BTS711L1XUMA1 vs BTS70402EPGXUMA1 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ BTS711L1XUMA1 بواسطة Infineon و BTS70402EPGXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

مقارنة المواصفات

المعامل BTS711L1XUMA1 BTS70402EPGXUMA1
العلامة التجارية Infineon Infineon
الفئة Power MOSFET Drivers Power MOSFET Drivers
حالة دورة الحياة نشط نشط
Product Type Smart High-Side Power Switch —
Number of Channels 4 4
البنية الطوبولوجية 1:1 N-Channel High-Side —
Nominal Load Current per Channel 1.7 A —
Operating Voltage Range 4.5 V to 28 V 6 V to 18 V nominal (load-dump tolerant to 40 V)
Overvoltage Clamp (Load Dump) 43 V —
On-State Resistance R_DS(on) 200 mΩ per channel (typical) —
Standby Current Very low (µA range, see datasheet) —
Protection Features Overload, current limit, short-circuit, thermal shutdown, overvoltage, reverse battery (with R_GND) Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Diagnostic Output Current sense / status feedback —
Load Type Resistive and inductive (with fast demagnetization) —
نطاق درجة حرارة التشغيل -40°C to +150°C (junction) -40 °C to +150 °C junction
العلبة PG-DSO-20-31 (exposed pad) PG-TSDSO-14 (exposed thermal pad)
نوع التركيب Surface Mount Surface Mount
Family Classic PROFET™ 12 V —
Automotive Grade AEC-Q100 qualified (PROFET family) —
حالة RoHS Compliant —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
الوظيفة — Smart High-Side Power Switch
تكوين الخرج — High-side, N-channel MOSFET
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر