TAS5142DDVR vs TAS5342DDVR तुलना
विस्तृत दोनों ओर की तुलना TAS5142DDVR द्वारा Texas Instruments और TAS5342DDVR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
TAS5142DDVR - 100W Stereo Class-D Power Stage | Texas Instruments (Tape & Reel)
TAS5142DDVR ✓ सक्रियTexas Instruments
TAS5342DDVR - 100W Stereo Class D Power Stage | Texas Instruments (Tape & Reel)
TAS5342DDVR ✓ सक्रियविशेषता तुलना
| पैरामीटर | TAS5142DDVR | TAS5342DDVR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Stereo Class-D audio amplifier power stage | Stereo digital amplifier power stage |
| Channel Count | 2 channels | — |
| Stereo Output Power | 100 W | — |
| Mono Output Power | 200 W | — |
| Supply Voltage Range | 0 V to 34 V | 0 V to 34 V |
| Input Signal Type | PWM | — |
| Amplifier Topology | Class-D | — |
| Supported BTL Loads | 4 ohm, 6 ohm, and 8 ohm | — |
| Supported PBTL Loads | 2 ohm and 3 ohm | — |
| Signal-to-Noise Ratio | >100 dB A-weighted | — |
| Total Harmonic Distortion Plus Noise | <0.1% at 1 W | — |
| पैकेज | 44-pin HTSSOP (DDV) | 44-HTSSOP |
| माउंटिंग प्रकार | Surface Mount | — |
| पिन काउंट | 44 pins | — |
| Thermal Construction | Thermally enhanced HTSSOP | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | 0 C to 70 C |
| क्वाइसेंट करंट | [DATA_NEEDED: quiescent current] | — |
| Protection Functions | [DATA_NEEDED: protection functions] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Amplifier Class | — | Class D |
| Maximum Output Power | — | 100 W per channel |
| Channel Configuration | — | 1-channel mono or 2-channel stereo |
| Speaker Output Configuration | — | Bridge-tied load (BTL) |
| Typical Dual Supply Voltage | — | 10.8 V to 13.2 V |
| Maximum Load Resistance | — | 8 ohm |
| Input Signal | — | Differential input |
| Output Signal | — | Differential output |
| Maximum Power Dissipation | — | 2000 mW typical |
| Harmonic Distortion | — | [DATA_NEEDED: harmonic distortion specification] |
| Integrated Noise | — | [DATA_NEEDED: integrated noise specification] |
| Idle Current | — | [DATA_NEEDED: idle current specification] |
| Protection Features | — | Integrated protection system for multiple fault conditions |