ADM483JR vs ADM4850ARZ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ADM483JR بواسطة Analog Devices و ADM4850ARZ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | ADM483JR | ADM4850ARZ |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Low-power differential line transceiver | Differential line transceiver |
| جهد التغذية | 5 V | 5 V |
| معدل البيانات | Up to 250 kbps | — |
| Communication Standard | EIA RS-485/RS-422 compliant | — |
| Operating Mode | Half-duplex | — |
| Typical Operating Supply Current | 120 µA | — |
| Shutdown Supply Current | 100 nA | — |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Maximum Transceivers on One Bus | 32 transceivers | — |
| Output State When Disabled or Powered Off | High impedance | — |
| Slew Rate | Limited for low EMI | Limited |
| Protection | Thermal shutdown and short-circuit protection | — |
| Pin Compatibility | Pin-compatible with MAX483 | — |
| نطاق درجة حرارة التشغيل | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| العلبة | 8-lead SOIC, 3.90 mm width | 8-pin SOIC |
| نوع التركيب | Surface mount | Surface mount |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Maximum Data Rate | — | 115 kbps |
| Duplex Mode | — | Half-duplex |
| Signal Type | — | Balanced differential |
| Bus Architecture | — | Multipoint bus |
| Transmitter Count | — | 1 |
| Receiver Count | — | 1 |
| Tube Quantity | — | 1 unit per tube |
| Reel Packaging | — | ADM4850ARZ-REEL7 |
| Datasheet Revision | — | Rev. F |
| تيار التغذية | — | [DATA_NEEDED: supply current] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |