TAS5142DDVR vs TAS5342DDVR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ TAS5142DDVR بواسطة Texas Instruments و TAS5342DDVR بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
TAS5142DDVR - 100W Stereo Class-D Power Stage | Texas Instruments (Tape & Reel)
TAS5142DDVR ✓ نشطTexas Instruments
TAS5342DDVR - 100W Stereo Class D Power Stage | Texas Instruments (Tape & Reel)
TAS5342DDVR ✓ نشطمقارنة المواصفات
| المعامل | TAS5142DDVR | TAS5342DDVR |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Stereo Class-D audio amplifier power stage | Stereo digital amplifier power stage |
| Channel Count | 2 channels | — |
| Stereo Output Power | 100 W | — |
| Mono Output Power | 200 W | — |
| Supply Voltage Range | 0 V to 34 V | 0 V to 34 V |
| Input Signal Type | PWM | — |
| Amplifier Topology | Class-D | — |
| Supported BTL Loads | 4 ohm, 6 ohm, and 8 ohm | — |
| Supported PBTL Loads | 2 ohm and 3 ohm | — |
| Signal-to-Noise Ratio | >100 dB A-weighted | — |
| Total Harmonic Distortion Plus Noise | <0.1% at 1 W | — |
| العلبة | 44-pin HTSSOP (DDV) | 44-HTSSOP |
| نوع التركيب | Surface Mount | — |
| عدد الأطراف | 44 pins | — |
| Thermal Construction | Thermally enhanced HTSSOP | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | 0 C to 70 C |
| تيار السكون | [DATA_NEEDED: quiescent current] | — |
| Protection Functions | [DATA_NEEDED: protection functions] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Amplifier Class | — | Class D |
| Maximum Output Power | — | 100 W per channel |
| Channel Configuration | — | 1-channel mono or 2-channel stereo |
| Speaker Output Configuration | — | Bridge-tied load (BTL) |
| Typical Dual Supply Voltage | — | 10.8 V to 13.2 V |
| Maximum Load Resistance | — | 8 ohm |
| Input Signal | — | Differential input |
| Output Signal | — | Differential output |
| Maximum Power Dissipation | — | 2000 mW typical |
| Harmonic Distortion | — | [DATA_NEEDED: harmonic distortion specification] |
| Integrated Noise | — | [DATA_NEEDED: integrated noise specification] |
| Idle Current | — | [DATA_NEEDED: idle current specification] |
| Protection Features | — | Integrated protection system for multiple fault conditions |