BTS711L1XUMA1 vs BTS70402EPGXUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS711L1XUMA1 tarafından Infineon ve BTS70402EPGXUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS711L1XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 4 |
| Ağ Yapısı | 1:1 N-Channel High-Side | — |
| Nominal Load Current per Channel | 1.7 A | — |
| Operating Voltage Range | 4.5 V to 28 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Overvoltage Clamp (Load Dump) | 43 V | — |
| On-State Resistance R_DS(on) | 200 mΩ per channel (typical) | — |
| Standby Current | Very low (µA range, see datasheet) | — |
| Protection Features | Overload, current limit, short-circuit, thermal shutdown, overvoltage, reverse battery (with R_GND) | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Output | Current sense / status feedback | — |
| Load Type | Resistive and inductive (with fast demagnetization) | — |
| İşletim Sıcaklığı Aralığı | -40°C to +150°C (junction) | -40 °C to +150 °C junction |
| Paket | PG-DSO-20-31 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Montaj Türü | Surface Mount | Surface Mount |
| Family | Classic PROFET™ 12 V | — |
| Automotive Grade | AEC-Q100 qualified (PROFET family) | — |
| RoHS Durumu | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonksiyon | — | Smart High-Side Power Switch |
| Çıkış Konfigürasyonu | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |