ADM483JR vs ADM4850ARZ موازنہ
تفصیلی ساتھ ساتھ موازنہ از ADM483JR بذریعہ Analog Devices اور ADM4850ARZ بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | ADM483JR | ADM4850ARZ |
|---|---|---|
| برانڈ | Analog Devices | Analog Devices |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | Low-power differential line transceiver | Differential line transceiver |
| سپلائی وولٹیج | 5 V | 5 V |
| ڈیٹا ریٹ | Up to 250 kbps | — |
| Communication Standard | EIA RS-485/RS-422 compliant | — |
| Operating Mode | Half-duplex | — |
| Typical Operating Supply Current | 120 µA | — |
| Shutdown Supply Current | 100 nA | — |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Maximum Transceivers on One Bus | 32 transceivers | — |
| Output State When Disabled or Powered Off | High impedance | — |
| Slew Rate | Limited for low EMI | Limited |
| Protection | Thermal shutdown and short-circuit protection | — |
| Pin Compatibility | Pin-compatible with MAX483 | — |
| آپریٹنگ درجہ حرارت رینج | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| پیکیج | 8-lead SOIC, 3.90 mm width | 8-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount | Surface mount |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Maximum Data Rate | — | 115 kbps |
| Duplex Mode | — | Half-duplex |
| Signal Type | — | Balanced differential |
| Bus Architecture | — | Multipoint bus |
| Transmitter Count | — | 1 |
| Receiver Count | — | 1 |
| Tube Quantity | — | 1 unit per tube |
| Reel Packaging | — | ADM4850ARZ-REEL7 |
| Datasheet Revision | — | Rev. F |
| سپلائی کرنٹ | — | [DATA_NEEDED: supply current] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |