XMC1402Q048X0128AAXUMA1 48MHz Cortex-M0 MCU | Infineon
料号: XMC1402Q048X0128AAXUMA1 ✓ 量产中XMC1402Q048X0128AAXUMA1 概述
An ARM Cortex-M0 microcontroller is a reduced-instruction-set processor designed for deterministic embedded control. The Cortex-M0 core combines a simple architecture with a broad embedded software ecosystem, allowing designers to implement control loops, communication services, and supervisory functions without the complexity of a high-end application processor. Infineon positions the XMC1000 family within the broader hierarchy of embedded microcontroller, embedded processor, and semiconductor devices.
The XMC1402 device is specified for a 48 MHz maximum clock frequency, 128 KB of flash for program storage, and 16 KB of SRAM for working memory. Its operating voltage range is listed as 1.8 V to 5.5 V, making it suitable for embedded systems using common low-voltage rails. The PG-VQFN-48-73 package provides 48 leads plus an exposed thermal-pad feature described in the package documentation, supporting compact surface-mount PCB designs where a small footprint and thermal performance are important.
Infineon identifies the XMC1400 series as being optimized for motor control, power conversion, LED lighting, and human-machine interface applications. The MCU can therefore serve as the central controller in a digital power-conversion module, an industrial lighting controller, or a compact motor-control system. Its 32-bit architecture is suitable for managing multiple control functions, while the 48 MHz operating frequency provides additional timing margin for peripheral servicing and real-time control routines.
The principal design consideration is that software, memory size, and peripheral configuration must be checked against the final application requirements. Firmware development should use the appropriate Infineon device support and debugger workflow, while the board design should provide clean decoupling, a stable supply source, and adequate exposed-pad thermal relief. Confirm the exact peripheral set, electrical limits, and package drawing in the manufacturer documentation before releasing a production schematic.
This product page provides a consolidated view of the XMC1402Q048X0128AAXUMA1 identification, package, memory, core, and application positioning, together with practical sourcing and design guidance. It is intended to help engineers locate the correct datasheet, evaluate the device for embedded-control use, and plan a hardware design around the Infineon XMC1000 ecosystem.
直接替换替代料: XMC1402Q048X0128AAXUMA1 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XMC1402Q048X0128AAXUMA1 (相同外形与封装尺寸) ——差异在于 Architecture, Package, Product Type.
XMC1404Q048X0200AAXUMA1
✅ 直接替换联系询价
查看数据手册 →XMC1402Q048X0128AAXUMA1 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Series | XMC1000 |
| Core | ARM Cortex-M0 |
| Maximum CPU Frequency | 48 MHz |
| Program Memory | 128 KB flash |
| Program Memory Organization | 128K x 8 bits |
| RAM | 16 KB |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Architecture | 32-bit single-core |
| 封装 | PG-VQFN-48-73, 7 x 7 mm |
| 安装类型 | Surface mount |
| Application Orientation | Industrial |
| Primary Applications | Motor control, power conversion, LED lighting, and HMI |
| Core Count | 1 core |
| 数据总线宽度 | 32-bit |
| Flash Storage | 128 KB |
| RAM Storage | 16 KB |
| RoHS 状态 | Compliant |
XMC1402Q048X0128AAXUMA1 引脚配置
| 引脚 1 | [DATA_NEEDED: pin 1 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 2 | [DATA_NEEDED: pin 2 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 3 | [DATA_NEEDED: pin 3 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 4 | [DATA_NEEDED: pin 4 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 5 | [DATA_NEEDED: pin 5 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 6 | [DATA_NEEDED: pin 6 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 7 | [DATA_NEEDED: pin 7 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 8 | [DATA_NEEDED: pin 8 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 9 | [DATA_NEEDED: pin 9 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 10 | [DATA_NEEDED: pin 10 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 11 | [DATA_NEEDED: pin 11 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 12 | [DATA_NEEDED: pin 12 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 13 | [DATA_NEEDED: pin 13 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 14 | [DATA_NEEDED: pin 14 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 15 | [DATA_NEEDED: pin 15 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 16 | [DATA_NEEDED: pin 16 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 17 | [DATA_NEEDED: pin 17 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 18 | [DATA_NEEDED: pin 18 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 19 | [DATA_NEEDED: pin 19 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 20 | [DATA_NEEDED: pin 20 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 21 | [DATA_NEEDED: pin 21 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 22 | [DATA_NEEDED: pin 22 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 23 | [DATA_NEEDED: pin 23 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 24 | [DATA_NEEDED: pin 24 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 25 | [DATA_NEEDED: pin 25 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 26 | [DATA_NEEDED: pin 26 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 27 | [DATA_NEEDED: pin 27 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 28 | [DATA_NEEDED: pin 28 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 29 | [DATA_NEEDED: pin 29 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 30 | [DATA_NEEDED: pin 30 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 31 | [DATA_NEEDED: pin 31 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 32 | [DATA_NEEDED: pin 32 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 33 | [DATA_NEEDED: pin 33 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 34 | [DATA_NEEDED: pin 34 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 35 | [DATA_NEEDED: pin 35 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 36 | [DATA_NEEDED: pin 36 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 37 | [DATA_NEEDED: pin 37 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 38 | [DATA_NEEDED: pin 38 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 39 | [DATA_NEEDED: pin 39 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 40 | [DATA_NEEDED: pin 40 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 41 | [DATA_NEEDED: pin 41 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 42 | [DATA_NEEDED: pin 42 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 43 | [DATA_NEEDED: pin 43 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 44 | [DATA_NEEDED: pin 44 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 45 | [DATA_NEEDED: pin 45 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 46 | [DATA_NEEDED: pin 46 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 47 | [DATA_NEEDED: pin 47 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
| 引脚 48 | [DATA_NEEDED: pin 48 name] — Use the Infineon pin-description table for the exact PG-VQFN-48-73 assignment. |
典型应用
XMC1402Q048X0128AAXUMA1 适用于 6 应用s: Industrial Motor Control, Digital Power Conversion, LED Lighting Controller, Human-Machine Interface Controller, Industrial Sensor Node, Power-Supply Controller.
Industrial Motor Control
The XMC1402Q048X0128AAXUMA1 fits compact industrial motor-control systems that require deterministic embedded processing without a high-end application processor. Its 48 MHz ARM Cortex-M0 core provides timing headroom for control-loop execution, while 128 KB of flash accommodates control code, parameter handling, and diagnostic routines. The 16 KB of RAM supports working state for timers, communication services, and supervisory functions. Infineon identifies the XMC1400 series as optimized for motor control. The final design must confirm the required timer channels, PWM outputs, analog inputs, fault handling, and pin multiplexing against the manufacturer datasheet, then implement PCB grounding and decoupling appropriate to the motor-drive power stage.
推荐
Digital Power Conversion
The XMC1402Q048X0128AAXUMA1 is applicable to digital power-conversion modules where the controller must execute control algorithms, supervise power stages, and manage communications. The 48 MHz Cortex-M0 core is suited to embedded control tasks, and the 128 KB flash capacity provides room for control firmware, configuration data, and fault logging. Its 1.8 V to 5.5 V operating range supports integration with low-voltage digital rails. Infineon specifically identifies power conversion as an XMC1400 optimization target. Engineers should verify the required PWM and capture resources, analog measurement channels, safety behavior, and external power-stage timing before schematic release.
推荐
LED Lighting Controller
The XMC1402Q048X0128AAXUMA1 can serve as the control processor in an LED-lighting system that coordinates dimming, sequencing, current regulation, and external communications. Its 48 MHz core supports responsive peripheral handling, while 128 KB flash provides adequate space for lighting algorithms, configuration tables, and update functions. The XMC1400 family is explicitly optimized for LED lighting by Infineon, making the device relevant to both constant-current and multi-channel lighting designs. Before implementation, confirm that the chosen XMC1000 variant includes the required PWM outputs, analog interfaces, and communication resources, and validate thermal performance and switching layout in the complete power module.
推荐
Human-Machine Interface Controller
The XMC1402Q048X0128AAXUMA1 is suitable for the supervisory side of a compact human-machine interface, where it must process input events, update indicators, manage communications, and enforce operating logic. Its 32-bit Cortex-M0 architecture supports responsive event handling, and the 128 KB flash capacity is appropriate for embedded interface firmware and data structures. The PG-VQFN-48-73 package also helps reduce board area in space-constrained control panels. Infineon lists HMI among the XMC1400 optimization areas. The design review should confirm display and touch-interface requirements, communication peripherals, pin multiplexing, and startup behavior, with emphasis on decoupling and a stable low-voltage supply.
推荐
Industrial Sensor Node
The XMC1402Q048X0128AAXUMA1 can serve as the local controller in a compact industrial sensor node that acquires measurements, applies filtering, records operating state, and reports results over a communication interface. The 48 MHz Cortex-M0 core leaves performance margin for sampling routines and protocol processing, while 16 KB of RAM accommodates bounded working buffers and 128 KB of flash supports embedded firmware. Its 1.8 V to 5.5 V range allows integration with common embedded supply systems. Select the exact XMC1000 variant only after checking the required ADC, timer, and communication resources. PCB implementation should isolate sensitive analog routing and place decoupling capacitors close to the device supply pins.
推荐
Power-Supply Controller
The XMC1402Q048X0128AAXUMA1 is relevant to supervisory power-supply designs where firmware must coordinate operating modes, monitor faults, and report status. Its 48 MHz embedded core can execute control and communication routines, and the 128 KB flash provides space for sequencing logic, diagnostics, and configuration data. Infineon's positioning of the XMC1400 family for power conversion supports its use in compact industrial power modules. The actual suitability depends on the selected device's peripherals, so designers should verify PWM generation, analog monitoring, communication interfaces, and watchdog behavior. Use the exposed-pad layout and package thermal requirements to maintain reliable operation under expected switching and control workloads.
推荐
工程参考数据: XMC1402Q048X0128AAXUMA1 ——对比、设计指导和合规信息。
选型指南
Choose the XMC1404Q048X0200AAXUMA1 when the same general XMC family and package format are needed but firmware, communication stacks, or data tables require more program memory than 128 KB. Its 200 KB of flash provides 72 KB additional storage, subject to confirmation of pin and peripheral compatibility.
Do not select a cross-brand replacement solely because it uses an ARM Cortex-M0 core and a 48-pin VQFN. Microcontroller equivalence also requires matching power pins, ground, debug signals, analog functions, timers, communications, boot configuration, and package geometry. For production continuity, also verify lifecycle status, software support, qualification requirements, and exact ordering information before selecting a substitute.
与替代料对比
| 参数 | 本产品 | XMC1404Q048X0200AAXUMA1 |
|---|---|---|
| Package | PG-VQFN-48-73, 7 x 7 mm | PG-VQFN-48 |
| Brand | Infineon Technologies | Infineon Technologies |
| Flash Memory | 128 KB | 200 KB |
| Architecture | 32-bit single-core | 32-bit |
| Application Focus | Motor control, power conversion, LED lighting, and HMI | XMC1400-series embedded control |
关键差异点
- Lower flash capacity supports firmware-cost and design simplification (对比 XMC1404Q048X0200AAXUMA1)
- Defined industrial XMC1402 application positioning (对比 XMC1404Q048X0200AAXUMA1)
- Compact 48-lead VQFN implementation (对比 XMC1404Q048X0200AAXUMA1)
设计说明
Use the Infineon PG-VQFN-48-73 package drawing to define the land pattern, exposed-pad connection, and solder-mask clearance. Place the device's supply-decoupling capacitors close to the relevant power pins and provide a low-impedance return path beneath the package. The exposed pad should follow the manufacturer's thermal-pad guidance rather than being treated as an optional connection.
Design the supply for the documented 1.8 V to 5.5 V device range, including tolerance, startup, transient response, and peripheral current demand. Confirm the selected external regulator can meet the load and voltage requirements of the operating mode. Use separate local bypass paths for internal supply domains if the datasheet specifies separate pins, and verify the final design against all minimum and maximum voltage conditions.
Do not treat the XMC1402 family designation as a complete orderable MPN. Confirm the full XMC1402Q048X0128AAXUMA1 code, package, flash density, temperature grade, and delivery format before releasing the BOM. Likewise, do not assume that another XMC family member is interchangeable: check pin multiplexing, peripheral availability, debug connections, boot behavior, and firmware device configuration.
Separate sensitive analog or measurement routes from switching and high-current paths, especially in motor-control and power-conversion designs. Keep the microcontroller ground reference continuous and use the package ground and exposed-pad structure as the primary return path. Follow the manufacturer's recommended decoupling and signal-routing layout to limit switching noise, ground bounce, and timing disturbance at the 48 MHz operating rate.
合规信息
The LCSC product listing explicitly identifies the exact MPN as RoHS compliant. No complete REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration was established for this part.