A3P060-1VQ100 - 60K Gate ProASIC3 FPGA | Microchip Technology
MPN: A3P060-1VQ100 ✓ نشطA3P060-1VQ100 نظرة عامة
A ProASIC3 FPGA is a field-programmable gate array, a semiconductor in the FPGA and programmable-logic-device hierarchy. Unlike a fixed-function application-specific integrated circuit, its logic interconnect, I/O, and system functions can be configured after manufacture. This makes the A3P060 suitable for low-to-medium-complexity embedded control, interface bridging, signal processing, and compact industrial equipment where programmable logic is more valuable than the very high capacity of a large FPGA.
The device provides 18,432 user bits of configuration memory, 71 I/O, and approximately 60,000 logic gates in a compact VQFP-100 package. Its 1.5 V operating supply supports integration into low-voltage digital systems. The commercial-temperature ordering option is intended for designs operating across the stated 0 to +85 C range, subject to the complete electrical and thermal limits in the manufacturer documentation.
The ProASIC3 architecture uses flash-based configuration, allowing the programmed logic image to be retained without continuously loading it from an external programmable memory. The 60K-gate device provides more logic resources than a simple CPLD while maintaining a relatively small package and a modest pin count. Its 71 available I/O support communication peripherals, control logic, status signaling, and external bus interfaces, subject to the voltage and timing constraints of the selected bank configuration.
Typical uses include industrial control modules, data-acquisition front ends, protocol converters, embedded test equipment, and low-power supervisory logic. A design can use the A3P060 to consolidate parallel control logic, buffer or translate an external interface, implement deterministic state machines, or add programmable glue logic between larger processors and discrete peripherals.
PCB design should preserve the manufacturer's recommended power, ground, decoupling, and clock-routing guidance. Because the VQFP-100 package has closely spaced leads, careful footprint verification, solder-paste control, thermal management, and signal-integrity review are important. Confirm programming voltage, I/O standards, supported clock sources, and unused-pin treatment in the ProASIC3 documentation before releasing a production layout.
This product page combines the A3P060-1VQ100 electrical identity, package information, ordering distinctions, direct replacement options, and practical implementation guidance. It is designed to accelerate component selection while keeping the distinction between verified ordering options, speed grades, temperature grades, and broader programmable-logic alternatives clear.
بدائل مباشرة لـ A3P060-1VQ100 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع A3P060-1VQ100 (نفس عامل الشكل والبصمة) — يختلف في Configuration Memory, Process Technology, Mounting Type, Package Type, System Gates.
A3P060-VQ100
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←A3P060-VQ100I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←A3P060-VQ100IY
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
A3P060-VQG100I
✅ بديل مباشر✓ متوفر في المخزون
$6.95 / وحدة
عرض ورقة البيانات ←A3P060-1VQ100 الحدود القصوى والخصائص الكهربائية
| Device Type | ProASIC3 field-programmable gate array (FPGA) |
| Logic Capacity | 60K gates |
| Logic Elements | Approximately 700 logic elements |
| Configuration Memory | 18,432 bits |
| Configuration Technology | Flash-based configuration |
| Number of I/O | 71 I/O |
| جهد التغذية التشغيلي | 1.5 V |
| Maximum Performance | 272 MHz |
| Process Technology | 130 nm |
| Speed Grade | Grade 1 |
| Temperature Grade | Commercial |
| درجة حرارة التشغيل | 0 C to +85 C |
| Package Type | VQFP-100 |
| Package Body Size | 14 mm x 14 mm |
| Lead Count | 100 leads |
| نوع التركيب | Surface-mount technology (SMT) |
| Packaging Media | Tray |
| Product Family | ProASIC3 Flash Family |
| حالة RoHS | Compliant |
| Lead-Free Status | Pb-free |
دليل تكوين أطراف A3P060-1VQ100 14 mm x 14 mm
تكوين الأطراف لـ A3P060-1VQ100 (حزمة 14 mm x 14 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ A3P060-1VQ100.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
A3P060-1VQ100 مناسب لـ 6 التطبيقs: Industrial Control and Logic Consolidation, Data Acquisition Front End, Protocol Conversion and Interface Bridging, Embedded Test and Measurement Control, Automotive Accessory Control, Programmable Logic Peripherals.
Industrial Control and Logic Consolidation
The A3P060-1VQ100 suits compact industrial modules that need programmable control logic between sensors, actuators, and a host processor. Its 60K-gate ProASIC3 architecture and approximately 700 logic elements can implement state machines, interlocks, alarm logic, timing sequences, and I/O expansion. With 71 I/O and a 1.5 V operating supply, it provides substantial board-level flexibility in a 100-lead VQFP package. Designers should place the device where its commercial 0 to +85 C grade matches the enclosure environment, use flash configuration for maintenance flexibility, and verify all I/O standards against the selected bank configuration.
موصى به
Data Acquisition Front End
The A3P060-1VQ100 can serve as the timing, control, and interface layer in a compact data-acquisition front end. Its 71 I/O provide connections for sensor conditioning, trigger handling, status flags, and peripheral control, while approximately 700 logic elements can implement deterministic acquisition sequences. The flash-based ProASIC3 architecture permits configuration changes without a separate volatile boot memory. Engineers should use the available I/O budget carefully, confirm supported voltage standards, and account for the 100-lead VQFP footprint when planning routing and thermal performance.
موصى به
Protocol Conversion and Interface Bridging
A3P060-1VQ100 is well suited to protocol converters and interface bridges that require parallel-to-serial logic, framing, buffering, or timing compatibility between dissimilar systems. The 60K-gate capacity provides more programmable logic than a basic CPLD, while 18,432 configuration bits support a defined control architecture and 71 I/O permit external bus and status connections. Its 272 MHz listed maximum performance can support appropriately designed high-speed logic paths. Engineers should verify which I/O standards and clocking resources are available for the intended interface rather than assuming every pin has identical capabilities.
موصى به
Embedded Test and Measurement Control
The A3P060-1VQ100 can implement sequencing, pattern generation, channel control, and data routing in embedded test equipment. Its approximately 700 logic elements and 71 I/O are useful for coordinating instruments, controlling relays, capturing status signals, and applying programmable test sequences. Flash-based configuration allows a repeatable configuration to be stored directly in the device and simplifies field updates. For measurement accuracy, keep digital control paths separated from sensitive analog routing and validate timing margins, output loading, and I/O voltage constraints against the complete ProASIC3 documentation.
موصى به
Automotive Accessory Control
A3P060-1VQ100 can be evaluated for accessory-control, body-logic, and sensor-hub functions where compact programmable logic is needed around a host microcontroller. Its 60K-gate capacity and 71 I/O permit centralized switch management, debounce logic, diagnostics, and communication adaptation. The VQFP-100 package supports integration on boards with conventional surface-mount assembly processes. However, the exact A3P060-1VQ100 ordering option is commercial grade, so an automotive design must confirm whether its temperature and qualification requirements are met or select a suitably qualified device explicitly.
موصى به
Programmable Logic Peripherals
The A3P060-1VQ100 is useful for programmable peripheral blocks that combine buffer management, pulse shaping, timeout generation, and bus arbitration. With approximately 700 logic elements, the device can consolidate several fixed functions while retaining reprogrammability, and its 1.5 V supply can fit low-voltage logic systems. The 100-lead VQFP package exposes 71 I/O for peripheral connections and fixed-function pins. Designers should use the manufacturer pin-description table during assignment, reserve configuration pins correctly, and confirm that clock, supply, and I/O-bank requirements can be satisfied simultaneously.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ A3P060-1VQ100 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | A3P060-VQ100 | A3P060-VQ100I | A3P060-VQ100IY | A3P060-VQG100I |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | VQFP-100 | VQFP-100 - same | VQFP-100 - same | VQFP-100 - same | VQFP-100 - same |
| Logic Capacity | 60K gates | 60K gates | 60K gates | 60K gates | 60K gates |
| Logic Elements | Approximately 700 logic elements | Approximately 700 logic elements | Approximately 700 logic elements | Approximately 700 logic elements | Approximately 700 logic elements |
| Number of I/O | 71 I/O | 71 I/O | 71 I/O | 71 I/O | 71 I/O |
| Configuration Memory | 18,432 bits | 18,432 bits | 18,432 bits | 18,432 bits | 18,432 bits |
| Operating Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Maximum Performance | 272 MHz | 272 MHz | 272 MHz | 272 MHz | 272 MHz |
| Ordering Grade | Commercial, speed grade 1 | Different speed/temperature ordering suffix | Industrial suffix | Industrial-oriented suffix | G and I suffix combination |
| Special Feature | Flash-based configuration | Flash-based configuration | Flash-based configuration | Flash-based configuration | Flash-based configuration |
أبرز الفروقات
- Commercial speed-grade-1 configuration (مقابلA3P060-VQ100I)
- Direct 100-lead footprint compatibility (مقابلA3P060-VQG100I)
- Substantial programmable logic in a compact package (مقابلA3P060-VQ100IY)
ملاحظات التصميم
Use the manufacturer VQFP-100 land pattern and verify it against the selected package drawing before releasing Gerber files. Route the 71 configurable I/O with attention to their supported voltage standards, and place decoupling capacitors close to the device's supply and ground pins. Confirm the exposed pad or thermal requirements from the exact package documentation because thermal-via density and copper treatment affect both heat removal and assembly yield.
Assign configuration, clock, reset, and programming functions directly from the ProASIC3 pin-description table. Do not treat an unused programmable I/O as equivalent to a dedicated configuration pin, because reserved functions can have required pull states. Keep sensitive clock and external interface routes short, maintain continuous ground references beneath signal paths, and review every VQFP lead for clearance before beginning fabrication.
The A3P060 base name does not identify a fully interchangeable orderable configuration. Confirm speed grade, temperature grade, package suffix, and packing media for every board variant. If replacing A3P060-1VQ100 with a VQ100, VQ100I, VQ100IY, or VQG100I device, compare the exact ordering details and timing specifications. A shared package does not guarantee identical environmental or grade requirements.
معلومات الامتثال
A component listing identifies the exact MPN as RoHS compliant and lead-free. No specific AEC-Q100 qualification is identified for A3P060-1VQ100.