SP485EN-L vs SP485EEN-L So sánh

So sánh chi tiết song song của SP485EN-L bằng MaxLinear và SP485EEN-L bằng MaxLinear. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

MaxLinear
SP485EN-L SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L ✓ Hoạt động
MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SP485EN-L SP485EEN-L
Thương hiệu MaxLinear MaxLinear
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex differential transceiver Half-duplex RS-422/RS-485 transceiver
Interface Standards RS-422 and RS-485 —
Maximum Data Rate 5 Mbps —
Supply Voltage Range 4.75V to 5.25V —
Nominal Supply Voltage 5 V —
Khoảng nhiệt độ hoạt động -40°C to +85°C -40 C to +85 C
Driver and Receiver Count 1 differential driver and 1 differential receiver —
Duplex Mode Half-duplex Half-duplex
Receiver Input Type Differential Schmitt-trigger input —
Process Technology BiCMOS —
Hộp 8-pin SOIC 8-pin SOIC
Package Width 3.9 mm —
Package Length 4.9 mm —
Kiểu lắp đặt Surface mount Surface mount
Transceiver Count per Package 1 —
Supply Decoupling Requirement [DATA_NEEDED: recommended decoupling capacitor value and ESR] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Propagation Delay [DATA_NEEDED: receiver and driver propagation delay] —
Input Impedance [DATA_NEEDED: receiver input impedance] —
Shutdown Function [DATA_NEEDED: shutdown or power-save support] —
Trạng thái RoHS unknown —
REACH Status unknown —
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Transmitter and Receiver Count — 1 transmitter and 1 receiver
Tốc độ dữ liệu — 10,000 kbps
Alternate Family Data Rate — Up to 5 Mbps
Điện áp cung cấp hoạt động — 4.75 V to 5.25 V
ESD Tolerance, Human Body Model — Greater than 15 kV
ESD Tolerance, Air Discharge Method — Greater than 15 kV under IEC1000-4-2
Supported Protocols — RS-422 and RS-485
Power Classification — Low-power interface IC
EMI Characteristics — Enhanced low-EMI design
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá