MRF6S9130HSR3 vs MRF6S9160HR3 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MRF6S9130HSR3 بواسطة NXP Semiconductors و MRF6S9160HR3 بواسطة NXP Semiconductors. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
NXP Semiconductors
MRF6S9130HSR3 - 27W 880MHz RF Power MOSFET | NXP Semiconductors
MRF6S9130HSR3 ✓ نشطمقارنة المواصفات
| المعامل | MRF6S9130HSR3 | MRF6S9160HR3 |
|---|---|---|
| العلامة التجارية | NXP Semiconductors | NXP Semiconductors |
| الفئة | MOSFETs | MOSFETs |
| حالة دورة الحياة | نشط | نشط |
| Manufacturer | NXP Semiconductors (formerly Freescale) | Freescale Semiconductor (now NXP Semiconductors) |
| Part Status | Active | — |
| نوع الترانزستور | Lateral N-Channel RF Power MOSFET (LDMOS) | — |
| Operating Frequency | 880 MHz | — |
| Drain-Source Voltage (Vdss) Max | 68 V | — |
| Drain Current (Id) Max | [DATA_NEEDED: maximum pulsed drain current] | — |
| Typical Quiescent Current (Idq) | 950 mA | — |
| Drain-Source On Resistance (Rds(on)) | [DATA_NEEDED: Rds(on) value] | — |
| Output Power (Pout) Avg | 27 W (N-CDMA single-carrier) | — |
| Power Gain (Gps) | 19.2 dB typical | — |
| Drain Efficiency | [DATA_NEEDED: drain efficiency figure] | — |
| Supply Voltage (Vdd) Recommended | 28 V | — |
| العلبة / الحالة | NI-780S (CASE 465-06, Style 1) ceramic flange | NI-780H-2L (CASE 465-06, STYLE 1), ceramic, flanged |
| نوع التركيب | Chassis / flange mount with screw-down | Chassis/Surface flange mount (screw-down) |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: Tj operating range] | — |
| Storage Temperature Range | [DATA_NEEDED: Tstg range] | — |
| عدد الأطراف | 3 | — |
| Style | Style 1 | — |
| Technology | LDMOS (laterally diffused MOS) | RF Power MOSFET (lateral N-channel, enhancement mode) |
| حالة RoHS | Compliant | unknown |
| Lead-Free | Yes | — |
| Packing | Tape & Reel (HSR3 suffix) | — |
| Primary Applications | N-CDMA, GSM, GSM EDGE base station PAs, 880-960 MHz multicarrier amplifiers | — |
| Frequency Band | — | 880 MHz (single-band cellular UHF) |
| Operating Frequency Range | — | [DATA_NEEDED: full datasheet frequency range] |
| Drain-Source Voltage (VDSS) | — | [DATA_NEEDED: VDSS rating] |
| Supply Voltage (VDD) | — | 28 V (typical operation) |
| Average Output Power (Pout avg) | — | 35 W (N-CDMA, 880 MHz) |
| Peak Output Power (Pout peak) | — | [DATA_NEEDED: peak Pout rating] |
| Power Gain (Gp) | — | 20.9 dB (typical at 880 MHz) |
| Drain Efficiency (ηD) | — | [DATA_NEEDED: efficiency at rated Pout] |
| Quiescent Bias Current (IDQ) | — | 1.2 A (typical) |
| Configuration | — | Single (single-ended, common-source) |
| Operating Mode | — | Enhancement mode, Class AB |
| Test Signal | — | Single N-CDMA |
| Maximum Power Dissipation | — | 565 W (absolute, per Partstack parametric record) |
| Lead Finish | — | [DATA_NEEDED: lead finish] |