A3P060-1VQ100 - 60K Gate ProASIC3 FPGA | Microchip Technology
MPN: A3P060-1VQ100 ✓ Hoạt độngA3P060-1VQ100 Tóm tắt
A ProASIC3 FPGA is a field-programmable gate array, a semiconductor in the FPGA and programmable-logic-device hierarchy. Unlike a fixed-function application-specific integrated circuit, its logic interconnect, I/O, and system functions can be configured after manufacture. This makes the A3P060 suitable for low-to-medium-complexity embedded control, interface bridging, signal processing, and compact industrial equipment where programmable logic is more valuable than the very high capacity of a large FPGA.
The device provides 18,432 user bits of configuration memory, 71 I/O, and approximately 60,000 logic gates in a compact VQFP-100 package. Its 1.5 V operating supply supports integration into low-voltage digital systems. The commercial-temperature ordering option is intended for designs operating across the stated 0 to +85 C range, subject to the complete electrical and thermal limits in the manufacturer documentation.
The ProASIC3 architecture uses flash-based configuration, allowing the programmed logic image to be retained without continuously loading it from an external programmable memory. The 60K-gate device provides more logic resources than a simple CPLD while maintaining a relatively small package and a modest pin count. Its 71 available I/O support communication peripherals, control logic, status signaling, and external bus interfaces, subject to the voltage and timing constraints of the selected bank configuration.
Typical uses include industrial control modules, data-acquisition front ends, protocol converters, embedded test equipment, and low-power supervisory logic. A design can use the A3P060 to consolidate parallel control logic, buffer or translate an external interface, implement deterministic state machines, or add programmable glue logic between larger processors and discrete peripherals.
PCB design should preserve the manufacturer's recommended power, ground, decoupling, and clock-routing guidance. Because the VQFP-100 package has closely spaced leads, careful footprint verification, solder-paste control, thermal management, and signal-integrity review are important. Confirm programming voltage, I/O standards, supported clock sources, and unused-pin treatment in the ProASIC3 documentation before releasing a production layout.
This product page combines the A3P060-1VQ100 electrical identity, package information, ordering distinctions, direct replacement options, and practical implementation guidance. It is designed to accelerate component selection while keeping the distinction between verified ordering options, speed grades, temperature grades, and broader programmable-logic alternatives clear.
Bộ thay thế dễ dàng lắp đặt cho A3P060-1VQ100 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với A3P060-1VQ100 (cùng hình factor và footprint) — khác nhau ở Configuration Memory, Process Technology, Mounting Type, Package Type, System Gates.
A3P060-VQ100
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P060-VQ100I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P060-VQ100IY
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P060-VQG100I
✅ Drop-In✓ Còn hàng
$6.95 / Đơn vị
Xem tài liệu →A3P060-1VQ100 Tỷ lệ tối đa & tính chất điện
| Device Type | ProASIC3 field-programmable gate array (FPGA) |
| Logic Capacity | 60K gates |
| Logic Elements | Approximately 700 logic elements |
| Configuration Memory | 18,432 bits |
| Configuration Technology | Flash-based configuration |
| Number of I/O | 71 I/O |
| Điện áp cung cấp hoạt động | 1.5 V |
| Maximum Performance | 272 MHz |
| Process Technology | 130 nm |
| Speed Grade | Grade 1 |
| Temperature Grade | Commercial |
| Nhiệt độ hoạt động | 0 C to +85 C |
| Package Type | VQFP-100 |
| Package Body Size | 14 mm x 14 mm |
| Lead Count | 100 leads |
| Kiểu lắp đặt | Surface-mount technology (SMT) |
| Packaging Media | Tray |
| Product Family | ProASIC3 Flash Family |
| Trạng thái RoHS | Compliant |
| Lead-Free Status | Pb-free |
Hướng dẫn cấu hình chân A3P060-1VQ100 14 mm x 14 mm
Cấu hình chân cho A3P060-1VQ100 (14 mm x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho A3P060-1VQ100.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
A3P060-1VQ100 phù hợp cho 6 Áp dụngs: Industrial Control and Logic Consolidation, Data Acquisition Front End, Protocol Conversion and Interface Bridging, Embedded Test and Measurement Control, Automotive Accessory Control, Programmable Logic Peripherals.
Industrial Control and Logic Consolidation
The A3P060-1VQ100 suits compact industrial modules that need programmable control logic between sensors, actuators, and a host processor. Its 60K-gate ProASIC3 architecture and approximately 700 logic elements can implement state machines, interlocks, alarm logic, timing sequences, and I/O expansion. With 71 I/O and a 1.5 V operating supply, it provides substantial board-level flexibility in a 100-lead VQFP package. Designers should place the device where its commercial 0 to +85 C grade matches the enclosure environment, use flash configuration for maintenance flexibility, and verify all I/O standards against the selected bank configuration.
Được đề xuất
Data Acquisition Front End
The A3P060-1VQ100 can serve as the timing, control, and interface layer in a compact data-acquisition front end. Its 71 I/O provide connections for sensor conditioning, trigger handling, status flags, and peripheral control, while approximately 700 logic elements can implement deterministic acquisition sequences. The flash-based ProASIC3 architecture permits configuration changes without a separate volatile boot memory. Engineers should use the available I/O budget carefully, confirm supported voltage standards, and account for the 100-lead VQFP footprint when planning routing and thermal performance.
Được đề xuất
Protocol Conversion and Interface Bridging
A3P060-1VQ100 is well suited to protocol converters and interface bridges that require parallel-to-serial logic, framing, buffering, or timing compatibility between dissimilar systems. The 60K-gate capacity provides more programmable logic than a basic CPLD, while 18,432 configuration bits support a defined control architecture and 71 I/O permit external bus and status connections. Its 272 MHz listed maximum performance can support appropriately designed high-speed logic paths. Engineers should verify which I/O standards and clocking resources are available for the intended interface rather than assuming every pin has identical capabilities.
Được đề xuất
Embedded Test and Measurement Control
The A3P060-1VQ100 can implement sequencing, pattern generation, channel control, and data routing in embedded test equipment. Its approximately 700 logic elements and 71 I/O are useful for coordinating instruments, controlling relays, capturing status signals, and applying programmable test sequences. Flash-based configuration allows a repeatable configuration to be stored directly in the device and simplifies field updates. For measurement accuracy, keep digital control paths separated from sensitive analog routing and validate timing margins, output loading, and I/O voltage constraints against the complete ProASIC3 documentation.
Được đề xuất
Automotive Accessory Control
A3P060-1VQ100 can be evaluated for accessory-control, body-logic, and sensor-hub functions where compact programmable logic is needed around a host microcontroller. Its 60K-gate capacity and 71 I/O permit centralized switch management, debounce logic, diagnostics, and communication adaptation. The VQFP-100 package supports integration on boards with conventional surface-mount assembly processes. However, the exact A3P060-1VQ100 ordering option is commercial grade, so an automotive design must confirm whether its temperature and qualification requirements are met or select a suitably qualified device explicitly.
Được đề xuất
Programmable Logic Peripherals
The A3P060-1VQ100 is useful for programmable peripheral blocks that combine buffer management, pulse shaping, timeout generation, and bus arbitration. With approximately 700 logic elements, the device can consolidate several fixed functions while retaining reprogrammability, and its 1.5 V supply can fit low-voltage logic systems. The 100-lead VQFP package exposes 71 I/O for peripheral connections and fixed-function pins. Designers should use the manufacturer pin-description table during assignment, reserve configuration pins correctly, and confirm that clock, supply, and I/O-bank requirements can be satisfied simultaneously.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho A3P060-1VQ100 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | A3P060-VQ100 | A3P060-VQ100I | A3P060-VQ100IY | A3P060-VQG100I |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | VQFP-100 | VQFP-100 - same | VQFP-100 - same | VQFP-100 - same | VQFP-100 - same |
| Logic Capacity | 60K gates | 60K gates | 60K gates | 60K gates | 60K gates |
| Logic Elements | Approximately 700 logic elements | Approximately 700 logic elements | Approximately 700 logic elements | Approximately 700 logic elements | Approximately 700 logic elements |
| Number of I/O | 71 I/O | 71 I/O | 71 I/O | 71 I/O | 71 I/O |
| Configuration Memory | 18,432 bits | 18,432 bits | 18,432 bits | 18,432 bits | 18,432 bits |
| Operating Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Maximum Performance | 272 MHz | 272 MHz | 272 MHz | 272 MHz | 272 MHz |
| Ordering Grade | Commercial, speed grade 1 | Different speed/temperature ordering suffix | Industrial suffix | Industrial-oriented suffix | G and I suffix combination |
| Special Feature | Flash-based configuration | Flash-based configuration | Flash-based configuration | Flash-based configuration | Flash-based configuration |
Bảo phân biệt quan trọng
- Commercial speed-grade-1 configuration (vsA3P060-VQ100I)
- Direct 100-lead footprint compatibility (vsA3P060-VQG100I)
- Substantial programmable logic in a compact package (vsA3P060-VQ100IY)
Ghi chú thiết kế
Use the manufacturer VQFP-100 land pattern and verify it against the selected package drawing before releasing Gerber files. Route the 71 configurable I/O with attention to their supported voltage standards, and place decoupling capacitors close to the device's supply and ground pins. Confirm the exposed pad or thermal requirements from the exact package documentation because thermal-via density and copper treatment affect both heat removal and assembly yield.
Assign configuration, clock, reset, and programming functions directly from the ProASIC3 pin-description table. Do not treat an unused programmable I/O as equivalent to a dedicated configuration pin, because reserved functions can have required pull states. Keep sensitive clock and external interface routes short, maintain continuous ground references beneath signal paths, and review every VQFP lead for clearance before beginning fabrication.
The A3P060 base name does not identify a fully interchangeable orderable configuration. Confirm speed grade, temperature grade, package suffix, and packing media for every board variant. If replacing A3P060-1VQ100 with a VQ100, VQ100I, VQ100IY, or VQG100I device, compare the exact ordering details and timing specifications. A shared package does not guarantee identical environmental or grade requirements.
Thông tin tuân thủ
A component listing identifies the exact MPN as RoHS compliant and lead-free. No specific AEC-Q100 qualification is identified for A3P060-1VQ100.