Renesas Electronics

ISL84516IB - Low-Voltage Dual-Supply SPST Switch | Renesas

MPN: ISL84516IB ✓ نشط
+1.5 V to +6 V Vdss 20 ohm Rds(on) 8-SOIC Package
الحد الأدنى للطلب: 1 |

ISL84516IB نظرة عامة

The Renesas ISL84516IB is a low-voltage, dual-supply, single-pole single-throw analog switch with a 1:1 signal configuration, 20 ohm on-resistance and an 8-SOIC package. It is designed to operate from positive and negative supplies spanning ±1.5 V to ±6 V, making it suitable for precision analog signal-routing systems operating from low-voltage battery rails. Its stated low power consumption of 350 mW supports energy-conscious portable equipment.

An analog switch is a semiconductor device that routes signals between circuit nodes under digital control. The SPST designation identifies one independently selectable path, while the 1:1 configuration indicates a single signal path for each switch function. Within the broader hierarchy, the ISL84516IB is an analog switch, a discrete analog interface function, and ultimately an integrated circuit used for signal routing rather than voltage conversion.

The key benefits of the ISL84516IB include dual-supply operation from ±1.5 V to ±6 V, a specified 20 ohm on-resistance and low power consumption of 350 mW. The device family is described as a precision analog switch with excellent on-resistance flatness, making it useful when the resistance contribution of the switch must remain relatively consistent across the selected signal range. Low leakage current is another stated family characteristic relevant to battery-powered and high-impedance circuits.

The ISL84516IB belongs to the ISL84516 and ISL84517 precision analog-switch family. The ISL84516 variant provides a 1:1 switching arrangement, while the companion ISL84517 provides a different switch arrangement within the same low-voltage, dual-supply family. The IB ordering designation identifies the specific catalog configuration offered in the 8-SOIC package. Because this part operates from bipolar rails, its application circuitry must keep every driven terminal within the permitted supply range.

Typical applications include battery-powered portable instruments, low-voltage data-acquisition systems, precision analog test equipment and small-signal routing networks. The device can be paired with an ISL84516IB or ISL84517-family member where separate routing paths or complementary switching functions are required. Its low-voltage range is especially relevant to systems powered from single-cell lithium-ion batteries and rail-to-rail signal chains.

The primary design consideration is ensuring that the switch-control logic and analog signal amplitudes remain compatible with the dual supply rails. Layout should minimize parasitic capacitance around the signal pins and keep return-current paths short. Designers should also verify the on-resistance contribution against the source and destination input impedances before using the switch in precision attenuation or measurement paths.

This page combines the device's catalog identity, operating limits, package information and application guidance with practical routing considerations. It also identifies the limitation of the available substitution information: confirmed pin-to-pin alternatives require verification against the Renesas pin description and electrical characteristics before they can be treated as drop-in replacements.

بدائل مباشرة لـ ISL84516IB — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

ISL84516IB الحدود القصوى والخصائص الكهربائية

Device Type Precision analog switch
Switch Configuration Single-pole single-throw (SPST)
Number of Circuits 1 circuit
Signal Configuration 1:1
On-Resistance 20 ohm
Positive Supply Range +1.5 V to +6 V
Negative Supply Range -1.5 V to -6 V
Total Supply Span 3 V to 12 V
Power Consumption 350 mW
العلبة 8-SOIC
نوع التركيب Surface mount

دليل تكوين أطراف ISL84516IB 8-soic

تكوين الأطراف لـ ISL84516IB (حزمة 8-soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 8-soic لـ ISL84516IB

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ISL84516IB.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ISL84516IB مناسب لـ 6 التطبيقs: Battery-Powered Portable Instruments, Low-Voltage Data-Acquisition Systems, Precision Test and Measurement, Dual-Supply Signal Routing, Small-Signal Isolation Networks, Portable Sensor Interfaces.

📱

Battery-Powered Portable Instruments

The ISL84516IB fits low-voltage portable instruments that route precision analog signals between a sensor path, processing circuitry and an output stage. Its dual-supply operation from ±1.5 V to ±6 V accommodates bipolar signal nodes around a low-voltage system reference, while the family is designed around low power consumption of 350 mW and low leakage. The 1:1 SPST configuration keeps the signal path straightforward when the system must preserve a selected measurement channel. Designers should calculate dissipation in the actual switch state, maintain every terminal inside the permitted rails and use short PCB routes to limit added capacitance. The ISL84516IB is particularly appropriate when the portable instrument requires a defined routing function rather than a general-purpose multiplexer.

🖥️

Low-Voltage Data-Acquisition Systems

In a compact data-acquisition system, the ISL84516IB can route a selected low-level analog signal into a measurement or conversion channel. Its 20 ohm on-resistance is small compared with many high-impedance sensing paths, allowing the switch to contribute limited series resistance while providing a defined 1:1 connection. The ±1.5 V to ±6 V operating range supports bipolar front ends operating from low-voltage supplies. Designers should calculate the total acquisition error from the switch resistance, connector parasitics and the input impedance of the downstream converter. Keeping the switch close to the selected input node and separating its control trace from sensitive analog routing helps preserve signal integrity.

🔧

Precision Test and Measurement

The ISL84516IB is suitable for precision test and measurement equipment that connects a calibrated source, reference or measurement node through a controlled 1:1 path. Its family is characterized as a precision analog switch with excellent on-resistance flatness, which helps maintain predictable behavior as the selected signal range changes. The 20 ohm on-resistance must still be included in the complete signal-path calculation, especially when the system uses high source impedances. The 8-SOIC package supports compact instrument layouts, while ±1.5 V to ±6 V operation fits low-voltage analog backplanes. Place the device near the routed test node and provide a direct, low-impedance return path to minimize measurement errors.

🌐

Dual-Supply Signal Routing

The ISL84516IB is designed for systems that route signals around a zero-volt reference using positive and negative rails. Its operating limits of ±1.5 V to ±6 V give designers a clear range for bipolar signal nodes and control states. The SPST 1:1 arrangement provides a straightforward path for connecting or isolating one analog node. Because both rails are integral to operation, the system must maintain adequate headroom during startup and signal transitions. Decoupling near the supply pins, short analog connections and careful assignment of the control signal are essential for predictable behavior. This configuration is well suited to dual-supply sensor interfaces, signal-chain modules and compact precision analog boards.

📡

Small-Signal Isolation Networks

The ISL84516IB can be used as the isolation element in a small-signal analog network where a source must be connected to or disconnected from a downstream node. Its 20 ohm on-resistance contributes a defined series impedance when the switch is closed, while the SPST topology avoids unnecessary parallel signal paths. The family's low-leakage characteristic is useful where source impedances are high and off-state current could disturb the measured node. Designers should verify leakage at the actual operating temperature and compare the complete switch impedance with the source and destination impedances. Short traces, stable supply bypassing and a defined control-signal state during reset are important for consistent isolation performance.

🧩

Portable Sensor Interfaces

The ISL84516IB fits portable sensor interfaces that need to select a low-level analog signal without adding a high-power multiplexing stage. Operation from ±1.5 V to ±6 V supports compact bipolar sensor front ends, while the stated 350 mW power consumption and low-leakage emphasis align with power-constrained equipment. The 20 ohm on-resistance is generally modest for many sensor paths, but it must be checked against the sensor's output impedance and the acquisition input. Place the switch close to the protected or isolated node, keep supply return paths compact and confirm that the control logic cannot exceed the device's permitted input range during reset.

