ITS716GFUMA1 vs BTS3046SDRATMA1 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ ITS716GFUMA1 بواسطة Infineon و BTS3046SDRATMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

مقارنة المواصفات

المعامل ITS716GFUMA1 BTS3046SDRATMA1
العلامة التجارية Infineon Infineon
الفئة Power MOSFET Drivers Power MOSFET Drivers
حالة دورة الحياة نشط نشط
Product Type Smart High-Side Power Switch Smart Low-Side Power Switch (HITFET family)
Number of Channels 4 —
تكوين الخرج High-side (N-Channel MOSFET) —
Continuous Current per Channel 2.3 A —
On-State Resistance (RON) per Channel [DATA_NEEDED: Ron typical value] —
Operating Voltage Range (Vbb) 5 V to 36 V 4.5 V to 42 V
Load Dump Tolerance Up to 45 V —
Standby Current [DATA_NEEDED: Iq standby typical] —
Input Logic Levels CMOS/TTL compatible, parallel interface —
Diagnostic Output Open-drain fault flag, one per channel —
Protection Features Overload, short-circuit, over-temperature, over-voltage, ESD Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD
PWM Capability Up to 1 kHz —
نطاق درجة حرارة التشغيل -40 C to +85 C (industrial grade) -40 C to +150 C
العلبة PG-DSO-20-32 (20-pin SOIC, exposed pad) PG-TO252-3-11 (DPAK, 3-pin with tab)
المقاومة الحرارية، من الوصلة إلى المحيط [DATA_NEEDED: theta_JA value] —
نوع التركيب Surface Mount Surface Mount
مستوى MSL [DATA_NEEDED: MSL rating] —
حالة RoHS Compliant —
Manufacturer — Infineon Technologies
Switch Configuration — 1:1 N-Channel, single channel
Continuous Output Current — 3.6 A
On-State Resistance (Rds(on)) — 95 mOhm (0.095 ohm) typical
Load Type — Low-side switch (ground-referenced load)
Input Logic — CMOS-compatible with internal pull-down
Status Feedback — Yes (status output pin)
Automotive Qualification — AEC-Q100 (where variant specified)
RoHS / Lead-Free — Compliant / Yes

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر