z010-L1CLG400I replacement XC7Z010-L1CLG400I price AMD XC7Z010-L1CLG400I

相关元器件 & 术语

AMD XC7Z010-L1CLG400I XC7Z010-1CLG400I XC7Z010-1CLG400C XC7Z010-2CLG400I XA7Z010-1CLG400I XC7Z020-1CLG400I Zynq-7000 Artix-7 ARM Cortex-A9 MPCore system on chip SoC programmable logic FPGA CoreSight 400-CSPBGA BGA family surface mount 28K logic cells 667 MHz 256 KB RAM machine vision industrial control UG865
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情