BTS70121EPAXUMA1 vs BTS70082EPAXUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ BTS70121EPAXUMA1 بواسطة Infineon و BTS70082EPAXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ نشطمقارنة المواصفات
| المعامل | BTS70121EPAXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET+2 (Protected FET) | PROFET+2 (12 V, dual channel) |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 2 |
| تكوين الخرج | High-Side | — |
| Switch Type | N-Channel (2x8 mOhm integrated) | High-side N-channel MOSFET switch |
| أقصى تيار خرج | 8.5 A | — |
| On-State Resistance (RDS(on)) | 2 x 8 mOhm (typical) | — |
| العلبة | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Pin Pitch | 0.65 mm | — |
| نوع التركيب | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| نطاق درجة حرارة التشغيل | -40C to +150C (junction, AEC-Q100) | — |
| Supply Voltage (Vbb) | [DATA_NEEDED: Vbb operating range] | — |
| Load Dump Protection | Yes (integrated) | — |
| Reverse Battery Protection | Yes (compatible with harshest requirements per family datasheet) | -16 V |
| Diagnostics | Current sense / status output | — |
| Protections | Overload, short-circuit, over-temperature, over-voltage | — |
| Packaging | Tape & Reel | — |
| مستوى MSL | MSL2 or MSL3 (per JEDEC J-STD-020) | MSL3 (per JEDEC J-STD-020) |
| RoHS Compliance | Compliant | — |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Diagnostic Output | — | Current-sense (IS) pin, analog/digital |
| درجة حرارة الوصلة التشغيلية | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |
| حالة RoHS | — | Compliant |