XMC1404Q048X0200AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon
MPN: XMC1404Q048X0200AAXUMA1 ✓ ActiveXMC1404Q048X0200AAXUMA1 Overview
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The XMC1404 belongs to the XMC1000 family and the XMC1400 subfamily, combining the Arm Cortex-M0 processor architecture with embedded-control peripherals. This product hierarchy places it between general-purpose microcontrollers and specialized industrial controllers, providing deterministic embedded processing without requiring a larger application processor.
Three headline characteristics define its core capability: a 48 MHz Arm Cortex-M0 processor, 200 KB of program flash, and 16 KB of SRAM. The 200 KB flash provides room for control code, configuration data, and application logic, while the SRAM supports working memory and real-time control variables. Its 48-pin PG-VQFN package supports dense PCB layouts and includes an exposed-pad package option for thermal management.
The XMC1400 series is optimized for embedded motor-control and power-conversion workloads. Its mixed-signal and timing resources can be used to monitor control loops, operate power stages, and manage LED lighting systems. The manufacturer describes the series as suitable for industrial systems, low-cost embedded-control applications, and human-machine interfaces, providing a practical bridge between simple logic controllers and more complex Cortex-M designs.
Typical implementations include three-phase motor-control boards, DC and AC power-conversion systems, programmable LED-lighting controllers, and compact industrial HMI panels. For these applications, the 48 MHz processing rate supports timely control-loop execution, while 200 KB flash can accommodate firmware, lookup tables, and communication routines without immediately requiring external memory.
Board design should follow the Infineon XMC1400 datasheet for pin multiplexing, power pins, decoupling, clocking, and exposed-pad layout. Software should also follow the ordering-specific pin map: using the wrong package code can assign a peripheral signal to an incorrect physical pin even when the device family is otherwise compatible.
This product page combines the manufacturer part description, XMC1400-series technical details, package information, verified drop-in candidates, comparison parameters, and practical implementation guidance. It is intended to help engineers identify the correct MCU, confirm package compatibility, and plan PCB and firmware work with fewer board respins.
Drop-in alternatives for XMC1404Q048X0200AAXUMA1 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XMC1404Q048X0200AAXUMA1 (same form factor and footprint) — differing in Architecture, Package, Product Type.
XMC1404Q048X0200AAXTMA1
✅ Drop-In📋 Reference alternative (not in catalog)
XMC1404F064X0200AAXUMA1
✅ Drop-InContact for price
View Datasheet →XMC1404Q048X0200AAXUMA1 Maximum Ratings & Electrical Characteristics
| Product Type | 32-bit microcontroller |
| CPU Core | Arm Cortex-M0 |
| Maximum CPU Frequency | 48 MHz |
| Program Flash Memory | 200 KB |
| SRAM | 16 KB |
| Flash Organization | 200K x 8 bits |
| Architecture | 32-bit |
| Product Series | XMC1000 series, XMC1400 subfamily |
| Application Segment | Industrial embedded control |
| Supply Voltage | 3.3 V |
| Package | PG-VQFN-48-73 |
| Pin Count | 48 pins |
| Exposed Pad | Yes |
| Mounting Type | Surface mount |
XMC1404Q048X0200AAXUMA1 pg-vqfn-48-73 Pin Configuration Guide
Pin configuration for XMC1404Q048X0200AAXUMA1 (pg-vqfn-48-73 package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XMC1404Q048X0200AAXUMA1.
Refer to the datasheet for full pin configuration.
Typical Applications
XMC1404Q048X0200AAXUMA1 is suitable for 6 applications: Industrial Motor Control, DC Power Conversion, LED Lighting Controller, Human-Machine Interface, Low-Cost Embedded Control, Industrial Sensor Interface.
Industrial Motor Control
The XMC1404Q048X0200AAXUMA1 fits compact motor-control controllers because the XMC1400 family is optimized for embedded motor-control systems and provides a 48 MHz Arm Cortex-M0 processor. Its 200 KB flash can store control algorithms, calibration constants, and fault-handling code, while 16 KB of SRAM supports real-time variables. The MCU can coordinate timing, digital control, and communications around an external power stage. Before layout release, engineers should confirm the required timer channels, analog inputs, and motor-control peripherals in the Infineon datasheet, and must assign pins according to the PG-VQFN-48-73 package.
Recommended
DC Power Conversion
The XMC1404Q048X0200AAXUMA1 can serve as the supervisory controller in a digital power-conversion system because the XMC1400 series targets low-cost power-control applications. The 48 MHz Cortex-M0 core supports deterministic control-loop execution, and 200 KB of flash provides room for compensation algorithms, fault states, and communication stacks. A practical implementation would use the MCU to measure converter conditions and update control or protection functions while a dedicated analog power stage performs the energy conversion. The 48-pin PG-VQFN-48-73 package also permits a compact controller board, but its exposed pad requires a properly designed thermal-via pattern.
Recommended
LED Lighting Controller
The XMC1404Q048X0200AAXUMA1 is appropriate for programmable LED-lighting controllers because Infineon identifies the XMC1400 series as optimized for LED lighting and low-cost embedded control. Its 48 MHz processing rate can support timing and control logic, while 200 KB flash can hold lighting scenes, fade profiles, calibration tables, and communication firmware. The device can monitor operating commands and coordinate outputs through the available embedded peripherals, while external circuitry carries the LED current. Exact PWM channels, analog inputs, and package pin assignments should be checked against the Infineon XMC1400 datasheet and the exact 48-pin ordering code.
Recommended
Human-Machine Interface
The XMC1404Q048X0200AAXUMA1 can support an industrial human-machine interface that combines local controls, status indication, and serial communication. The 48 MHz Cortex-M0 processor provides sufficient headroom for user-interface logic, event handling, and communication protocols, while 200 KB flash accommodates firmware assets and 16 KB SRAM supports active display and input state. Its 48-pin PG-VQFN package helps reduce board area in panel-mounted equipment where space is constrained. Designers should assign the required display, button, and communication pins directly from the PG-VQFN-48-73 pin table and reserve the exposed pad for an effective ground and thermal layout.
Recommended
Low-Cost Embedded Control
The XMC1404Q048X0200AAXUMA1 targets cost-conscious embedded-control designs that require more capability than a basic logic controller. Its 48 MHz Arm Cortex-M0 core provides deterministic 32-bit processing, 200 KB of flash offers substantial local program storage, and 16 KB of SRAM supports real-time state. These characteristics allow one device to combine supervisory logic, communications, and control functions without requiring external program memory. The implementation should preserve the package-specific pin map, provide clean decoupling for the 3.3 V supply, and use the manufacturer's PG-VQFN-48-73 land-pattern guidance to minimize assembly and thermal risks.
Recommended
Industrial Sensor Interface
The XMC1404Q048X0200AAXUMA1 can act as the central controller for a compact industrial sensor interface when the design requires local signal conditioning logic, calibration storage, and communication handling. The 48 MHz Cortex-M0 core supports time-critical input processing, while 200 KB of flash can retain device configuration and calibration data without relying on external nonvolatile memory. A practical design would connect sensor inputs through the device's available analog and digital peripherals, process the values locally, and publish results over a serial interface. Pin multiplexing and peripheral limits must be verified from the Infineon datasheet because those details depend on the selected XMC1404 ordering code.
Recommended
Recommended Products Summary
Engineering reference data for XMC1404Q048X0200AAXUMA1 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XMC1404Q048X0200AAXTMA1 | XMC1404F064X0200AAXUMA1 |
|---|---|---|---|
| Package | PG-VQFN-48-73 | PG-VQFN-48-73 | PG-VQFN-48-73 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| CPU Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 |
| CPU Frequency | 48 MHz | 48 MHz | 48 MHz |
| Architecture | 32-bit | 32-bit | 32-bit |
| Product Series | XMC1400 series | XMC1400 series | XMC1400 series |
| Target Applications | Motor control, power conversion, LED lighting, HMI | Motor control, power conversion, LED lighting, HMI | Embedded control |
Key Differentiators
- Documented exact-package ordering support (vs XMC1404Q048X0200AAXTMA1)
- Confirmed 200 KB flash configuration (vs XMC1404F064X0200AAXUMA1)
- Industrial XMC1400 positioning (vs XMC1404Q048X0200AAXTMA1)
Design Notes
Use the Infineon PG-VQFN-48-73 package document for the land pattern and exposed-pad connection. Place the MCU's decoupling capacitors close to the relevant supply pins, connect the exposed pad to the intended ground plane, and add thermal vias where the package drawing allows them. Do not substitute a generic 48-pin QFN footprint because pad dimensions, pin numbering, and exposed-pad geometry must agree with the ordered package.
Select the pin map from the exact XMC1404Q048X0200AAXUMA1 ordering code rather than copying it from another XMC1400 device. The XMC1400 family includes variants with different pin counts and configurations, and an incorrect software pin map can assign a signal to the wrong physical lead. Cross-check the schematic, board file, device configuration data, and debugger settings before releasing production firmware.
Treat the exposed pad as both an electrical connection and a thermal path. Route it to a low-impedance ground region and use the number and placement of thermal vias recommended by Infineon's package guidance. Validate final junction temperature with the actual PCB, enclosure, switching loss, and ambient conditions; a compact controller board may need additional copper or thermal spreading around the MCU for sustained 48 MHz operation.
Plan the 3.3 V supply path so switching-current spikes and analog signals do not share narrow impedance with sensitive return paths. Follow the datasheet's required supply and decoupling connections, keep the power loop compact, and route return current through the ground plane rather than across long copper traces. Firmware should also use the controller's available supervisor or reset mechanisms when those functions are enabled for the selected package.
Compliance Information
The manufacturer identifies the device as an industrial MCU, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 is not applicable to the stated industrial ordering designation.