ملخص المنتجات الموصى بها

ISL84516IB Renesas Electronics يُستخدم في: Battery-Powered Portable Instruments, Low-Voltage Data-Acquisition Systems, Precision Test and Measurement, Dual-Supply Signal Routing, Small-Signal Isolation Networks, Portable Sensor Interfaces ISL84517 Related family member with a different switching arrangement يُستخدم في: Battery-Powered Portable Instruments, Low-Voltage Data-Acquisition Systems, Precision Test and Measurement, Dual-Supply Signal Routing, Small-Signal Isolation Networks, Portable Sensor Interfaces
What is the ISL84516IB?
The ISL84516IB is a Renesas low-voltage, dual-supply, single-pole single-throw precision analog switch packaged in an 8-SOIC. It provides one 1:1 signal path with an on-resistance of 20 ohm. According to the Renesas datasheet, the device operates from ±1.5 V to ±6 V and is intended for low-voltage signal-routing applications, including battery-powered equipment requiring low power consumption and low leakage current.
What is the supply voltage range of the ISL84516IB?
The ISL84516IB operates from +1.5 V to +6 V on the positive rail and from -1.5 V to -6 V on the negative rail. According to the Renesas datasheet, this corresponds to a total supply span from 3 V to 12 V. Both rails are required because the switch supports bipolar analog signals; designers should not treat the device as a conventional single-supply switch.
Where can I download the ISL84516IB datasheet PDF?
The ISL84516IB datasheet PDF is available through the datasheet links listed on this page. The manufacturer document describes the ISL84516 and ISL84517 precision analog switches, their ±1.5 V to ±6 V operating range, low power consumption, leakage characteristics and switching behavior. Use the Renesas datasheet pin-description table and electrical-characteristics tables as the controlling references for circuit design.
Where can I find the ISL84516IB pinout?
The ISL84516IB uses an 8-SOIC package, and its complete pin assignment is identified in the Renesas datasheet pin-description table. The pinout should be read together with the recommended operating circuit because the device uses dual analog supplies and a digital control input. This page does not reproduce individual pin names because they were not included in the accessible manufacturer excerpts; consult the pin table before assigning PCB tracks.
What are the key specifications of ISL84516IB that engineers should know?
The principal ISL84516IB specifications are dual-supply operation from ±1.5 V to ±6 V, a 20 ohm on-resistance, a 1:1 SPST signal configuration and a stated power consumption of 350 mW. The Renesas datasheet also identifies low leakage and excellent on-resistance flatness as family characteristics. These parameters make the switch most relevant to low-voltage, low-power precision analog-routing circuits.
Where can I buy ISL84516IB online?
The ISL84516IB can be requested through the Request a Quote form on this page. The form allows you to specify the required quantity, package form and delivery requirements without relying on a static online listing. Current commercial availability should be confirmed through the quote workflow because channel inventory, lead time and fulfillment conditions can change independently of the device specifications.
What is the price of ISL84516IB?
Use the Request a Quote form on this page for the current ISL84516IB price and quantity breaks. Pricing depends on order quantity, package form, inventory position and fulfillment terms, so a static figure can become obsolete. The form provides a channel for obtaining a current commercial quotation tailored to the requested order rather than publishing a potentially stale amount.
What is the lead time for ISL84516IB?
Request the current ISL84516IB lead time through the Request a Quote form on this page. The lead time depends on the ordered quantity, package configuration and current channel inventory. The manufacturer documents identify the device as an orderable catalog part, but they do not establish a fixed lead time for every order size, so the quotation workflow is the appropriate source for a scheduling commitment.
Is ISL84516IB in stock?
Current ISL84516IB inventory should be checked through the Request a Quote form on this page. The form is the appropriate route for a stock confirmation because available quantities can change by package form and order size. If immediate material is required, include the required quantity and date code requirements in the request so the fulfillment response reflects the actual purchasing need.
When should I choose ISL84516IB over another single-pole analog switch?
Choose the ISL84516IB when the design needs a precision 1:1 SPST route, a 20 ohm on-resistance and operation from bipolar supplies within ±1.5 V to ±6 V. It is especially suitable for compact, low-voltage equipment where the switch family is designed for low power consumption and low leakage. A different switch should be selected when its lower resistance, faster transition time or extended supply range is required.
Is the ISL84516IB suitable for battery-powered instrumentation?
The ISL84516IB is suitable for battery-powered instrumentation that uses bipolar rails within ±1.5 V to ±6 V. Its stated 350 mW power consumption and the family's low-leakage emphasis are consistent with portable signal-routing requirements. The system designer must still calculate total rail power under the actual switching state and confirm that every control and analog terminal remains within the permitted voltage range.
What is the best drop-in replacement for ISL84516IB?
No alternative with enough published pin-level and electrical information was confirmed as a drop-in replacement for the ISL84516IB. A suitable replacement must match the 8-SOIC footprint and pin functions while preserving the 1:1 SPST topology, 20 ohm-class switching behavior, dual-supply range and control-logic requirements. Use the Request a Quote form for the original device, and validate any proposed substitute against the Renesas datasheet before redesigning.
Can ISL84517 replace ISL84516IB?
The ISL84517 is a member of the same ISL84516 and ISL84517 precision analog-switch family, but it provides a different switching arrangement. It should not be treated as an automatic drop-in replacement for the ISL84516IB without checking the pin description and signal topology. The ISL84516IB specifically uses a 1:1 configuration, so the replacement decision must preserve that routing behavior.
What is the best Renesas equivalent for ISL84516IB?
The ISL84517 is the closest identified Renesas-family comparator because both devices are low-voltage, dual-supply SPST analog switches in the same datasheet family. However, their signal configurations differ, so the ISL84517 is not a confirmed pin-for-pin substitute for the 1:1 ISL84516IB. Use the manufacturer pin table and functional diagrams to determine whether the different routing arrangement is acceptable.
ISL84516IB versus ISL84517 - which is better for signal routing?
The ISL84516IB is the appropriate choice when a 1:1 signal-routing configuration is required, while the ISL84517 suits designs that need the alternate switch arrangement defined by that family. According to the Renesas family datasheet, both devices target low-voltage, dual-supply precision switching from ±1.5 V to ±6 V. The deciding factor is therefore the required signal topology, followed by verification of pin compatibility and control logic.
How should layout be handled for a low-voltage analog switch?
Place the ISL84516IB close to the signal source and destination, keep connected analog traces short, and minimize parasitic capacitance on the signal pins. Route control and return paths away from sensitive inputs where practical. Confirm that signal amplitudes and control levels remain inside the ±1.5 V to ±6 V dual-rail limits, and evaluate the 20 ohm on-resistance as part of the total source and destination impedance.

بيانات مرجعية هندسية لـ ISL84516IB — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ISL84516IB for a low-voltage precision circuit that needs one 1:1 SPST route and bipolar operation from ±1.5 V to ±6 V. It is a strong fit for battery-powered instruments, portable sensor interfaces, data-acquisition inputs and precision test equipment where low power consumption and low leakage are important. Evaluate its 20 ohm on-resistance against the complete source and destination impedance before selecting it for high-accuracy or high-frequency paths. Choose the ISL84517 only when its different switching arrangement provides the required routing and its pin functions have been checked against the target design. For alternatives requiring lower on-resistance, faster switching, wider supply limits or a different package, use a separately qualified device rather than assuming family-level interchangeability.

المقارنة مع البدائل

المعامل هذا المنتج
Brand Renesas Electronics
Package 8-SOIC
Device Type Precision analog switch
Switch Configuration Single-pole single-throw (SPST)
Signal Configuration 1:1
On-Resistance 20 ohm
Positive Supply Range +1.5 V to +6 V
Negative Supply Range -1.5 V to -6 V
Total Supply Span 3 V to 12 V
Power Consumption 350 mW

أبرز الفروقات

  • Defined 1:1 precision signal-routing configuration (مقابلISL84517)
  • Low-voltage bipolar operating range (مقابلGeneral-purpose single-supply analog switches)
  • Low-resistance precision switching (مقابلHigher-resistance CMOS analog switches)

ملاحظات التصميم

Treat the 20 ohm on-resistance as part of the complete signal-path impedance rather than as an isolated specification. Check it against the source output impedance, destination input impedance and required measurement accuracy. For high-impedance nodes, also evaluate off-state leakage, since it can create an error current that is significant relative to the measured signal. Place the switch close to the sensitive node and minimize trace length to reduce added capacitance.

The device operates from bipolar rails spanning ±1.5 V to ±6 V. Confirm that startup, reset and normal signal transitions cannot drive any connected pin outside its specified voltage range. Provide local supply bypassing and a low-impedance return path, then evaluate the system's total supply dissipation rather than using the 350 mW figure as a universal operating-point result. Control levels should remain compatible with the selected supply conditions.

Route the analog signal pins directly between the switch and their intended source and destination nodes. Keep the control trace away from sensitive analog inputs where practical, and use a solid ground or return plane to limit coupling. Avoid long branches beneath or beside the 8-SOIC device. Because the package has eight leads, verify the footprint and pin numbering against the manufacturer pin table before PCB release.

Do not assume that every switch in the ISL84516 and ISL84517 family has the same signal topology. The ISL84516IB is identified as a 1:1 SPST device, while a family member may provide a different routing arrangement. Also avoid using a single-supply circuit diagram as a direct substitute for the dual-rail application circuit. Validate logic states, supply sequencing and signal-node limits before fabrication or board bring-up.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance status is unknown because the accessible product excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals status. Verify these attributes from the current manufacturer product documentation before procurement.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ISL84516IB datasheet ISL84516IB pinout ISL84516IB datasheet pdf ISL84516IB specifications ISL84516IB 8-SOIC Renesas ISL84516IB ISL84516IB equivalent ISL84516IB replacement ISL84516IB vs ISL84517 ISL84516IB price ISL84516IB stock ISL84516IB application circuit

المكونات والمصطلحات ذات الصلة

Renesas Electronics Intersil ISL84516IB ISL84517 precision analog switch analog switch SPST switch single-pole single-throw switch 1:1 signal configuration low-voltage switch dual-supply analog switch positive rail negative rail on-resistance signal routing battery-powered equipment leakage current on-resistance flatness 8-SOIC SOIC package family surface-mount package data acquisition precision measurement integrated circuit
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر