TAS5142DDVR vs TAS5342DDVR So sánh
So sánh chi tiết song song của TAS5142DDVR bằng Texas Instruments và TAS5342DDVR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
TAS5142DDVR - 100W Stereo Class-D Power Stage | Texas Instruments (Tape & Reel)
TAS5142DDVR ✓ Hoạt độngTexas Instruments
TAS5342DDVR - 100W Stereo Class D Power Stage | Texas Instruments (Tape & Reel)
TAS5342DDVR ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | TAS5142DDVR | TAS5342DDVR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Stereo Class-D audio amplifier power stage | Stereo digital amplifier power stage |
| Channel Count | 2 channels | — |
| Stereo Output Power | 100 W | — |
| Mono Output Power | 200 W | — |
| Supply Voltage Range | 0 V to 34 V | 0 V to 34 V |
| Input Signal Type | PWM | — |
| Amplifier Topology | Class-D | — |
| Supported BTL Loads | 4 ohm, 6 ohm, and 8 ohm | — |
| Supported PBTL Loads | 2 ohm and 3 ohm | — |
| Signal-to-Noise Ratio | >100 dB A-weighted | — |
| Total Harmonic Distortion Plus Noise | <0.1% at 1 W | — |
| Hộp | 44-pin HTSSOP (DDV) | 44-HTSSOP |
| Kiểu lắp đặt | Surface Mount | — |
| Số chân | 44 pins | — |
| Thermal Construction | Thermally enhanced HTSSOP | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | 0 C to 70 C |
| Điện áp yên tĩnh | [DATA_NEEDED: quiescent current] | — |
| Protection Functions | [DATA_NEEDED: protection functions] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Amplifier Class | — | Class D |
| Maximum Output Power | — | 100 W per channel |
| Channel Configuration | — | 1-channel mono or 2-channel stereo |
| Speaker Output Configuration | — | Bridge-tied load (BTL) |
| Typical Dual Supply Voltage | — | 10.8 V to 13.2 V |
| Maximum Load Resistance | — | 8 ohm |
| Input Signal | — | Differential input |
| Output Signal | — | Differential output |
| Maximum Power Dissipation | — | 2000 mW typical |
| Harmonic Distortion | — | [DATA_NEEDED: harmonic distortion specification] |
| Integrated Noise | — | [DATA_NEEDED: integrated noise specification] |
| Idle Current | — | [DATA_NEEDED: idle current specification] |
| Protection Features | — | Integrated protection system for multiple fault conditions |