SP485EN-L vs SP485EEN-L Сравнение

Подробное сравнение бок о бок SP485EN-L от MaxLinear и SP485EEN-L от MaxLinear. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

MaxLinear
SP485EN-L SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L ✓ Активен
MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ Активен

Сравнение характеристик

Параметр SP485EN-L SP485EEN-L
Бренд MaxLinear MaxLinear
Категория Interface ICs Interface ICs
Статус жизненного цикла Активен Активен
Product Type Half-duplex differential transceiver Half-duplex RS-422/RS-485 transceiver
Interface Standards RS-422 and RS-485 —
Maximum Data Rate 5 Mbps —
Supply Voltage Range 4.75V to 5.25V —
Nominal Supply Voltage 5 V —
Диапазон рабочих температур -40°C to +85°C -40 C to +85 C
Driver and Receiver Count 1 differential driver and 1 differential receiver —
Duplex Mode Half-duplex Half-duplex
Receiver Input Type Differential Schmitt-trigger input —
Process Technology BiCMOS —
Корпус 8-pin SOIC 8-pin SOIC
Package Width 3.9 mm —
Package Length 4.9 mm —
Тип монтажа Surface mount Surface mount
Transceiver Count per Package 1 —
Supply Decoupling Requirement [DATA_NEEDED: recommended decoupling capacitor value and ESR] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Propagation Delay [DATA_NEEDED: receiver and driver propagation delay] —
Input Impedance [DATA_NEEDED: receiver input impedance] —
Shutdown Function [DATA_NEEDED: shutdown or power-save support] —
Статус RoHS unknown —
REACH Status unknown —
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Transmitter and Receiver Count — 1 transmitter and 1 receiver
Скорость передачи данных — 10,000 kbps
Alternate Family Data Rate — Up to 5 Mbps
Рабочее напряжение питания — 4.75 V to 5.25 V
ESD Tolerance, Human Body Model — Greater than 15 kV
ESD Tolerance, Air Discharge Method — Greater than 15 kV under IEC1000-4-2
Supported Protocols — RS-422 and RS-485
Power Classification — Low-power interface IC
EMI Characteristics — Enhanced low-EMI design
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Даташиты & ресурсы

Все товары Создать BOM Запросить цену