SP485EN-L vs SP485EEN-L مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ SP485EN-L بواسطة MaxLinear و SP485EEN-L بواسطة MaxLinear. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | SP485EN-L | SP485EEN-L |
|---|---|---|
| العلامة التجارية | MaxLinear | MaxLinear |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Half-duplex differential transceiver | Half-duplex RS-422/RS-485 transceiver |
| Interface Standards | RS-422 and RS-485 | — |
| Maximum Data Rate | 5 Mbps | — |
| Supply Voltage Range | 4.75V to 5.25V | — |
| Nominal Supply Voltage | 5 V | — |
| نطاق درجة حرارة التشغيل | -40°C to +85°C | -40 C to +85 C |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Receiver Input Type | Differential Schmitt-trigger input | — |
| Process Technology | BiCMOS | — |
| العلبة | 8-pin SOIC | 8-pin SOIC |
| Package Width | 3.9 mm | — |
| Package Length | 4.9 mm | — |
| نوع التركيب | Surface mount | Surface mount |
| Transceiver Count per Package | 1 | — |
| Supply Decoupling Requirement | [DATA_NEEDED: recommended decoupling capacitor value and ESR] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: receiver and driver propagation delay] | — |
| Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Shutdown Function | [DATA_NEEDED: shutdown or power-save support] | — |
| حالة RoHS | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| معدل البيانات | — | 10,000 kbps |
| Alternate Family Data Rate | — | Up to 5 Mbps |
| جهد التغذية التشغيلي | — | 4.75 V to 5.25 V |
| ESD Tolerance, Human Body Model | — | Greater than 15 kV |
| ESD Tolerance, Air Discharge Method | — | Greater than 15 kV under IEC1000-4-2 |
| Supported Protocols | — | RS-422 and RS-485 |
| Power Classification | — | Low-power interface IC |
| EMI Characteristics | — | Enhanced low-EMI design |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |