ADM483JR vs ADM4850ARZ तुलना
विस्तृत दोनों ओर की तुलना ADM483JR द्वारा Analog Devices और ADM4850ARZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | ADM483JR | ADM4850ARZ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Low-power differential line transceiver | Differential line transceiver |
| सप्लाई वोल्टेज | 5 V | 5 V |
| डेटा दर | Up to 250 kbps | — |
| Communication Standard | EIA RS-485/RS-422 compliant | — |
| Operating Mode | Half-duplex | — |
| Typical Operating Supply Current | 120 µA | — |
| Shutdown Supply Current | 100 nA | — |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Maximum Transceivers on One Bus | 32 transceivers | — |
| Output State When Disabled or Powered Off | High impedance | — |
| Slew Rate | Limited for low EMI | Limited |
| Protection | Thermal shutdown and short-circuit protection | — |
| Pin Compatibility | Pin-compatible with MAX483 | — |
| ऑपरेटिंग तापमान रेंज | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| पैकेज | 8-lead SOIC, 3.90 mm width | 8-pin SOIC |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Maximum Data Rate | — | 115 kbps |
| Duplex Mode | — | Half-duplex |
| Signal Type | — | Balanced differential |
| Bus Architecture | — | Multipoint bus |
| Transmitter Count | — | 1 |
| Receiver Count | — | 1 |
| Tube Quantity | — | 1 unit per tube |
| Reel Packaging | — | ADM4850ARZ-REEL7 |
| Datasheet Revision | — | Rev. F |
| सप्लाई करंट | — | [DATA_NEEDED: supply current] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |