XMC4504F144K512ACXQMA1 - 120MHz Cortex-M4 512KB MCU | Infineon
料号: XMC4504F144K512ACXQMA1 ✓ 量产中XMC4504F144K512ACXQMA1 概述
An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. It belongs to the Arm Cortex-M family and provides integrated flash memory, SRAM, communication peripherals, timers, and interrupt-control hardware in one device. The XMC4504F144K512ACXQMA1 extends this architecture into the Infineon XMC4500 family for industrial applications that require real-time control and Ethernet connectivity.
The principal device characteristics include a 120 MHz maximum clock, 512 KB of flash, 128 KB of SRAM, and a single processor core. Its 1.3 V and 3.3 V supply descriptions correspond to embedded core and I/O operating domains. The 144-lead PG-LQFP package provides ample I/O capacity for external memory interfaces, communications, analog inputs, timers, and industrial control signals while supporting surface-mount assembly.
The XMC4500 architecture integrates Ethernet MAC functionality with a configurable peripheral set, allowing designers to tailor the controller to specific application requirements. Peripheral functionality and pin multiplexing should be configured together because the available pins and alternate functions depend on the selected operating mode. Firmware development uses the Arm Cortex-M4 programming model, with startup, linker, and device-support files required for the specific Infineon part and package.
Typical applications include industrial Ethernet controllers, factory automation equipment, networked sensors, industrial gateways, motor-control systems, and embedded automation platforms. The combination of 120 MHz processing performance, 512 KB flash, and Ethernet MAC support makes the device appropriate for control nodes that must execute application firmware while communicating over an industrial Ethernet network.
When assigning the package pins, consult the manufacturer pin-description table for the exact PG-LQFP-144-18 pinout. In particular, verify the functions of communication, debug, analog, reset, clock, and power pins before finalizing PCB routing. Proper decoupling, exposed-pad thermal design, and signal-integrity practices remain essential for reliable industrial operation.
This page combines the manufacturer product identity, distributor specification details, same-family drop-in candidates, application guidance, and design-focused comparisons. These engineering references help engineers assess package reuse, peripheral compatibility, firmware prerequisites, and sourcing requirements before committing the XMC4504F144K512ACXQMA1 to an industrial embedded design.
直接替换替代料: XMC4504F144K512ACXQMA1 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XMC4504F144K512ACXQMA1 (相同外形与封装尺寸) ——差异在于 Flash Memory, Package, Product Type, SRAM.
XMC4504F100K512ACXQMA1
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XMC4504F144F512ACXQMA1
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XMC4504F100F512ACXQMA1
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XMC4504F144K256ACXQMA1
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XMC4500F144F768ACXQMA1
✅ 直接替换联系询价
查看数据手册 →XMC4504F144K512ACXQMA1 最大额定值与电气特性
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | ARM 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Core Count | 1 |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| Ethernet | Ethernet MAC |
| Core Supply Voltage | 1.3 V |
| I/O Supply Voltage | 3.3 V |
| Specified Operating Voltage Range | 3.13 V to 3.63 V |
| 封装 | PG-LQFP-144-18 |
| Package Dimensions | 20 mm x 20 mm |
| 引脚数量 | 144 pins |
| 安装类型 | Surface Mount |
| Shipping Format | Tray |
| Application Segment | Industrial |
| RoHS 状态 | Compliant |
| Programming Model | Arm Cortex-M4 |
| Product Family | XMC4000 |
XMC4504F144K512ACXQMA1 20 mm x 20 mm 引脚配置指南
XMC4504F144K512ACXQMA1(20 mm x 20 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XMC4504F144K512ACXQMA1.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XMC4504F144K512ACXQMA1 适用于 6 应用s: Industrial Ethernet Gateway, Factory Automation Controller, Networked Sensor Controller, Motor Control and Monitoring, Industrial Communication Concentrator, Embedded Automation Platform.
Industrial Ethernet Gateway
The XMC4504F144K512ACXQMA1 fits an industrial Ethernet gateway because it combines a 120 MHz Arm Cortex-M4 core with an integrated Ethernet MAC. It can execute protocol conversion, local control, data conditioning, and supervisory tasks without relying on an external network controller. Its 512 KB flash supports a larger embedded application than many basic communication controllers, while 128 KB SRAM accommodates active protocol buffers. The PG-LQFP-144-18 package also offers substantial pin availability for status indicators, serial interfaces, digital inputs, and industrial I/O.
推荐
Factory Automation Controller
For factory automation, the XMC4504F144K512ACXQMA1 provides the real-time processing capacity required for sequencing machinery and coordinating distributed automation tasks. Its 120 MHz Cortex-M4 processor can execute control algorithms while configurable peripherals support timers, communications, and digital functions. The 512 KB flash capacity accommodates control code, configuration data, and diagnostics, while the large 144-pin package helps expose signals needed by a multi-axis or multi-IO control module.
推荐
Networked Sensor Controller
The XMC4504F144K512ACXQMA1 is suitable for a networked sensor controller that must acquire process data, run local filtering, and report results through Ethernet. Its 120 MHz processor supports responsive task scheduling without offloading all control work to the network interface, and its Ethernet MAC reduces the need for a separate Ethernet controller. The 512 KB flash provides room for protocol stacks and application firmware, while 128 KB SRAM supports active sampling, packet, and configuration buffers.
推荐
Motor Control and Monitoring
The XMC4504F144K512ACXQMA1 can serve as the supervisory controller in an industrial motor-drive system. A 120 MHz Cortex-M4 core can execute speed-reference logic, state monitoring, fault handling, and communication tasks while dedicated timers and I/O interact with the power stage. The 144-pin PG-LQFP package provides a useful mix of control and monitoring connections, and the 512 KB flash allows concurrent motor-control, diagnostics, and field-update firmware.
推荐
Industrial Communication Concentrator
A communication concentrator benefits from the XMC4504F144K512ACXQMA1's combination of Ethernet MAC support and a 120 MHz processing core. The microcontroller can aggregate local sensor data, manage protocol conversion, and expose diagnostics over a shared industrial network. Its 512 KB flash and 128 KB SRAM provide usable storage for firmware and active communication buffers. The 3.3 V I/O domain also supports integration with conventional industrial digital interfaces when their levels and timing are compatible.
推荐
Embedded Automation Platform
The XMC4504F144K512ACXQMA1 is appropriate for an embedded automation platform that combines network communication with deterministic local control. Its single 32-bit Cortex-M4 core provides predictable instruction execution at up to 120 MHz, while the configurable peripheral set lets designers tailor timer, serial, and I/O resources to the machine. The 512 KB flash accommodates application layers, and the 144-pin package offers a broad pin budget for sensors, actuators, service interfaces, and expansion buses.
推荐
推荐产品汇总
工程参考数据: XMC4504F144K512ACXQMA1 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XMC4504F100K512ACXQMA1 | XMC4504F144F512ACXQMA1 | XMC4504F100F512ACXQMA1 | XMC4504F144K256ACXQMA1 | XMC4500F144F768ACXQMA1 |
|---|---|---|---|---|---|---|
| Package | PG-LQFP-144-18 | PG-LQFP-144-18 | PG-LQFP-144-18 | PG-LQFP-144-18 | PG-LQFP-144-18 | PG-LQFP-144-18 |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB | 768 KB |
| Application Class | Industrial | Industrial | Industrial | Industrial | Industrial | Industrial |
关键差异点
- Larger 144-pin interface allocation in the target selection (对比 XMC4504F100K512ACXQMA1)
- Memory density is exactly matched (对比 XMC4504F144K256ACXQMA1)
- Lower flash usage than a higher-memory XMC option (对比 XMC4500F144F768ACXQMA1)
- Same 120 MHz Cortex-M4 performance class (对比 XMC4504F100F512ACXQMA1)
设计说明
Assign all PG-LQFP-144-18 signals from the manufacturer pin-description table, including alternate functions, before routing the PCB. Keep the 1.3 V core and 3.3 V I/O supply networks distinct until their point of connection, and place local bypass capacitors close to the corresponding power pins. Ethernet differential pairs should follow a continuous reference plane with minimized stubs and via transitions.
Design the supply rails for separate core and I/O requirements of 1.3 V and 3.3 V, respectively. Use the manufacturer electrical-characteristics tables for current limits, sequencing, startup, and load-transient expectations. Confirm that upstream regulators can accommodate the combined core and I/O demand at 120 MHz and that voltage tolerances remain within the 3.13 V to 3.63 V operating range.
Although the PG-LQFP-144-18 package provides a large number of leads, thermal performance depends on the PCB copper and airflow rather than lead count alone. Connect the exposed thermal pad to the required ground plane with the manufacturer-recommended via pattern and keep thermal copper away from sensitive signal-routing areas. Validate junction temperature at the highest expected ambient temperature and operating frequency.
Do not substitute the MCU solely because another XMC part has a similar flash capacity or operating frequency. Compare the exact pin names, alternate-function multiplexing, clock requirements, peripheral set, device headers, startup code, and memory map. A same-family footprint match is necessary for PCB reuse, while successful software migration still requires recompilation and hardware validation.
合规信息
The LCSC product record identifies the exact MPN as RoHS compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is stated.