ADM483JR vs ADM4850ARZ Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADM483JR tarafından Analog Devices ve ADM4850ARZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | ADM483JR | ADM4850ARZ |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Low-power differential line transceiver | Differential line transceiver |
| Besleme Gerilimi | 5 V | 5 V |
| Veri Hızı | Up to 250 kbps | — |
| Communication Standard | EIA RS-485/RS-422 compliant | — |
| Operating Mode | Half-duplex | — |
| Typical Operating Supply Current | 120 µA | — |
| Shutdown Supply Current | 100 nA | — |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Maximum Transceivers on One Bus | 32 transceivers | — |
| Output State When Disabled or Powered Off | High impedance | — |
| Slew Rate | Limited for low EMI | Limited |
| Protection | Thermal shutdown and short-circuit protection | — |
| Pin Compatibility | Pin-compatible with MAX483 | — |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Paket | 8-lead SOIC, 3.90 mm width | 8-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Maximum Data Rate | — | 115 kbps |
| Duplex Mode | — | Half-duplex |
| Signal Type | — | Balanced differential |
| Bus Architecture | — | Multipoint bus |
| Transmitter Count | — | 1 |
| Receiver Count | — | 1 |
| Tube Quantity | — | 1 unit per tube |
| Reel Packaging | — | ADM4850ARZ-REEL7 |
| Datasheet Revision | — | Rev. F |
| Besleme Akımı | — | [DATA_NEEDED: supply current] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |