SP485EN-L vs SP485EEN-L तुलना
विस्तृत दोनों ओर की तुलना SP485EN-L द्वारा MaxLinear और SP485EEN-L द्वारा MaxLinear. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | SP485EN-L | SP485EEN-L |
|---|---|---|
| ब्रांड | MaxLinear | MaxLinear |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Half-duplex differential transceiver | Half-duplex RS-422/RS-485 transceiver |
| Interface Standards | RS-422 and RS-485 | — |
| Maximum Data Rate | 5 Mbps | — |
| Supply Voltage Range | 4.75V to 5.25V | — |
| Nominal Supply Voltage | 5 V | — |
| ऑपरेटिंग तापमान रेंज | -40°C to +85°C | -40 C to +85 C |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Receiver Input Type | Differential Schmitt-trigger input | — |
| Process Technology | BiCMOS | — |
| पैकेज | 8-pin SOIC | 8-pin SOIC |
| Package Width | 3.9 mm | — |
| Package Length | 4.9 mm | — |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Transceiver Count per Package | 1 | — |
| Supply Decoupling Requirement | [DATA_NEEDED: recommended decoupling capacitor value and ESR] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: receiver and driver propagation delay] | — |
| Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Shutdown Function | [DATA_NEEDED: shutdown or power-save support] | — |
| RoHS स्थिति | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| डेटा दर | — | 10,000 kbps |
| Alternate Family Data Rate | — | Up to 5 Mbps |
| ऑपरेटिंग सप्लाई वोल्टेज | — | 4.75 V to 5.25 V |
| ESD Tolerance, Human Body Model | — | Greater than 15 kV |
| ESD Tolerance, Air Discharge Method | — | Greater than 15 kV under IEC1000-4-2 |
| Supported Protocols | — | RS-422 and RS-485 |
| Power Classification | — | Low-power interface IC |
| EMI Characteristics | — | Enhanced low-EMI design |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |