XMC4504-F100K512AB 120MHz Cortex-M4 MCU | Infineon
料号： XMC4504-F100K512AB ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
XMC4504-F100K512AB 概述
What is an ARM Cortex-M4 microcontroller? An MCU is a semiconductor that integrates a processor core, program memory, data memory, and peripherals on one device. The ARM Cortex-M4 core belongs to the microcontroller hierarchy, where the XMC4504-F100K512AB adds Infineon timing, communications, analog, and digital-control resources for embedded industrial systems. Its 512 KB flash supports firmware storage, while 128 KB SRAM provides working memory for control loops and communication tasks.
The verified product information identifies a 120 MHz processor, 512 KB flash, 128 KB SRAM, Ethernet MAC, and LQFP-100 package. Search results also describe the device as part of Infineon’s XMC4000 family and identify associated peripherals including DMA, I2S, LED, POR, PWM, and watchdog functions. The available source data does not provide verified values for every electrical limit, pin function, peripheral characteristic, or package dimension, so those details remain marked as data needed.
The target MPN is associated with Infineon ordering information that distinguishes it from the similarly named XMC4504-F100K512-AC. The verified search results identify XMC4504-F100K512-AC as an industrial ARM Cortex-M4 device with the same headline 120 MHz, 512 KB flash, and 128 KB SRAM characteristics, but the supplied data does not establish every pin-level difference. Direct substitution therefore requires comparison of the exact package drawing, pin names, electrical ratings, memory map, and qualification markings.
Typical design roles include industrial automation, motor and motion control, networked embedded equipment, and real-time control systems where deterministic peripheral timing and Ethernet connectivity are useful. The Ethernet MAC makes the device relevant to connected industrial controllers, provided the design includes suitable PHY, magnetics, routing, and signal-integrity implementation.
The LQFP-100 package requires careful PCB escape routing, decoupling, exposed thermal considerations where applicable, and verification of all 100 pins against the manufacturer package drawing. This page combines verified Infineon and distributor information with clearly identified missing-data boundaries rather than inferring undocumented specifications.
直接替换替代料： XMC4504-F100K512AB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
快速对比工具——选择替代料号进行并排对比：
XMC4504-F100K512-AC
✅ 直接替换📋 参考替代料（不在目录中）
XMC4504F100K512ACXQMA1
✅ 直接替换📋 参考替代料（不在目录中）
XMC4504-F100F512-AC
✅ 直接替换📋 参考替代料（不在目录中）
XMC4504-F100K512AB 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 |
| Maximum Processor Frequency | 120 MHz |
| Program Memory | 512 KB flash |
| Program Memory Organization | 512K x 8 bits |
| SRAM | 128 KB |
| Ethernet Interface | Ethernet MAC |
| Product Family | XMC4000 |
| 封装 | LQFP-100 |
| 安装类型 | Surface Mount |
| 工作温度 | -40 °C to +125 °C |
| Peripheral DMA | Available |
| Peripheral I2S | Available |
| Peripheral PWM | Available |
| Peripheral Watchdog | Available |
| Peripheral Power-On Reset | POR available |
| Technology | CMOS |
XMC4504-F100K512AB lqfp-100 引脚配置指南
XMC4504-F100K512AB（lqfp-100 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： XMC4504-F100K512AB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XMC4504-F100K512AB 适用于 6 应用s: Industrial Automation Controller, Real-Time Motor Control, Networked Embedded Equipment, Industrial Sensor and Signal Conditioning Hub, Industrial Data Acquisition System, Embedded Human-Machine Interface Controller.
Industrial Automation Controller
The XMC4504-F100K512AB fits an industrial automation controller that combines deterministic control with network connectivity. Its verified ARM Cortex-M4 core operates up to 120 MHz, while 512 KB of flash provides room for application firmware and 128 KB of SRAM supports control state, diagnostics, and communication buffers. The Ethernet MAC can connect the controller to supervisory equipment or a factory network when paired with a suitable PHY and isolation strategy. Designers should verify timer, communication, and I/O requirements against the exact Infineon documentation before finalizing the controller architecture.
推荐
Real-Time Motor Control
The XMC4504-F100K512AB is suitable for real-time motor-control subsystems where predictable execution and multiple on-chip resources are valuable. Its 120 MHz Cortex-M4 core provides the processing baseline for control algorithms, while the verified peripheral list includes PWM, DMA, and watchdog functions. Those resources can support duty-cycle generation, data movement, and fault monitoring in an industrial drive or positioning system. The available data does not specify every timer channel, capture feature, analog block, or motor-control rating, so those details must be checked in the manufacturer datasheet.
推荐
Networked Embedded Equipment
The Ethernet MAC identified for the XMC4504 family makes XMC4504-F100K512AB a candidate for connected embedded equipment requiring an integrated MCU rather than a separate network controller. The 120 MHz Cortex-M4 core can handle application tasks, 512 KB flash can hold device firmware, and 128 KB SRAM can support protocol state and application data. Board implementation still needs an Ethernet PHY, magnetic isolation, controlled-impedance routing, and ESD protection. Verify the exact MAC feature set, clock requirements, and electrical conditions in the Infineon documentation before schematic release.
推荐
Industrial Sensor and Signal Conditioning Hub
The XMC4504-F100K512AB can serve as the central controller in an industrial sensing hub when the design needs a 120 MHz real-time processor, substantial firmware storage, and 128 KB of working memory. The verified peripheral list includes DMA, I2S, and watchdog-related resources that may assist with data movement, serial audio or sensor interfaces, and system monitoring. The supplied data does not identify ADC resolution, DAC performance, comparator specifications, or analog input ranges, so analog signal conditioning must be designed independently and validated against the exact MCU datasheet.
推荐
Industrial Data Acquisition System
The XMC4504-F100K512AB is appropriate as a control processor for industrial data-acquisition equipment where firmware storage, deterministic execution, and network reporting must coexist in one device. Its 512 KB flash and 128 KB SRAM support a layered architecture containing acquisition control, buffering, diagnostics, and communications. DMA can offload transfers in supported peripheral paths, while the Ethernet MAC can provide an uplink after board-level PHY implementation. Exact acquisition bandwidth, peripheral mapping, and timing margins are not supplied and must be established from the manufacturer documentation.
推荐
Embedded Human-Machine Interface Controller
The XMC4504-F100K512AB can serve as the supervisory controller behind an industrial HMI or operator-panel interface when the product needs deterministic peripheral control and Ethernet connectivity. The 120 MHz core supports multitasking and communication workloads, while 512 KB flash and 128 KB SRAM provide a practical memory base for protocol, graphics-state, and diagnostics code. The package and exact LCD, touch, and serial interface requirements are not fully documented in the supplied data, so the engineer should confirm peripheral availability and pin multiplexing before selecting companion interface devices.
推荐
推荐产品汇总
工程参考数据： XMC4504-F100K512AB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XMC4504-F100K512-AC | XMC4504F100K512ACXQMA1 | XMC4504-F100F512-AC |
|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon |
| Package | LQFP-100 | LQFP-100 | PG-LQFP-100-11 | LQFP-100 |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Program Memory | 512 KB flash | 512 KB flash | 512 KB flash | 512 KB flash |
关键差异点
- Verified industrial Cortex-M4 processing baseline （对比 XMC4504-F100K512-AC)
- Integrated connectivity for networked embedded systems （对比 XMC4504-F100F512-AC)
- Memory configuration aligned with firmware-heavy control （对比 XMC4504F100K512ACXQMA1)
设计说明
Before power-tree design, obtain the exact Infineon supply-voltage range, absolute maximum ratings, core-clock requirements, and I/O current limits from the manufacturer documentation. The supplied data confirms a 120 MHz Cortex-M4 MCU but does not provide these power specifications. Use the verified operating-temperature range of -40 °C to +125 °C as a system constraint, and validate regulator headroom, sequencing, decoupling, and brownout behavior against the final clock and peripheral configuration.
Treat the LQFP-100 footprint and all 100 pin assignments as controlled documentation, not as values inferred from the search snippets. Preserve the manufacturer-recommended land pattern, pin-1 orientation, and exposed thermal or ground requirements from the exact package drawing. Place required decoupling and clock components close to their associated pins, and route high-current and sensitive communications paths with appropriate return paths.
If the Ethernet MAC is used, design the board-level network interface as a controlled-impedance subsystem with short differential routing, continuous reference planes, proper via transitions, ESD protection, and isolation appropriate to the installation. The MCU Ethernet MAC does not by itself guarantee network performance; PHY selection, magnetics, termination, clocking, and firmware timing must be validated together.
Do not substitute an apparently similar XMC4504 order code solely from the processor frequency and memory size. Compare the exact ordering suffix, package drawing, pin names, alternate functions, electrical limits, memory organization, peripheral configuration, temperature grade, lifecycle status, and software support. The supplied data identifies XMC4504-F100K512-AC and XMC4504F100K512ACXQMA1 as related candidates but does not establish guaranteed interchangeability.
合规信息
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields must be confirmed from the current Infineon product documentation or supplier certificates.
