ITS716GFUMA1 vs BTS3046SDRATMA1 तुलना

विस्तृत दोनों ओर की तुलना ITS716GFUMA1 द्वारा Infineon और BTS3046SDRATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
ITS716GFUMA1 ITS716GFUMA1 - 4-Ch Smart High-Side Switch 2.3A | Infineon

ITS716GFUMA1 - 4-Ch Smart High-Side Switch 2.3A | Infineon

ITS716GFUMA1 ✓ सक्रिय
Infineon
BTS3046SDRATMA1 BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर ITS716GFUMA1 BTS3046SDRATMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch Smart Low-Side Power Switch (HITFET family)
Number of Channels 4 —
आउटपुट कॉन्फ़िगरेशन High-side (N-Channel MOSFET) —
Continuous Current per Channel 2.3 A —
On-State Resistance (RON) per Channel [DATA_NEEDED: Ron typical value] —
Operating Voltage Range (Vbb) 5 V to 36 V 4.5 V to 42 V
Load Dump Tolerance Up to 45 V —
Standby Current [DATA_NEEDED: Iq standby typical] —
Input Logic Levels CMOS/TTL compatible, parallel interface —
Diagnostic Output Open-drain fault flag, one per channel —
Protection Features Overload, short-circuit, over-temperature, over-voltage, ESD Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD
PWM Capability Up to 1 kHz —
ऑपरेटिंग तापमान रेंज -40 C to +85 C (industrial grade) -40 C to +150 C
पैकेज PG-DSO-20-32 (20-pin SOIC, exposed pad) PG-TO252-3-11 (DPAK, 3-pin with tab)
थर्मल रेज़िस्टेंस, जंक्शन-टू-एम्बिएंट [DATA_NEEDED: theta_JA value] —
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर [DATA_NEEDED: MSL rating] —
RoHS स्थिति Compliant —
Manufacturer — Infineon Technologies
Switch Configuration — 1:1 N-Channel, single channel
Continuous Output Current — 3.6 A
On-State Resistance (Rds(on)) — 95 mOhm (0.095 ohm) typical
Load Type — Low-side switch (ground-referenced load)
Input Logic — CMOS-compatible with internal pull-down
Status Feedback — Yes (status output pin)
Automotive Qualification — AEC-Q100 (where variant specified)
RoHS / Lead-Free — Compliant / Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध