Z86C9325VSC - 25MHz 8-Bit ROMless MCU | Zilog
MPN: Z86C9325VSC ✓ 啟用中Z86C9325VSC 概覽
A ROMless microcontroller is an integrated circuit that executes application software from external memory rather than storing the program internally. In the product hierarchy, the Z86C9325VSC is an 8-bit microcontroller, a microcontroller, an embedded processor, and a semiconductor. Its Z8 core and external-memory interface allow designers to use larger program-memory devices than the MCU itself provides, while the 24 I/O ports support digital control, measurement, and communication interfaces.
Principal electrical characteristics include a 25 MHz maximum clock frequency, an 8-bit data bus, 24 I/O ports, and operation from 2.97 V to 5.5 V. The component is identified as an active Zilog product. Its PLCC-44 package supports through-hole board assembly and offers enough pins for dedicated port signals and external bus connections. Because program storage is external, the complete system must include a suitable program-memory device and address, data, and control connections.
The architecture is based on the Zilog Z8 family and is related to the Z86C91, while providing more capable mathematical processing. The family also includes a capture register and a fast decrement mode. These features make the controller relevant to industrial control logic, measurement equipment, motor-control peripherals, and legacy embedded platforms where an established 8-bit ecosystem and deterministic peripheral behavior are important.
Typical applications include programmable logic controllers, instrumentation front ends, industrial sequencers, keypad-controlled equipment, and external-processor-memory control boards. A system designer should confirm the required bus timing, memory-device interface, pin multiplexing, and clock source before finalizing the schematic. The MCU's external program memory also affects boot time, firmware organization, and the total board-level component count.
One key design consideration is that the ROMless architecture is not interchangeable with a device containing internal program memory without examining the external bus and firmware requirements. Use the manufacturer pin-description table and package drawing when assigning PCB tracks, and validate signal timing against the selected external memory. This page combines device specifications, sourcing guidance, replacement analysis, and practical design considerations for engineers evaluating the Z86C9325VSC.
直接替換替代品,適用於 Z86C9325VSC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: Z86C9325VSC (相同外形與佔位) — 差異在於 Mounting Type, I/O Port Count, Maximum Clock Frequency, Package Type, Program Memory.
Z86C9325VSG
✅ 直接替換聯絡詢價
查看資料表 →Z86C9325VSC 最大額定值與電氣特性
| Microcontroller Type | 8-bit ROMless microcontroller |
| Architecture | Z8 |
| 最大時脈頻率 | 25 MHz |
| Supply Voltage Range | 2.97 V to 5.5 V |
| 資料匯流排寬度 | 8 bit |
| I/O Port Count | 24 ports |
| Data Memory | 236 byte |
| Program Memory | External ROM; capacity not stated |
| Package Type | 44-pin plastic leaded chip carrier (PLCC-44) |
| Package Dimensions | 16.6 mm x 16.6 mm |
| 安裝類型 | Through-hole surface-mount package |
| RoHS 狀態 | Compliant |
| 生命週期狀態 | Active |
| Functional Compatibility | Compatible with Z86C91; enhanced mathematical capability |
Z86C9325VSC 16.6 mm x 16.6 mm 腳位配置指南
Z86C9325VSC(16.6 mm x 16.6 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: Z86C9325VSC.
請參閱 資料表 以查看完整腳位配置。
典型應用
Z86C9325VSC 適用於 6 應用s: Programmable Logic Controller, Industrial Sequencer and Step Controller, Instrumentation Front End, External ROM Controller Card, Keypad-Controlled Embedded Equipment, Legacy Z8 System Upgrade.
Programmable Logic Controller
The Z86C9325VSC fits a small PLC because its 24 I/O ports provide substantial digital control capacity while the Z8 core handles sequencing at up to 25 MHz. It is placed beside an external program ROM that stores the control application, with the processor supervising inputs, outputs, timing, and operator commands. The ROMless architecture separates execution from firmware storage and permits program capacity to scale with the memory device. Designers should define reset and clock circuits, verify external bus timing, and allocate port functions according to the pin-description table. The 2.97 V to 5.5 V operating range also allows the controller to share common industrial logic levels.
推薦
Industrial Sequencer and Step Controller
A step sequencer can use the Z86C9325VSC to coordinate machine stages because the 25 MHz Z8 core provides substantially more arithmetic capability than the earlier Z86C91 family while retaining functional compatibility. Its 24 I/O ports can represent start commands, stage enables, interlocks, status lamps, and actuator outputs. Application firmware remains in external ROM, allowing controlled logic to be reused without changing the MCU. The practical benefit is deterministic low-cost automation around a familiar 8-bit architecture. Engineer the system with an external clock, reset supervision, input conditioning, and actuator-driver isolation rather than driving loads directly from the controller pins.
推薦
Instrumentation Front End
The Z86C9325VSC can serve as the supervisory controller in a measurement instrument when external sensors require digital acquisition and the main task is calibration, status tracking, and data handling. Its 24 I/O ports support switches, indicators, relay commands, and interface handshakes, while the external ROM architecture permits larger lookup tables and application code. Operating at up to 25 MHz gives designers headroom for time-critical control routines. Signal-conditioning amplifiers remain separate from the MCU, and analog-to-digital conversion needs an appropriate converter when the measurement is not inherently digital. Firmware partitioning should reserve external bus access for predictable timing.
推薦
External ROM Controller Card
The Z86C9325VSC is well suited to a plug-in controller card that standardizes on an external memory device for program storage. The MCU occupies the central control position, coordinating the address and data bus, executing the 25 MHz Z8 instruction stream, and exchanging information with peripheral logic through 24 I/O ports. This arrangement makes it possible to reuse one controller design with different memory sizes during product revisions. Board bring-up should begin with power, reset, clock, and external-memory access checks before peripheral testing. The PLCC-44 footprint also facilitates socketed legacy-system upgrades, subject to confirming the exact package pinout and mechanical clearance.
推薦
Keypad-Controlled Embedded Equipment
A keypad and display controller can use the Z86C9325VSC to scan user inputs, manage operating modes, and maintain machine state across 24 general-purpose I/O ports. Its 8-bit Z8 architecture and 25 MHz operating rate support responsive menu processing and debounce routines without requiring a large processor. Application code and lookup tables can be placed in external ROM, while the 236-byte internal data memory supports short-term variables and stack operations. Designers should isolate display and keypad interfaces from the external program bus where timing permits, use proper pull-up or pull-down arrangements for open-drain signals, and confirm that the chosen display driver operates within the 2.97 V to 5.5 V system range.
推薦
Legacy Z8 System Upgrade
The Z86C9325VSC supports modernization of a legacy Z86C91-based embedded system because the Z86C93 remains functionally compatible while adding more capable mathematical processing. Engineers can retain much of the peripheral architecture and external-memory concept while using the 25 MHz device for additional computation or control workload. The migration is most practical when the replacement board preserves PLCC-44 pin assignment and the external ROM interface. Existing firmware should be reviewed for instruction-set and timing assumptions, and the application must be recompiled for the target part. A socket-based conversion can reduce board rework, but mechanical and electrical compatibility must be confirmed independently.
推薦
推薦產品摘要
工程參考資料,適用於 Z86C9325VSC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | Z86C9325VSG |
|---|---|---|
| Brand | Zilog | Zilog |
| Package | PLCC-44 | PLCC-44 |
| Microcontroller Type | 8-bit ROMless microcontroller | 8-bit ROMless microcontroller |
| Maximum Clock Frequency | 25 MHz | 25 MHz |
| Program Memory | External ROM | External ROM |
主要差異化特點
- Direct same-package replacement path (對比Z86C9325VSG)
- Higher clock than the related Z86C9116VSC (對比Z86C9116VSC)
- External program-memory scalability (對比Z86C9325VSG)
設計說明
Assign the external program-memory bus, clock, reset, and port functions directly from the manufacturer pin-description table. Keep the memory address, data, and control traces short, route clock and reset away from switching-node wiring, and provide separate return paths for external bus drivers. PLCC-44 is a through-hole leaded package, so verify drilling, annular-ring dimensions, solder-mask clearance, and component height against the official package drawing.
Decouple each supply rail near the device with the capacitance and ESR requirements stated in the manufacturer documentation. The Z86C9325VSC operates across 2.97 V to 5.5 V, but acceptable supply ripple, rise time, and sequencing remain design constraints. Establish valid clock and reset levels before enabling external bus activity; otherwise a marginal power rail can produce address or data faults that resemble defective firmware.
Do not treat the 236-byte memory figure as program-memory capacity. The controller is ROMless, so the board must include a compatible external program-memory device. Confirm bus width, access timing, addressable capacity, and the firmware image format before selecting the memory. Also do not substitute a related Z86C device solely from its clock rating: Z86C9116VSC is listed at 16 MHz, which is 36% below the Z86C9325VSC's 25 MHz clock.
Preserve access to the PLCC socket or component leads when the board is intended for service or firmware upgrades. Leave clearance around the package for a socket, extraction tool, and inspection, while observing the manufacturer's soldering and cleaning requirements. If the design adds high-current relays, motors, or lamps, route their supplies and returns away from the external program bus to reduce ground bounce and false memory-read errors.
合規資訊
RoHS compliance is stated in the product listing. The device is an industrial Z8 microcontroller, so AEC-Q100 is not applicable; REACH, lead-free, halogen-free, and conflict-minerals declarations are not specified.