BTS70121EPAXUMA1 vs BTS70082EPAXUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTS70121EPAXUMA1 द्वारा Infineon और BTS70082EPAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ सक्रियविशेषता तुलना
| पैरामीटर | BTS70121EPAXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET+2 (Protected FET) | PROFET+2 (12 V, dual channel) |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 2 |
| आउटपुट कॉन्फ़िगरेशन | High-Side | — |
| Switch Type | N-Channel (2x8 mOhm integrated) | High-side N-channel MOSFET switch |
| अधिकतम आउटपुट करंट | 8.5 A | — |
| On-State Resistance (RDS(on)) | 2 x 8 mOhm (typical) | — |
| पैकेज | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Pin Pitch | 0.65 mm | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| ऑपरेटिंग तापमान रेंज | -40C to +150C (junction, AEC-Q100) | — |
| Supply Voltage (Vbb) | [DATA_NEEDED: Vbb operating range] | — |
| Load Dump Protection | Yes (integrated) | — |
| Reverse Battery Protection | Yes (compatible with harshest requirements per family datasheet) | -16 V |
| Diagnostics | Current sense / status output | — |
| Protections | Overload, short-circuit, over-temperature, over-voltage | — |
| Packaging | Tape & Reel | — |
| MSL स्तर | MSL2 or MSL3 (per JEDEC J-STD-020) | MSL3 (per JEDEC J-STD-020) |
| RoHS Compliance | Compliant | — |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Diagnostic Output | — | Current-sense (IS) pin, analog/digital |
| ऑपरेटिंग जंक्शन तापमान | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |
| RoHS स्थिति | — | Compliant |