Zilog

Z86C9325VSC - 25MHz 8-Bit ROMless MCU | Zilog

料号: Z86C9325VSC ✓ 量产中
2.97 V to 5.5 V Vdss 44-pin plastic leaded chip carrier (PLCC-44) Package 25 MHz Speed 236 byte Memory
最小起订量: 1 |

Z86C9325VSC 概述

The Zilog Z86C9325VSC is an 8-bit ROMless Z8 microcontroller operating at up to 25 MHz with a 2.97 V to 5.5 V supply range. It provides 24 I/O ports, 236 bytes of data memory, and a 44-pin plastic leaded chip carrier package measuring 16.6 mm by 16.6 mm. The device is designed for embedded control systems that require an external program memory and a peripheral-rich 8-bit architecture.

A ROMless microcontroller is an integrated circuit that executes application software from external memory rather than storing the program internally. In the product hierarchy, the Z86C9325VSC is an 8-bit microcontroller, a microcontroller, an embedded processor, and a semiconductor. Its Z8 core and external-memory interface allow designers to use larger program-memory devices than the MCU itself provides, while the 24 I/O ports support digital control, measurement, and communication interfaces.

Principal electrical characteristics include a 25 MHz maximum clock frequency, an 8-bit data bus, 24 I/O ports, and operation from 2.97 V to 5.5 V. The component is identified as an active Zilog product. Its PLCC-44 package supports through-hole board assembly and offers enough pins for dedicated port signals and external bus connections. Because program storage is external, the complete system must include a suitable program-memory device and address, data, and control connections.

The architecture is based on the Zilog Z8 family and is related to the Z86C91, while providing more capable mathematical processing. The family also includes a capture register and a fast decrement mode. These features make the controller relevant to industrial control logic, measurement equipment, motor-control peripherals, and legacy embedded platforms where an established 8-bit ecosystem and deterministic peripheral behavior are important.

Typical applications include programmable logic controllers, instrumentation front ends, industrial sequencers, keypad-controlled equipment, and external-processor-memory control boards. A system designer should confirm the required bus timing, memory-device interface, pin multiplexing, and clock source before finalizing the schematic. The MCU's external program memory also affects boot time, firmware organization, and the total board-level component count.

One key design consideration is that the ROMless architecture is not interchangeable with a device containing internal program memory without examining the external bus and firmware requirements. Use the manufacturer pin-description table and package drawing when assigning PCB tracks, and validate signal timing against the selected external memory. This page combines device specifications, sourcing guidance, replacement analysis, and practical design considerations for engineers evaluating the Z86C9325VSC.

直接替换替代料: Z86C9325VSC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: Z86C9325VSC (相同外形与封装尺寸) ——差异在于 Mounting Type, I/O Port Count, Maximum Clock Frequency, Package Type, Program Memory.

Zilog
Mounting Type: Surface mount
Maximum Clock Frequency: 16 MHz
Program Memory: ROMless; external memory required
对比 Z86C9325VSC →
Zilog
Mounting Type: Surface Mount
I/O Port Count: 24
Package Type: 44-pin PLCC
对比 Z86C9325VSC →

Z86C9325VSG

✅ 直接替换
Zilog
📦 PLCC-44
8-bit ROMless Microcontroller · Zilog · Z8 · 8 bit · 25 MHz · 2.97 V to 5.5 V · 24 · ROMless

联系询价

查看数据手册 →

Z86C9325VSC 最大额定值与电气特性

Microcontroller Type 8-bit ROMless microcontroller
Architecture Z8
最大时钟频率 25 MHz
Supply Voltage Range 2.97 V to 5.5 V
数据总线宽度 8 bit
I/O Port Count 24 ports
Data Memory 236 byte
Program Memory External ROM; capacity not stated
Package Type 44-pin plastic leaded chip carrier (PLCC-44)
Package Dimensions 16.6 mm x 16.6 mm
安装类型 Through-hole surface-mount package
RoHS 状态 Compliant
生命周期状态 Active
Functional Compatibility Compatible with Z86C91; enhanced mathematical capability

Z86C9325VSC 16.6 mm x 16.6 mm 引脚配置指南

Z86C9325VSC(16.6 mm x 16.6 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

Z86C9325VSC 的 16.6 mm x 16.6 mm 封装引脚图

暂无详细引脚数据: Z86C9325VSC.

请参阅 数据手册 以查看完整引脚配置。

典型应用

Z86C9325VSC 适用于 6 应用s: Programmable Logic Controller, Industrial Sequencer and Step Controller, Instrumentation Front End, External ROM Controller Card, Keypad-Controlled Embedded Equipment, Legacy Z8 System Upgrade.

🏭

Programmable Logic Controller

The Z86C9325VSC fits a small PLC because its 24 I/O ports provide substantial digital control capacity while the Z8 core handles sequencing at up to 25 MHz. It is placed beside an external program ROM that stores the control application, with the processor supervising inputs, outputs, timing, and operator commands. The ROMless architecture separates execution from firmware storage and permits program capacity to scale with the memory device. Designers should define reset and clock circuits, verify external bus timing, and allocate port functions according to the pin-description table. The 2.97 V to 5.5 V operating range also allows the controller to share common industrial logic levels.

🏭

Industrial Sequencer and Step Controller

A step sequencer can use the Z86C9325VSC to coordinate machine stages because the 25 MHz Z8 core provides substantially more arithmetic capability than the earlier Z86C91 family while retaining functional compatibility. Its 24 I/O ports can represent start commands, stage enables, interlocks, status lamps, and actuator outputs. Application firmware remains in external ROM, allowing controlled logic to be reused without changing the MCU. The practical benefit is deterministic low-cost automation around a familiar 8-bit architecture. Engineer the system with an external clock, reset supervision, input conditioning, and actuator-driver isolation rather than driving loads directly from the controller pins.

🔧

Instrumentation Front End

The Z86C9325VSC can serve as the supervisory controller in a measurement instrument when external sensors require digital acquisition and the main task is calibration, status tracking, and data handling. Its 24 I/O ports support switches, indicators, relay commands, and interface handshakes, while the external ROM architecture permits larger lookup tables and application code. Operating at up to 25 MHz gives designers headroom for time-critical control routines. Signal-conditioning amplifiers remain separate from the MCU, and analog-to-digital conversion needs an appropriate converter when the measurement is not inherently digital. Firmware partitioning should reserve external bus access for predictable timing.

🖥️

External ROM Controller Card

The Z86C9325VSC is well suited to a plug-in controller card that standardizes on an external memory device for program storage. The MCU occupies the central control position, coordinating the address and data bus, executing the 25 MHz Z8 instruction stream, and exchanging information with peripheral logic through 24 I/O ports. This arrangement makes it possible to reuse one controller design with different memory sizes during product revisions. Board bring-up should begin with power, reset, clock, and external-memory access checks before peripheral testing. The PLCC-44 footprint also facilitates socketed legacy-system upgrades, subject to confirming the exact package pinout and mechanical clearance.

📺

Keypad-Controlled Embedded Equipment

A keypad and display controller can use the Z86C9325VSC to scan user inputs, manage operating modes, and maintain machine state across 24 general-purpose I/O ports. Its 8-bit Z8 architecture and 25 MHz operating rate support responsive menu processing and debounce routines without requiring a large processor. Application code and lookup tables can be placed in external ROM, while the 236-byte internal data memory supports short-term variables and stack operations. Designers should isolate display and keypad interfaces from the external program bus where timing permits, use proper pull-up or pull-down arrangements for open-drain signals, and confirm that the chosen display driver operates within the 2.97 V to 5.5 V system range.

🔧

Legacy Z8 System Upgrade

The Z86C9325VSC supports modernization of a legacy Z86C91-based embedded system because the Z86C93 remains functionally compatible while adding more capable mathematical processing. Engineers can retain much of the peripheral architecture and external-memory concept while using the 25 MHz device for additional computation or control workload. The migration is most practical when the replacement board preserves PLCC-44 pin assignment and the external ROM interface. Existing firmware should be reviewed for instruction-set and timing assumptions, and the application must be recompiled for the target part. A socket-based conversion can reduce board rework, but mechanical and electrical compatibility must be confirmed independently.

What is the Z86C9325VSC?
The Z86C9325VSC is a Zilog Z8 8-bit ROMless microcontroller rated for operation up to 25 MHz from a 2.97 V to 5.5 V supply. According to the Zilog datasheet, it provides 24 I/O ports, 236 bytes of data memory, and an external program-memory interface in a 44-pin PLCC package.
What are the key specifications of Z86C9325VSC?
The principal Z86C9325VSC specifications are a 25 MHz maximum clock, 8-bit bus architecture, 24 I/O ports, 236 bytes of data memory, and a 2.97 V to 5.5 V operating supply. The Zilog datasheet identifies the device as a ROMless Z8 microcontroller packaged in PLCC-44, so firmware storage must be provided by external memory.
Where can I download the Z86C9325VSC datasheet PDF?
The Z86C9325VSC datasheet PDF can be downloaded from the linked Zilog datasheet document on this page. It is the appropriate document for confirming the pin-description table, external memory interface, timing limits, electrical characteristics, and PLCC-44 package drawing before laying out or modifying a PCB.
Where can I find the Z86C9325VSC pinout?
Use the pin-description table and package drawing in the Zilog Z86C9325VSC datasheet to locate every PLCC-44 connection. The searchable product documentation includes datasheet, package, and pinout references, while the manufacturer datasheet remains the controlling source for pin numbers, signal names, and no-connect positions.
Is Z86C9325VSC suitable for an external-memory control system?
Yes, the Z86C9325VSC is specifically suited to a system that stores firmware in external program memory. Its ROMless Z8 architecture operates at up to 25 MHz and includes 24 I/O ports, but the external memory device, bus timing, and board-level address and data routing must be designed and validated together.
What is the difference between Z86C9325VSC and Z86C9325VSG?
The Z86C9325VSC and Z86C9325VSG both belong to the same Zilog Z86C9325 family and are listed as completely replaceable because their packages, terminals, and principal performance characteristics are consistent. The manufacturer suffix distinguishes the ordering or qualification configuration, so check the package marking and temperature requirements before substitution.
When should I choose Z86C9325VSC over another 8-bit ROMless MCU?
Choose the Z86C9325VSC when an existing Zilog Z8 design needs 25 MHz operation, 24 I/O ports, 236 bytes of data memory, external ROM, and the established PLCC-44 footprint. Choosing a different MCU generally requires software and hardware migration, while Z86C9325VSG is the closest documented same-package alternative.
What can replace Z86C9325VSC?
The documented drop-in replacement is the Zilog Z86C9325VSG. A comparison states that both parts have consistent terminals and packages and completely replace one another without PCB modification. Confirm operating-temperature, marking, qualification, and lifecycle requirements against the manufacturer documentation before approving the substitution.
Is Z86C9325VSC the same as Z86C9325VSG?
The Z86C9325VSC and Z86C9325VSG are functionally and package compatible, and the published comparison identifies the VSG as a complete replacement for the VSC. They share the 44-pin PLCC format and 25 MHz Z8 device family, although ordering suffixes can encode different commercial or environmental configurations.
Z86C9325VSC vs Z86C9116VSC: which is better for a 25 MHz design?
The Z86C9325VSC is the better match for a design specified at 25 MHz because its documented maximum clock is 25 MHz. The comparison identifies the Z86C9116VSC as a 16 MHz device, a 36% lower clock rate than the VSC; it also has 236 bytes of memory, but that does not offset the clock mismatch.
Where can I buy Z86C9325VSC online?
Use the Request a Quote form on this page to request Z86C9325VSC availability, current unit cost, minimum order quantity, and lead time. The quote team can confirm the exact Z86C9325VSC ordering code, PLCC-44 packaging, and production availability before an order is placed.
What is the price of Z86C9325VSC?
The current commercial price is best obtained through the Request a Quote form on this page because pricing, quantity, and supply can change independently of the device specification. The form can be used to request a unit-price breakdown for Z86C9325VSC, including the required quantity and delivery destination.
What is the lead time and stock status for Z86C9325VSC?
Current stock and lead time should be confirmed through the Request a Quote form on this page. The Z86C9325VSC is identified as an active part, but lifecycle status does not by itself guarantee immediate inventory, a specific delivery date, or a minimum-order quantity for every order quantity.
Does Z86C9325VSC require external program memory?
Yes, the Z86C9325VSC is a ROMless microcontroller and therefore requires an external program-memory device in a practical implementation. Its 236-byte figure refers to internal data memory, not embedded firmware capacity, so the external memory must be selected to match the firmware image and bus requirements.
Is Z86C9325VSC RoHS compliant?
The Z86C9325VSC is identified as RoHS compliant in its product listing. The available documentation also identifies the device as active, although a separate REACH declaration, AEC-Q100 qualification, halogen-free statement, and conflict-minerals declaration are not stated on this page and should be confirmed for regulated designs.

