TAS5142DDVR vs TAS5342DDVR Perbandingan
Perbandingan bersamaan detil TAS5142DDVR dari Texas Instruments dan TAS5342DDVR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
TAS5142DDVR - 100W Stereo Class-D Power Stage | Texas Instruments (Tape & Reel)
TAS5142DDVR ✓ AktifTexas Instruments
TAS5342DDVR - 100W Stereo Class D Power Stage | Texas Instruments (Tape & Reel)
TAS5342DDVR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | TAS5142DDVR | TAS5342DDVR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Stereo Class-D audio amplifier power stage | Stereo digital amplifier power stage |
| Channel Count | 2 channels | — |
| Stereo Output Power | 100 W | — |
| Mono Output Power | 200 W | — |
| Supply Voltage Range | 0 V to 34 V | 0 V to 34 V |
| Input Signal Type | PWM | — |
| Amplifier Topology | Class-D | — |
| Supported BTL Loads | 4 ohm, 6 ohm, and 8 ohm | — |
| Supported PBTL Loads | 2 ohm and 3 ohm | — |
| Signal-to-Noise Ratio | >100 dB A-weighted | — |
| Total Harmonic Distortion Plus Noise | <0.1% at 1 W | — |
| Paket | 44-pin HTSSOP (DDV) | 44-HTSSOP |
| Tipe Mounting | Surface Mount | — |
| Jumlah Pin | 44 pins | — |
| Thermal Construction | Thermally enhanced HTSSOP | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | 0 C to 70 C |
| Arus Memerintah | [DATA_NEEDED: quiescent current] | — |
| Protection Functions | [DATA_NEEDED: protection functions] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Amplifier Class | — | Class D |
| Maximum Output Power | — | 100 W per channel |
| Channel Configuration | — | 1-channel mono or 2-channel stereo |
| Speaker Output Configuration | — | Bridge-tied load (BTL) |
| Typical Dual Supply Voltage | — | 10.8 V to 13.2 V |
| Maximum Load Resistance | — | 8 ohm |
| Input Signal | — | Differential input |
| Output Signal | — | Differential output |
| Maximum Power Dissipation | — | 2000 mW typical |
| Harmonic Distortion | — | [DATA_NEEDED: harmonic distortion specification] |
| Integrated Noise | — | [DATA_NEEDED: integrated noise specification] |
| Idle Current | — | [DATA_NEEDED: idle current specification] |
| Protection Features | — | Integrated protection system for multiple fault conditions |