工程参考数据: Z86C9325VSC ——对比、设计指导和合规信息。

选型指南

Choose the Z86C9325VSC when maintaining or designing a Zilog Z8 control platform that requires an 8-bit ROMless MCU, 25 MHz operation, 24 I/O ports, 236 bytes of data memory, and a PLCC-44 footprint. The Z86C9325VSG is the preferred substitute when its ordering and qualification configuration match the target because it is documented as a complete, same-package replacement. Consider the Z86C9116VSC only for legacy Z86C91-compatible systems whose timing requirements are comfortably below its 16 MHz limit and whose external-memory interface and firmware have been validated. For a new design, assess whether the external ROM requirement, 8-bit performance, and PLCC assembly method align with the product roadmap. The target is not a universal MCU replacement: pin compatibility, external bus behavior, supply range, timing, and approved operating conditions must all match the existing design.

与替代料对比

参数 本产品 Z86C9325VSG
Brand Zilog Zilog
Package PLCC-44 PLCC-44
Microcontroller Type 8-bit ROMless microcontroller 8-bit ROMless microcontroller
Maximum Clock Frequency 25 MHz 25 MHz
Program Memory External ROM External ROM

关键差异点

  • Direct same-package replacement path (对比 Z86C9325VSG)
  • Higher clock than the related Z86C9116VSC (对比 Z86C9116VSC)
  • External program-memory scalability (对比 Z86C9325VSG)

设计说明

Assign the external program-memory bus, clock, reset, and port functions directly from the manufacturer pin-description table. Keep the memory address, data, and control traces short, route clock and reset away from switching-node wiring, and provide separate return paths for external bus drivers. PLCC-44 is a through-hole leaded package, so verify drilling, annular-ring dimensions, solder-mask clearance, and component height against the official package drawing.

Decouple each supply rail near the device with the capacitance and ESR requirements stated in the manufacturer documentation. The Z86C9325VSC operates across 2.97 V to 5.5 V, but acceptable supply ripple, rise time, and sequencing remain design constraints. Establish valid clock and reset levels before enabling external bus activity; otherwise a marginal power rail can produce address or data faults that resemble defective firmware.

Do not treat the 236-byte memory figure as program-memory capacity. The controller is ROMless, so the board must include a compatible external program-memory device. Confirm bus width, access timing, addressable capacity, and the firmware image format before selecting the memory. Also do not substitute a related Z86C device solely from its clock rating: Z86C9116VSC is listed at 16 MHz, which is 36% below the Z86C9325VSC's 25 MHz clock.

Preserve access to the PLCC socket or component leads when the board is intended for service or firmware upgrades. Leave clearance around the package for a socket, extraction tool, and inspection, while observing the manufacturer's soldering and cleaning requirements. If the design adds high-current relays, motors, or lamps, route their supplies and returns away from the external program bus to reduce ground bounce and false memory-read errors.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS compliance is stated in the product listing. The device is an industrial Z8 microcontroller, so AEC-Q100 is not applicable; REACH, lead-free, halogen-free, and conflict-minerals declarations are not specified.

数据核验日期: 2026-11-17 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

Z86C9325VSC datasheet Z86C9325VSC datasheet pdf Z86C9325VSC pinout Z86C9325VSC equivalent Z86C9325VSC replacement Z86C9325VSC vs Z86C9325VSG Z86C9325VSC price Z86C9325VSC stock Zilog Z86C9325VSC 25 MHz ROMless Z8 MCU Z86C9325VSC PLCC-44 footprint Z86C9325VSC external memory interface

相关元器件 & 术语

Zilog Z86C9325VSC Z86C9325VSG Z86C9116VSC Z86C9333VSG Z86C9325PSG Z86C9325ASG Z86C9320VSG Z86C9320ASG Z8 architecture 8-bit microcontroller ROMless microcontroller embedded processor semiconductor external program memory PLCC-44 plastic leaded chip carrier through-hole package 25 MHz clock 2.97 V to 5.5 V supply 24 I/O ports 236-byte data memory 8-bit data bus RoHS
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情